CURRICULUM VITAE
OF
JOHN PAUL G. LANARIO
Date of Birth : 11 February 1981
Marital Status : Married
Nationality : Filipino
Passport No. : EB2535785
Expiry Date : May 23, 2016
Address : No. 08-825 Blk. 148 woodland St. 13 Singapore 730148
: Bgy. Calubang, Ilog, Negros Occidental,
Philippines
Contact No. : +659******* - Singapore Mobile
: +639********* - Philippine Mobile
: +65196748 - Singapore Residence
Email Address : ab22hv@r.postjobfree.com
: ab22hv@r.postjobfree.com
EDUCATIONAL AND TECHNICAL QUALIFICATION:
Primary : Dancalan Elementary School (1988-1994)
Secondary : Immaculate Conception Academy (1994-1998)
College : West Negros College - Bacolod City, Philippines
Course : Bachelor of Science in Electrical Engineering (B.S.E.E.)
: 3rd Year College (1998 - 2002)
SEMINAR AND TRAINING ATTENDED:
BASIC OFFSHORE SAFETY INDUCTION & EMERGENCY TRAINING (B.O.S.I.E.T.)
SMTC Singapore -November 08, 2012 - November 11, 2016
SUMMARY OF EXPERIENCE:
Have been working 10 years in shipbuilding FPSO and industrial plant
projects involving lay-out, installation, cable glanding, cable
termination, calibration, loop checking, repair, and trouble shooting.
testing and commissioning of equipment and various facilities. With
capacity to interpret electrical and instrumentation system drawings.
Enforced the HSE policy and procedures with in my area of responsibility.
My duties and responsibilities involved co-ordination, quality control,
field Inspection to ensure the general acceptability of the field process
instrument, F & G, Installation and equipments meet the relevant project
standard as per the confirmation hand-over the Process mechanical
completion (PMC) to Commissioning department prior preparation for pre-
commissioning & commissioning activities.
Performed loop check, testing and record the effects of varying conditions,
actual or simulated, such as vibration, temperature, humidity, pressure,
differential pressure, flow and level, acceleration, pH, conductivity,
control valve, SDV, ESDV, BDV and involved in hot and cold SAT. and Create
a report about the jobs performed.
Computer literate in MS Office 2010.
EMPLOYMENT HISTORY:
Company : Pacific Oriental Pte. Ltd.
: 400 Orchard Road Suite 13-08 Orchard Towers Singapore
238875
Position : Senior Electrical Commissioning Technician
Project : ExxonMobil Telok-A Gas Development (OFFSHORE)
Project Site : Terengganu, Malaysia
Exclusive Date : NOVEMBER 2012 - MARCH 2013
DUTIES AND RESPONSIBILITIES:
* Performed commissioning on electrical equipments such as lightings, power
distribution panel generators, motors, and motor controls.
* Performed loop and continuity check on all wiring and termination,
insulation resistance and test all cables and wiring.
* Perform injection test on all protection relay and metering, check fuses
rating and protection setting.
* Performed uncoupled and coupled test run and monitoring of all motor
drives.
* Responsible for paper works checklist such as equipment description,
principles, rating ranges, test records and inspections.
* Performed and execute safety electrical locked-out/tag out and energy
isolation safety procedures.
* Assist in powering up UPS and DC Panel
* Loop checking of electrical lightings from lighting panel to field and
check for insulation resistance.
* Testing and commissioning of Motor Control Center (MCC) such as breakers,
current transformer, potential transformer, overload relay, ground fault
relay, and contactors.
* Check and rectify in-correct electrical installation in punch list items
make corrective measure on backlog and prepare a red line mark up drawing
for as built.
* Performed commissioning on electrical equipments such as lightings, power
distribution panel generators, motors, and motor controls.
* Performed loop and continuity check on all wiring and termination,
insulation resistance and test all cables and wiring.
* Perform injection test on all protection relay and metering, check fuses
rating and protection setting.
* Performed uncoupled and coupled test run and monitoring of all motor
drives.
* Responsible for paper works checklist such as equipment description,
principles, rating
ranges, test records and inspections.
Company : BW Offshore
Position : Senior Electrical Commissioning Technician
Project : BW FPU Joko Tole
Project Site : Batam, Indonesia
Duration : JANUARY 2012 - MAY 2012
DUTIES AND RESPONSIBILITIES:
* Familiarize the applicable project drawings and specifications which
include but not limit to package of instrumentation components for Fire
and Gas System, Fire Water System, Fusible Plug system, Air Compressors,
Chemical Injection System, cabling termination and field instruments.
* Assist for the installation, termination of cable trays, continuity and
function test of wiring alarm devices and equipment control circuit.
* Carried-out site inspection, continuity and function test of instrument
and machineries.
* Enforced the HSE policy and procedures with in my area of
responsibility.
* Inspect and monitor cable pulling for pump motors, heat exchangers, fire
water storage, heating medium package and instrument air skid.
* Checked and verify the installation instrument components, recording of
missing and damage components, updating and mark up in approved drawings
* Provide technical assistance/advice in area of expertise to inter-
company inspectors as requested.
* Work closely with the client, rig crews and other inspectors in a highly
professional and courteous manner.
* Conduct maintenance system reviews and/or author new maintenance
procedures in accordance with OEM/industry recommended procedures and
standards.
* Develop and carry out incident investigations using root cause analysis
methods.
* Arrange, carry out and document pre-job/close-out meetings with the
client and rig personnel.
* Author and/or edit inspection, overhaul, acceptance and incident
investigation reports in a timely manner.
Company : Saipem Pte. Ltd.
Position : Sr. Electrical Commissioning Technician
Project : FSRU Livorno
Project Site : Dubai, U.A.E.
Duration : JULY 2010 - NOVEMBER 2011
DUTIES AND RESPONSIBILITIES:
* Involved in line up of instrument. Field calibration and Transmitter
performance check.
* Conducting in loops Checking activities in motor controls room MCC such
as terasaki switch gear LV, MV, HV power capacity.
* Calibration of electronics measuring Transmitter Temperature, Pressure,
Level and Flow. Using multi function process calibrator druck DPI 620.
* Loop checking simulating of toxic gas detector, gas detector, combustible
Gas detector and flame detector.
* Loop checking of all types of instrument process
* Loop Checking of pH Analyzer, Oxygen analyzer, moisture analyzer
Conductivity Analyzer.
* Conducting loop checking commissioning of hydraulic control valves in
main deck area.
* Calibration of process instruments
* Conduct cold and hot loop checking and commissioning of Burner Management
System
* Troubleshooting of Rosemount Transmitters and valve controllers
* Loop check and functional test of all fire & gas instruments
* Knowledge in operating DCS, PCSS YUKOGAWA CS 3000
* Develop and carry out incident investigations using root cause analysis
methods.
* Arrange, carry out and document pre-job/close-out meetings with the
client and rig personnel.
* Author and/or edit inspection, overhaul, acceptance and incident
investigation reports in a timely manner
Company : Air Energi Group
Position : Senior Electrical Commissioning Technician
Project : FPSO Bohai Conoco Philips
Project Site : Sembawang Shipyard, Singapore
Duration : APRIL 2008 - DECEMBER 2008
DUTIES AND RESPONSIBILITIES:
* Performed commissioning on electrical equipments such as lightings, power
distribution panel generators, motors, and motor controls.
* Performed loop and continuity check on all wiring and termination,
insulation resistance and test all cables and wiring.
* Perform injection test on all protection relay and metering, check fuses
rating and protection setting.
* Performed uncoupled and coupled test run and monitoring of all motor
drives.
* Responsible for paper works checklist such as equipment description,
principles, rating ranges, test records and inspections.
* Performed and execute safety electrical locked-out/tag out and energy
isolation safety procedures.
* Assist in powering up UPS and DC Panel
* Loop checking of electrical lightings from lighting panel to field and
check for insulation resistance.
* Testing and commissioning of Motor Control Center (MCC) such as breakers,
current transformer, potential transformer, overload relay, ground fault
relay, and contactors.
* Check and rectify in-correct electrical installation in punch list items
make corrective measure on backlog and prepare a red line mark up drawing
for as built.
* Heat Tracing.
Company : Multi Resources & Services Pte. Ltd.
: # 09-53 Harbour Commissioning Front Center Singapore
099253
Position : Instrument Commissioning Technician
Project : FPSO Saxi, Single Buoy Moorings (SBM)
Project Site : Keppel Shipyard, Singapore
Duration : OCTOBER 2007 - MARCH 2008
DUTIES AND RESPONSIBILITIES:
* Conduct cold and hot loop checking and commissioning of Burner
Management system.
* Simulation and functional testing of Fire & Gas detectors by monitoring
the alarm in AUTRONICA panel and DCS controller.
* Facilitate installation of SVI II ESD Masoneilan valve Positioner.
* Functional Test of Fire and Gas Instruments such as Open Path Gas
Detector, Point Gas Detector, Flame, Heat, Smoke and H2S Detector.
* Performing for Bench Calibration of Process Measuring Instrument using
special tools and Calibration Equipment.
* Conducting in loops Checking activities in motor controls room MCC such
as ABB switch gear LV, MV, HV power capacity.
* PLC and DCS commissioning of Input-Output Signals AI - AO - DI- DO
system.
* Calibration Check of Process Variable Transmitters/Positioner, On/Off
Valves (SDV/BDV), HVAC Control and Damper and Fire Damper Actuator.
* Conducting loop checking commissioning of hydraulic control valves in
main deck and pump room area.
* Supervision of sub-contractor activities installation of all Fire & gas
on top side. Ensure that engineering activities made according to
standard to hand-over.
* Conduct cold and hot loop checking and commissioning of Burner
Management system.
* Simulation and functional testing of Fire & Gas detectors by monitoring
the alarm in AUTRONICA panel and DCS controller.
* Facilitate installation of SVI II ESD Masoneilan valve Positioner.
* Functional Test of Fire and Gas Instruments such as Open Path Gas
Detector, Point Gas Detector, Flame, Heat, Smoke and H2S Detector.
* Performing for Bench Calibration of Process Measuring Instrument using
special tools and Calibration Equipment.
* Conducting in loops Checking activities in motor controls room MCC such
as ABB switch gear LV, MV, HV power capacity.
* PLC and DCS commissioning of Input-Output Signals AI - AO - DI- DO
system.
* Calibration Check of Process Variable Transmitters/Positioner, On/Off
Valves (SDV/BDV), HVAC Control and Damper and Fire Damper Actuator.
* Conducting loop checking commissioning of hydraulic control valves in
main deck and pump room area.
* Supervision of sub-contractor activities installation of all Fire & gas
on top side. Ensure that engineering activities made according to
standard engineering design.
* Carry out in punch list clearing.
Company : Total Automation Pte. Ltd.
: 45 Gul Drive Singapore
Position : Electrical Commissioning Technician
Project : FPSO Polvo
Project Site : Keppel Shipyard, Singapore
Duration : JANUARY 2007 - SEPTEMBER 2007
DUTIES AND RESPONSIBILITIES:
* Performed commissioning on electrical equipments such as lightings, power
distribution panel generators, motors, and motor controls.
* Performed loop and continuity check on all wiring and termination,
insulation resistance and test all cables and wiring.
* Perform injection test on all protection relay and metering, check fuses
rating and protection setting.
* Performed uncoupled and coupled test run and monitoring of all motor
drives.
* Responsible for paper works checklist such as equipment description,
principles, rating
ranges, test records and inspections.
* Performed and execute safety electrical locked-out/tag out and energy
isolation safety procedures.
* Assist in powering up UPS and DC Panel
* Loop checking of electrical lightings from lighting panel to field and
check for insulation resistance.
* Testing and commissioning of Motor Control Center (MCC) such as breakers,
current transformer, potential transformer, overload relay, ground fault
relay, and contactors.
* Check and rectify in-correct electrical installation in punch list items
make corrective measure on backlog and prepare a red line mark up drawing
for as built.
Company : Tsuneishi Heavy Industry
Position : Electrical Technician
Project : Ship Building and Repair
Project Site : Cebu, Philippines
Duration : OCTOBER 2004 - SEPTEMBER 2006
DUTIES AND RESPONSIBILITIES:
* Familiarize the applicable project drawings and specifications.
* Prepare as-built plan of actual wiring connection on site.
* Carried-out installation of wiring and termination of cable trays, panel
boards, signal, alarm devices and equipment control circuit.
* Carried-out site inspection, continuity and function test of instrument
and machineries.
* Ensure that plan activities are being carried-out based on time its time
frame.
* Enforced the HSE policy and procedures with in my area of responsibility.
* Follow-up the daily work schedule and generates daily activities report.
Company : BISCOM Sugar Central
Position : Electrical Technician
Project : Extension Phase of BISCOM Sugar Central
Project Site : Binalbagan, Negros Occ., Philippines
Duration : OCTOBER 2002 - OCTOBER 2004
DUTIES AND RESPONSIBILITIES:
* Carried-out installations of high and low voltage distribution
transformers, battery charger and emergency diesel Generator.
* Inspect and monitor cable pulling for pump motors, heat exchangers, fire
water storage, heating medium package and instrument air skid.
* Field inspection of equipment and raise punch list as required.
* Monitor loop checking and glanding of cables from designated switchboards
and equipments.
* Prepare check sheets of tested equipments prior to hand-over.
* Perform remote and local start / stop switch testing and ensures that it
functions accordingly.
* Enforced the HSE policy and procedures with in my area of responsibility.
Generate daily activities report.