qc welding inspector
Resume:
CURRICULUM VITAE
Mansur M Gaha
E-mail:
**********@*****.***
*********@*****.**.**
Contact No (India):
Present Address:
Old Police line,
Bhavnagar-364001
Gujarat, INDIA.
Date of Birth :
11th Oct, 1984
Sex : Male
Marital Status:
Married
Nationality :
Indian
Languages Known :
English, Hindi & Gujarati
Passport No :
G 2937676 CAREER OBJECTIVE
To Work with dynamic and creative organization where I could share my skills and capabilities in challenging position of responsibility that would stimulate and give me an opportunity to work in your esteemed organization.
ACADEMIC PROFILE
B.E. MECHANICAL (2006)
SS College of Engineering, Bhavnagar University.
XII, GSEB (2002)
Vishuddhanand Vinaymandir School, Bhavnagar.
X , GSEB (2000)
Fatima Convent, Bhavnagar.
PROJECTS
• Vocational Training : ULTRATECH CEMENT LTD, KOVAYA
Project : Captive Power Plant
• Vocational Training : ALCOCK ASHDOWN, BHAVNAGAR
Project : Hull Construction
• Seminar Project : WELDING TECHNOLOGY
SPECIALIZATION
• ASNT NDT Level II Certification in UT & RT
• Familiar with IACS, IRS, ASME, AWS D1.1, API 1104 etc.
• Thorough knowledge in Welding, welding types & defects-remedies
• Interpretation of NDTs like RT, UT, MT, PT and WV etc.
• Good knowledge in WPS, PQR,WQT
• Fabrication of Structure, HULL Structure, Pressure vessels etc.
• Qualified as welding engineer in L&T
• Thorough knowledge of Hull construction Inspection & Testing sequences.
• Knowledge of Mechanical testing, QC activities, equipments & gauges.
COMPUTER AWARENESS
• Operating Systems: Windows 98, 2000, XP.
• Languages : C
• Simulator : AutoCAD
• Other Packages : MS Office (CCC in DOAECC)
Hobbies:
- Reading & Surfing
- Knowledge Sharing
- Music & movies
- Cricket & body building
Strengths:
- Hardworking
- Ambitious
- Teamwork
WORK EXPERIENCE
(1) Modest Infrastructure Ltd., Bhavnagar.
Designation : QC-Engineer
Duration : April 2010 to till date
Company Profile : Ship builders & Ship repairers
Projects : 4000 & 2800 DWT Self Unloading Cement Carrier
Owner : Ambuja Cement Ltd.
Notation: SUL IY CEMENT CARRIER SELF UNLOADER for Indian Coastal Service and meeting the requirements of Class X Vessels as per IMS Act GOI.
JOB RESPONSIBILITIES:
-Stage wise ‘Hull structural’ inspections & weld inspection as following…
Prefabrication Stage: Incoming plate inspection, Plate identification & material traceability, Laminar checking, Nesting plan, Marking, WEP, Fit-up, weld visual.
Assembly Stage: Alignment of bulkheads, frames, girders and stiffeners by water level, plumb, spirit level etc. To check missing elements, deformation, buckling & weld defects.
Eraction Stage: Block butt fit-up, Block to block alignment, welding according to welding schedule, scantling & dry survey according to drawing.
General Survey:
-To ensure that the fabricated structure comply with the specified requirements of pertinent drawings, quality standards and customer specifications at various stages of fabrication.
-Carried out inspection like APT, Hydro test, Structural test, Hose testing, Vacuum test etc.
-Inspection of Machinery, Piping systems, Out fittings & Accommodation area according to technical specification of owner & class requirements.
Welding Survey:
-To qualify welding procedure & welders and prepare documents like WPS, PQR, WPQ.
-To verify the lab test reports of the test coupon after Destructive tests & NDT.
-To arrange & interpretation NDTs according to NDT plan & give repair procedure.
-Develop new welding techniques and procedures to enhance the quality & productivity.
Special Survey :
-Keel sighting, Principal dimension & Draft marks verification, Load line verification, Inclining test, Tonnage calculation, LSA, FFA.
-Dock Trials (Function test Pumps, HVAC, CA System, DG Load trial, ME Safety checks).
-Sea Trials (M/E Endurance Trial, Maneuvering Trial, Steering Trial, Anchor Trial).
Documentation:
Prepare & maintain documents like QAP, Internal & Surveyor inspection reports, NDT plan, Tank testing plan, Procedures, NCRs, Mill TC & Class approval material certificates, Consumables certificates, Equipments manual & certificates, Class certification etc.
References :
Mr. G.D.Acharya
HOD of the Feb Dept.
BPTI College,
Bhavanagar.
Mo+91 -982-***-****
*********@**********.***
Mr.Bharat Asalpara
QC Manager,
L & T, Hazira,
Surat.
Mo +91¬-987-***-****
***@***.*******.***
Mr. Ishan Jani
QC Head,
Modest Infra. Ltd.
Bhavnagar,
*****.****@*******.**
(2) Afcons Infrastructure Ltd., Pipavav Shipyard Site.
Designation : Fabrication Engineer (QC Department )
Duration : May 2008 to March 2010
Projects : Goliath Crane (Gentry of 600T ), Caisson Gate
Company Profile : Structural Fabrication & Eraction works
-Piping, Bridges, Jetties, Offshore, Marine projects
JOB RESPONSIBILITIES:
-Stage wise structural fabrication inspection & give preventive or corrective actions.
- Stage wise NDTs and give repair plan for trouble shooting in case of repairs.
-Monitoring production & welding processes according to Code, WPS & Drawing.
-Establishing welding process and maintain quality parameters for sound weld.
-Co-operate with contractors, supervisors & welders for insuring zero defect.
-Planning & storage of consumables, fluxes & other inspection gauges.
-Prepare documents like WPS, PQR and WPQ, Fit-up & weld visual reports.
-Read specifications to determine welding requirements and implement it for better quality.
-Dealing with Client QC, TPI & NDT agency.
-Arranging & witnessing NDTs like RT, UT, MPT, DPT & Heat treatments processes.
(3) L&T Ltd., Under Sagar Construction Co., Surat.
Designation : Welding Engineer
Duration : July 2006 to April 2008
Project : Vacuum column, Debutanizer, Stripper column
Company Profile : Manufacturing of heavy fabricated equipments
-Pressure vessel, Heat exchanger,Regenerator,Reactor
JOB RESPONSIBILITIES :
-To study Drawings, Inspection test plans, Customer’s-specifications & requirements.
-To establish Welding Procedure Specification & conduct Welder Qualification Test.
- Insure that the all requirements of weld, welder and welding activities are correctly specified and carried out in accordance with the relevant code & weld shop plan.
-To prepare documents like WPS, PQR, Daily progress report, welding data book, log books of machine. & analyze the data for process optimization.
-Indent the consumables & Welding M/c required at field.
-To issue daily production targets to shop supervisor as per available work force & priority.
-Coordinate, supervise & direct the duties of all welding teams & fabricators.
-Interaction with QA-QC, Client designer in critical matters, contractors & outside vendors.
I hereby declare that all the particulars mentioned above are true to best of my knowledge & I take full responsibility for the same.
- MANSUR GAHA
Contact this candidate