Senior Piping Designer/Checker
Resume:
Joseph Thomas McNutt
Kennesaw, GA, 30144-5252
************@*****.***
Background
** ***** ** ********* ******** and international experience in the oil refinery, pulp and paper, chemical, pharmaceutical, tobacco, photographic film emulsion, fossil fuel steam generation
Areas of Experience :
Refinery Rebuild
Ethanol Piping Design System
Pharmaceutical
Pulp and paper piping systems and equipment layouts
Paper machine, stock preparation, wet end and dry end
Pulp mill washing and screening
Power boilers
Chemical plants
Photographic Film Emulsion
Petrochemical
P & ID walk downs
Nuclear Construction
Pipe Support Design
Syringe and Cannulae Production
Lube Oil and Hydraulic systems
Polymer Injection Systems
FORD, BACON AND DAVIS
West Monroe, Louisiana
March 2016 thru Present
Senior Piping Designer /Field Engineer
Prepared design and layout of process piping, associated supports and related equipment for Surface Condenser Replacement at International Paper Company, Campti, Louisiana. AutoCAD 2015
Prepared design and layout of process piping, associated supports and related equipment for Andritz Two-Stage Washer system replacement at International Paper Company, Valliant, Oklahoma AutoCAD 2015
Prepared design and layout piping, associated supports and related equipment for P.M. 2 Refiners and Screens Replacement at International Paper Company, Valliant, Oklahoma AutoCAD 2015
AMEC FOSTER WHEELER
Tucker, Georgia
November 2013 – January 2016
ROCKWEST, Stevenson, Ala. (7/15–1/16)
Senior Piping Designer, prepared design, demolition and layout of process piping associated supports and equipment for OC1 Dewatering Press Replacement. Area included OC1 Press Area. Developed Tie in list, Demolition Drawings and Support Details. All work performed on AutoCAD 14
ROCKWEST, Hodge, LA. (8/14–7/15)
Senior Piping Designer/Field Engineer, prepared design, demolition and layout of process piping associated supports and equipment for Venturi Scrubber / Separator System Project. Areas included I.D. Fan, North / South Venturi Scrubbers and Separators, Combination Boiler North / South WESP Units, North /South Scrubber recycle Tanks and North / South Recycle Tank Pumps. Developed Line list, Tie in list, Valve list and support details. Provided field support to complete start up. All work performed on AutoCAD 14
Brunswick Cellulose, Brunswick, Georgia (11/13-7/14)
Senior Piping Designer, Prepared design, demolition and layout of process piping associated supports and equipment for No. 5 Machine Convertibility Improvements Project. Areas included Fourdrinier Steam showers, Low and High Vacuum Systems, BTF Headbox and central distributor, 1st Press Section top felt and Fourdrinier Roll showers. Developed line list, tie-in drawings and support details. All work performed on AutoCAD 12.
FORD, BACON AND DAVIS
West Monroe, Louisiana
October 2011 thru November 2013
Senior Piping Designer /Field Engineer –Canti, Louisiana
Prepared design and layout of process piping, associated supports and related equipment for Reverse Osmosis System plant expansion, new Air Compressor Building /Cooling Tower, Secondary/Quaternary Cleaner additions, No.1 and 2 Evaporator Sets Black Liquor Flash Tank and Concentrator upgrades and Lube Oil redesign for Paper Machine No.1 at International Paper Company, Canti, Louisiana. AutoCAD 2009
PARSONS CONSTRUCTION-SAVANNAH RIVER SITE
Aiken, S.C.
July 2010 thru October 2011
Field Engineer/Specialist Salt Waste Processing Facility, Aiken, S.C.
Responsible for the generation of piping/ piping support packages for Salt Waste Processing Facility under the direction of the United States Department of Energy for the processing of nuclear waste. Performed field inspection of installed piping /piping supports Generated and modified QCIR’s, FCN’s while working closely with Quality Control Department. Coordinated all work with construction team while adhering to all ASME B31.1 and ASME B31.3 codes and regulations. All piping/piping supports design checked for accuracy using Smart Plant.
URS-Washington Group
St. Louis, Missouri
Sept. 2008 thru March 2010
Senior Piping Designer /Field Engineer, Conoco Phillips Refinery, Wood River, Ill.
Restart and upgrade of existing Refinery. Upgrades of Main Fractionator area, Wet Gas compressor area, Reactor regeneration area and C3/C4 Splitter area. Responsible for field location of piping tie-ins and supports, demolition, generation of tie-in drawings, bill of material and proper material specifications. Coordinated all work with construction team. while adhering to all ASME B31.1 codes and regulations. All work performed on AutoCAD 2006 and 2008
AMEC
Tucker, Georgia
June 2006 – Sept. 2008
Senior Piping Designer, PROGRESS ENERGY CAROLINAS, Wayne County, North Carolina:
Prepared design and layout of underground and above ground utility piping for CT14 Gas Turbine expansion project. Responsibilities included development of General Arrangements,
Locating tie-ins, Coordination with other disciplines for all underground routing of piping.
Areas included Fuel Gas, Hydrogen, Demineralized, Fuel Oil, Air, Service and Potable water systems. Designed all piping supports as well as line lists and Tie in drawings while adhering to all ASME B31.1 codes and regulations.) All work performed on AutoCAD 2006 and 2008
Senior Piping Designer/Field Engineer, KIMBERLY-CLARK CORP, Corinth, MS:
Technical Specialist/Field Engineer for utility piping for new process addition, Kymene pumps, Resin Bed Cleaning Tank, RO Feed Standpipe, Macerator, Fiber recover Standpipe, Daf drain piping and pipe supports. Designed all piping supports as well as line lists and Tie in drawings while adhering to all ASME B31.1 codes and regulations.) All work performed on AutoCAD 2006
Senior Piping Designer/Field Engineer, KIMBERLY-CLARK CORPORATION, LaGrange, Georgia: Prepared design and layout of process piping associated supports and related equipment for secret process of woven fiber manufacturing. Areas included High Pressure Water, Complete Vacuum and High Pressure Shower piping design for entire machine. Provided field sketches and performed Hydro testing of systems in research and development environment. Responsible for all work packages while adhering to all ASME B31.1 codes and regulations. All work performed on AutoCAD 2006
SOUTHERN COMPANY SERVICES
Georgia Power Atlanta, Georgia
December 2005-June 2006(short term contract)
Senior Piping Designer
Responsible for design of piping and related equipment for SCR systems. Compiled all Material and Valve lists for Purchase. Coordinated with various vendors and supply houses for material purchases. Compiled all material, line and drawing lists. Field verified all information. All work performed on AutoCAD computer systems with AUTOPLANT software.
JOHN CRANE SAFEMATIC
Norcross, Georgia
June 2004-December 2005
Senior Piping Designer /Field Engineer
Responsible for design of turn key lubrication systems for various OEM and pulp and paper systems. Compiled all Material and Valve lists for Purchase. Coordinated with various vendors and supply houses for material purchases. Compiled all material, line and drawing lists. Field
verified all information. Participated in shut downs during construction while adhering to all ASME B31.1 codes and regulations. All work performed on AutoCAD 2000
POLYSIUS CORPORATION
Atlanta, Georgia
January 2004 –June 2004(short term contract)
Senior Piping Designer
Designed complete Slurry System Piping for 50 TPD Limestone grinding system. Compiled all Material and Valve lists for Purchase. Complete hanger design and purchase. Coordinated with pipe fabricators while adhering to all ASME B31.1 codes and regulations. All work performed on AutoCAD 2000.
DELTA T CORPORATION
Williamsburg, Virginia
October 2003-January 2004(short term contract)
Senior Piping Designer /Field Engineer
Designed Ethanol Piping Design System for Plant expansion of Ace Ethanol, located in Stanley, Wisconsin. Responsibilities included field locating; documenting and isometric drawings for 120 tie in locations. Compiled material, line and drawing lists. Coordinated with piping contractor during erection and construction. Developed pipe support drawings while adhering to all ASME B31.1 codes and regulations. All work developed using AutoCAD 2000.
TIC Corporation/ Calpine Energy -
Columbia, South Carolina
July 2003-October 2003(short term contract)
Field Engineer
Responsible for developing onsite High, Intermediate and Low Pressure Hydrotest packages for Nooter/Erickson Boiler Units while adhering to all ASME B31.1 codes and regulations. Coordinated with construction team to develop revised Balance of Plant isometric drawings for the Water treatment, Chemical Feed skids, Ammonia, Demineralized, Condensate and Pipe rack Areas.
HARRIS GROUP, INC..
Atlanta, Georgia
January 2003 -July 2003(short term contract)
Senior Piping Designer /Field Engineer
Prepared detail design and layout of process piping, associated supports and related equipment for recovery boiler black liquor heat system and recovery boiler ash system for Georgia Pacific Monticello, Mississippi. All work performed on AutoCAD 2000.
E.S.I. ENGINEERING (On loan from Sandwell Engineers)
Kennesaw, Georgia
September 2001 –June 2002
Senior Piping Designer
Prepared equipment layouts, orthographic drawings of Main Steam and Condensate piping, stress isos and special supports for a new wood and biomass fired utility power boiler and steam generator turbine station for Cinergy Corp. St. Paul, Mn. All work performed on AutoCAD 2000
AMEC (On loan from Sandwell Engineers)
Decatur, Georgia
June 2000 – June 2001
Senior Piping Designer /Field Engineer-Schweitzer -Maduit Spotswood, New Jersey
Prepared design and layout of process piping, associated supports and related equipment for Secret banded paper project for five cigarette paper manufacturing machines. Areas included Main steam, Condensate return and Slurry Mix injection. Provided field sketches and performed Hydro testing of systems for Schweitzer-Mauduit in Spotswood, New Jersey All work performed on AutoCAD 2000.
SANDWELL ENGINEERING
Atlanta, Georgia
February 1991 – January 2003
Senior Piping Designer /Field Engineer
Prepared detail design and layout of process piping and associated supports for Cluster Rule Compliance for Smurfit Stone Container Corp. Brewton, AL. AutoCAD Release 14
Senior Piping Designer /Field Engineer
Prepared design and layout of process piping, associated supports and related equipment for calcium carbonate wet grinding plant expansion and dry product addition for Alabama Carbonates, Sylacauga, AL. AutoCAD Release 14
Senior Piping Designer
Prepared design and layout of process piping and associated supports for ECF conversion of two hardwood lines and a softwood line for Georgia-Pacific, Ashdown, Ark. AutoCAD Release 14
Senior Piping Designer /Field Engineer
Prepared detail design and layout of process piping and associated supports for pulp mill optimization and associated NCG collection and incineration project for Weyerhaeuser, Valliant, OK.
Senior Piping Designer /Field Engineer
Provide on-site field engineering and design for mist elimination system for Georgia-Pacific Crossett, AR. AutoCAD Rel 13
Senior Piping Designer
Prepared general arrangements for a calcium carbonate plant for OMYA, Inc. Sumatra, Indonesia. AutoCAD Rel 13
Senior Piping Designer
Prepared steam and condensate piping layout and design including hanger design and locations for a grassroots 679-TPD paper machine and peripheral equipment for Temple-Inland Evadale, TX. AutoCAD Rel 11
Senior Piping Designer
Prepared design and layout of shower piping area for mill expansion project, generated tank and storage chest drawings for vendor review and bids, and revised process and design drawings for Virginia Fibre Riverdale, VA.
Senior Piping Designer
Prepared design and layout of bridge piping supports for mill expansion project including causticizer, kiln feed, weak liquor, and acid and rinse tank piping; coordinated with field engineering and vendors; and performed continuity checks according to the P&ID and orthographic drawings to determine status of completion for piping drawings for ITT Rayonier Jessup, GA.
CRSS ENGINEERING
Greenville, SC
October 1987-January 1991
Senior Designer/Field Engineer
Prepared spool design, weld verification and layout of balance of plant piping in containment area at Sheron Harris Nuclear Power Plant for Carolina Power and Light in New Hill, North Carolina
Senior Designer/Field Engineer
Prepared design and layout of pipe supports in bridge area for mill expansion, coordinated with vendor, and provided field support during development and erection for Union Camp in Eastover, SC
Senior Piping Designer
Prepared design and layout of process piping, equipment, and utility headers including USP piping for gelatin-encapsulated or pressed decongestant products, and coordinated with vendors and field support for Lederle Laboratories in Sanford, NC.
Field Engineer-International Assignment
For Sudamtex Fiberglass in Barcelona, Venezuela, field engineer and liaison for mechanical equipment and support disciplines for PPG in Charlotte, NC.
Senior Piping Designer /Field Engineer
Prepared design and layout of bridge piping in pigment area for a 260-TPD titanium
Dioxide production plant, coordinated engineering and construction during tie-in phase, and generated record drawings for Kemira, Inc., in Savannah, GA.
Field Engineer-International Assignment
Prepared design and layout of process piping and equipment and coordinated with equipment vendors and construction personnel during field erection of a syringe and cannulae production facility for Becton Dickinson Medical Products Ptd. Otd. In Singapore
Employment
AMEC Foster Wheeler, Tucker, Georgia
Ford, Bacon and Davis, N. Monroe, Louisiana
Parsons Construction, Aiken, South Carolina
URS Corporation, St. Louis, Missouri
Southern Company, Atlanta, Georgia
John Crane Safematic, Norcross, Georgia
Polysius Corp., Atlanta, Georgia
TIC Construction, Columbia, S.C.
Delta T Corp., Williamsburg, Virginia
Harris Group Inc., Atlanta, Georgia
ESI Engineering, Kennesaw, Georgia
AMEC Engineering, Atlanta, Georgia
Sandwell Engineering, Atlanta, Georgia
CRSS Engineering, Greenville, South Carolina
Amoco Chemical, Charleston, South Carolina
J. E. Sirrine, Greenville, South Carolina
Stone and Webster Engineering, Atlanta, Georgia
Education
AutoCAD Release 9 thru Release 2015 experience …… 1991 thru Present
Mechanical Engineering Technology I, Greenville Technical College 1973 - Certificate
Piping Design Levels I, II, III, & IV, Greenville Technical College 1974 - Certificate
Pipe Stress Analysis I and II Greenville Technical College 1975-76 - Certificate
Microstation Computer Certification, Greenville Technical College 1990 - Certificate Bentley Essential Microstation - Charlotte, N.C. 2004- Certificate
Contact this candidate