Objective:

Professional Experience:

Senior Structural Designer

SBM Offshore 1255 Enclave Parkway, Houston, TX, 77077 Present

< Project Shell Stones FPSO

< PDMS, 3D CAD design / drafting

< Navisworks, 3D model view layouts

Marine Systems (Field Engineer) April 2012 -

October 2012

Kiewit-off-shore, Terra Nova FPSO refit. 193,049 ton, LOA 292.2m

< Pipe repair Supervisor

< Field Engineer (Coordinate Welding, NDT, Hydro, Paint, Electrical,

Insulation & Doc. sign off)

< Performing Authority for job site.

< Safety and Quality (Qualified Gas Tester)

< Building Work Packages. (Creating & Reviewing work pack scopes)

< Planning and Scheduling

Marine Engineer (2nd Engineer) January 2012 - March

2012, Ocean Going Tug 6434 Hp, 729 ton - LOA 45.7m

Main Eng. 2 x MAK 8M25 8 cylinder, Shaft Gen. 720kw, 2 x Volvo Gen. 175 kw

< Watch keeping duties

< Performing maintenance on a variety of equipment.

< Troubleshoot systems

< Repair breakdowns quickly to maintain operating efficiency

< Maintaining safety among Vessel & Crew.

Marine Engineer (Commissioning Engineer of Drill Ships) May

2011 - December 2011

M/V Bully I & M/V Bully II, Noble, Drill Ship 45000 ton - LOA 180m

Noble Drilling, 55, Gul Road, Singapore. Talon Energy Services

< Vessel Commissioning. & Systems commissioning. (Fuel, Sea water cooling,

Fresh Water, Rig air, Drilling & Population)

< Providing technical support to the client.

< Mechanical Technician.

< Marine Engineer Fourth Class, Motor Ship.

< Perform maintenance on a large variety of equipment. Troubleshoot

systems and repair breakdowns quickly to maintain operating efficiency,

while still maintaining safety among crew.

Marine Engineer April 2011 - May 2011

M/V ARLUK II Fishing Vessel, LOA 96 FT.

Niqitaq Fisheries LTD. 53 Bond Street, Suite, ST, JOHN'S, NL, A1C 1S9

< Ship Refit / Ship overhaul.

< New Gear box install.

< New shafting systems install.

Marine Engineering Cadet 3rd Work Term September 2010 -

December 2010

M/V FLANDER Car & Passengers Ferry, Gross Tonnage 1035t - LOA 53.8m (176.5'

ft)

NEWFOUNDLAND & LABRADOR DEPARTMENT OF TRANSPORTATION

ST, JOHN'S, NL

< Main Engines - Two DEUTZ S/BVM628 2200 KW

< Aux Engine- Two caterpillar 437.5 KVA 460/3/60 0.8PF

Marine Engineering Cadet 2nd Work Term June 2010 -

August 2010

M/V ALGOEAST Oil Tanker, Gross Tonnage 7886 - LOA 131.5m (431'ft)

ALGOMA TANKERS LTD - St. Catharine's, Ontario, Canada

< Main Engine - One HITACHI B&W 5300KW

< Boiler - One OSAKA 9600kg/hr * 12.27 kg/ cm2

< Aux Engines - Three 875 KVA DAIHATSU DIESEL 8PSHTc-26D

Senior Designer/Technologist.

Edison Chouest Offshore-North American Shipbuilding,

September 2009-December 2009

Larose, Louisianan, USA.

< Major modifications and conversion to Supply Vessel. (Cut in half &

added 56ft)

< Large anchor handing winch replacement.

< ROV deck & Heli deck addition.

< Structural Outfitting

< 3-D Modelling (Using Ship Constructor)

Marine Engineering Cadet 1st Work Term January 2009 -

April 2009

MT Vinland Crude oil Tanker, Gross Tonnage 76,567 - LOA 271.8m (891'ft)

CANSHIP UGLAND LTD - ST. John's Newfoundland, Canada

< Main Engines - Two 12,700 BHP Samsung Man B&W

< Oil Fired Boiler - Two Mitsubishi 25,000 kg/h * 16kg/cm2

< Aux Engines - Four Samsung Man-B&W, Two 3000kW and Two 2259kW

< Inert Gas Plant-Boiler flue gas type with 2 inert gas fans, each

capacity16,250Nm3/h

< Fresh Water Generator - 30 tonnes/day

Naval Architect & Marine Systems Designer July 2008 -

Nov 2008

Manitowoc Marine Group, - Marinette Marine Corporation. April

2006 - Sept 2007

Marinette, Wisconsin, USA. Aug 2002 - May

2005

* Project; US Coast Guard Icebreaking/Buoy Tender Ship (USCG MACKINAW)

* Structural Designer

* Structure Scantlings Detail Drawings

* Modular pre-assembled packages

* Material Take Offs

* Issue drawings

* Issue Work-Packs

* Module Fabrication & Erection Sequence

* Material take off from scantlings drawings

* 3-D Modelling (Using Ship Constructor)

* 3-D Structural Assembly Drawings (Using Ship Constructor)

* Project; US Navy Improved Navy Lighterage System, 7 Different vessels.

* Liaising between Ship Yard & Design Office. Provide field engineering

support for fabrication.

* Produce material lists and weight & centre calculations reports.

* Performed quality control inspections & surveys

Naval Architect & Marine Systems Designer Nov 2000 -

July 2002

Rowan Companies, Inc. - LeTourneau Inc. June

2005-April 2006

Vicksburg, Mississippi, USA.

* Project; "Gorilla VII & VIII" Super XL Class (Offshore Jack up Drilling

Rigs)

* Structural Drawings (Bulk Heads, Decks Foundations& Outfitting)

* Performed quality control inspections & surveys

* Piping Drawings (spools & P& ID's)

* Piping Design (Conduits) Electrical Equipment

* Electrical Bulk Heads & Decks Penetrations

* Electrical Equipment arrangements & layouts

* Developed 3-D Design drawings and 2-D fabrication drawing using AutoCAD.

* Electrical Foundation's Drawings.

* Cable raceway layout, routing & transits.

* Created material lists.

* Work Packs

* Project; "Tarzan Class" (Offshore Jack up Drilling Rigs)

* Field survey production changes and incorporate information into existing

drawings to produce "As-builds" drawing for project.

* Direct Field Engineering support for Production during construction.

Naval Architect & Marine Systems Designer April

2000-Sept 2000

MIL Systems Naval Architects & Marine System Engineers

Ottawa, ON, Canada.

* Lofting Group, Design and Production Services (Ship Structure)

* 3-D Structural Assembly Drawings (Using Ship Constructor)

* Assembly Drawing Package & Work Packs - Process and Checks (Using Ship

Constructor)

* Lofting Quality Assurance (Certified to ISO 9001)

* Steel Plate Nesting Drawings / NC Programs & Software

Marine Engineering Systems Designer & Quality Assurance Sept

1999 - April 2000

Fish King Equipment Inc.

Capebroyle, NF, Canada

< Undertook the completion of a complete set of 3-D engineering design

drawing for the Companies computerized fish splitting machine.

< Completed engineering design studies and modifications to machine parts

to make them cheaper and easier to build as well as more durable.

< Participated in production planning studies that included time motion

studies of company operations.

< Performed quality control inspections on incoming machine parts to insure

they were made according to company specifications.

< Undertook reviews of sub-supplier documentation to ensure that sub-

suppliers had the most up to date information.

< Produced design drawings for various piping and mechanical system

Education

Marine Engineering Technology May

2010

Marine Institute of Memorial University

St. John's, NF, Canada

* Marine Electrical Equipment

* Welding

* Machining

* Fluid Mechanics

* Instrumentation, Controls & Automation

* Ship Components, Machinery & systems

* Fluids

Marine Engineering Systems Design Technology May

1999

Marine Institute of Memorial University

St. John's, NF, Canada

* Power, Propulsion and Auxiliary Systems

* Offshore Platforms, Instrumentation, & Controls

* Systems Design

* Thermodynamics

* Piping

Naval Architecture Technology May

1998

Marine Institute of Memorial University

St. John's, NF, Canada

* Shipyard Management

* Structural Ship Design

* Marine Electrical Ship Design

* Hydrostatic Stability & Hydrodynamics

* Strength of Materials

Certificate and Computer Training and Applications

* Fourth Class Engineer, Motor Ship (Licenced)

* Provisional Marine Medical (Certificate).

* Propulsion Plant Simulator Level I (Certificate).

* Survival Craft and Rescue Boats/Fast Rescue Boats (Certificate).

* Basic Safety STCW-95 VI/I (MED A1 + B2 Practical Certificate).

* Oil and Chemical Tanker Familiarization (Certificate).

* MED in advanced Fire Fighting (Certificate).

* Marine Advanced First Aid (Certificate).

* Confined Space Entry (Certificate).

* WHIMIS & MSDS (Certificate)

* Qualified Gas Tester Training (Certificate)

* Fall Protection (Certificate)

* Certificate of Participation Non-Destructive Testing.

* AutoCAD Mechanical Desktop 3.0

* Autoship

* Microsoft Office

* Ship Constructor

* AutoCAD 2012

* Navisworks

* PDMS

References are available upon request.

Contact this candidate