Power Equipment

Curriculum Vitae - David Smith

Personal Details

Name: David John Smith

Date of Birth: 06 / 12 / 1964

Address: ** ******* ***

Beaumont Hill

Darlington

Co. Durham

DL1 3NE

Mobile: 078********

Email: ******@*******.**.**

Marital Status: Single

Introduction

I am a fully qualified industrial electrician with over 25 years’ worth of experience

working on LNG Power stations, Petro-Chemical plants as well as Offshore

Installations. I am qualified to Atex standard EXO1, EXO2, EXO3 and EXO4

and I am experienced in installation, testing and inspection of all Atex equipment.

I have experience of management of E & I works, health and safety and insuring

all works comply with current legislation. I have been responsible for the

verification of all documents and snag sheets to comply with client’s

requirements. Furthermore, I am a professional person with excellent

communication skills and always have a professional attitude towards my client’s

requirements. I firmly believe that there is no such thing as problems, only

solutions.

Qualifications

Apprenticeship in electrical installations Theory and Practical City and Guilds Achieved

NVQ LEVEL 3

Other Qualifications and Skills:

*Ace card diploma.

*Compex

*Offshore Survival and Medical Certificate

*Nuclear Cleared

*Safety Passport 631019 Expiry Date: 10/06/2012

*17th Edition Wiring Regulations 7161

*2391 Test and Inspection

Feb 2013 to Present day

OFF SHORE INTALLATION – D ISLAND, EXPERIMENTAL OIL & GAS REFINARY

Agip KCO – Kazakstan

Job Title – E I Inspector

Duties: To inspect all hazardous equipment – ie. Detail inspections and visual inspections

using an electrician supplied to me, all repairs carried out when necessary. Authorized

person, issuing Permits to Work and Authorizing them. To fill in and prepare reports with all

relevant information on documents, get all docs signed off by the superintendent and supply

the client with finished Atex register. Ensure that everything complies with all Atex legislation

and insure all drawings and schematics are up to date.

June 2012 to Feb 2013

Balfor Beaty – Grangemouth Refinary, Scotland

Job Title Atex Inspector

Duties: Authorized person, issuing Permits to Work and authorizing them. Testing and

inspecting all Atex equipment, eg: Line of sight, fire and gas detection equipment,

receivers and transmitters, X & X boxes, splitter boxes and panels. Full verification of all

positions of Atex equipment, to ensure that drawings are accurately matched and, or

amended. To manage all testing and inspections to the clients requirements. To complete

documentation and ensure the client is in receipt of all signed and completed certification

of their asset. To ensure that all testers work to a permit and carry out a point of work risk

assessment and discuss any changes required.

Sept 2011 to June 2012

Balfor Beaty Corus, Redcar Blast Furness

Job Title – E & I Electrician

Duties: Installation of Atex equipment, probes, thermo couples, JB boxes, installation of

SWA cables, glanding and terminating, looming and terminating of panels to drawings.

Involved in planned coordination and managing of E & I works activities. Controlling and

checking equipment to match all drawings, to insure the correct position of Atex equipment

and witness and review ITP.

July 2011 to Sept 2011

Siemens field services power stations outages gas steam generation

Job Title – E & I Electrician

Duties – Full Compex inspection of Atex equipment in and around the gas turbine, and

report given to client. Disconnect, control, instrument, power cables. Disengage exhaust

shaft baring probes speed probes and thrust shaft probes. Rear shaft speed controls,

generator anti vibration probes .disconnect ball valves, then reconnect all after gt shaft

replacement, set all probes to 9.5 volts speed controls to 2.2 mm using feler gauges.

Limit switches, lift oil motors, reconnections. Test all valves for leaks, Test and

commission all works.

May 2010 to June 2011

Employer: AMEC – working on the West Burton Power Station

Job Title – E & I Electrician

Duties: Installation of control instrumentation and power cables, glanding and

terminations in joint boxes and panels. Carrying out a full assessment of planned E & I

works and completing all relevant documentation. To supervise the full installation of

HVAC equipment and to ensure that permits and risk assessments are adhered to.

June 09 to May 2010

Employer: S L P Offshore Ltd. THE BABAGE CONSTRUCTION PROJECT (JACK UP)

Job Title – Atex Electrician

Duties: Installation and glanding of braided cable (20mm to 35mm), instrument and control

cables, telemetry cables and PCU work. Installation of line of site gas detection, flame

and MAG points. Installation of detectors, alarms and general PA speaker systems. Full

Test and Commission of work. Full Compex inspection carried out, fill in test and

inspection sheets.

March 09 to June 09

Employer E Tech – Working for Shell UK

Job Title – Atex Inspector

Duties: Working on the Fox1 (Jack up) decommissioning the Indie Killo

To supply temporary lights for Shell and to connect generators to MDU for welding points.

Supply accommodation with temporary power for shell UK and run fibre optic cables.

Carry out a full test and Atex inspection on all equipment. Carry out a full verification of all

equipment to be de commissioned and log on register.

July 2008 – March 2009

Employer: Hartlepool Power Station – Balfor Kilpatricks

Job title: E & I Electrical Technician

Duties: Installation of tray trunking – Installation of instrument cables and power cables

glanding and termination of the above cables – Install of instruments

Install of BCU bands and calibrations using computer technology, test and commission.

Carry out all aspects of maintenance and replace old equipment

March 2008 – July 2008

Employer: First Engineering Ltd

Job Title: E & I Electrician

Duties: Tasks that I am undertaking, are, installation of IS, and EX equipment throughout

the site. Also to inspect and test said equipment after install, further general maintenance

to site equipment this site is a chemical storage plant…

Jan 2007 – March 2008

Employer: Watson Norie. l.N.G gas pipe line Wales

Job Title: E & I Electrician ( Atex Inspector/Supervisor)

Duties: The overseeing of all Installation of compex equipment ie, instruments, power

cables, glanding of power cables all containment –trunking, conduit, tray, ladder. Co

ordination and managing of E & I activities, witness and reviewing ITP’s. Checking all

Atex equipment as per the drawings and adjusting the drawings as necessary, ensuring

that all Atex documentation is correct for the client.

Nov 2006 Jan 2007

Employer: Aiken Group for Amec. The Clyde Oil Platform Off Shore

Job Title: Electrical Technician

Duties: I completed 7 trips with this company, my duties were to carry out reactive

maintenance of Atex equipment and Atex inspections and assessments of all planned E &

I works.

Jan 2006 Nov 2006

Employer: BBL Technical,

Tanker conversion, Rotterdam.

Job Title: Supervisor

Duties: To oversee and manage all installation work. Compex install stainless steel.

Containment, lighting, panel wiring. Migweld power points, helicopter landing pad lights.

Regular meeting with the site engineer to discuss the full co ordination and managing of all

work activities. Ie – permits to work, risk assessments, tool box talks and health and

safety.

Feb 2006 December 2006

Employer:

Isle of grain LMG plant for Watson Norie

Job Title Supervisor

Duties: To oversee and manage all installation works and the test and inspections.

Compex install. Instruments, transmitters, gas probes and test & commission.

Jan 2000 Dec 2005

Employer: Corus. For W H Smiths

Job Title – E & I Electrician

Duties: Maintenance of all coke side plant, including compex work & installation of cables,

power & EXI cables. Working on gas side containment tanks, lighting, power & probes.

REFERENCES AVAILABLE ON REQUEST

Contact this candidate