Power Plant Project

¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬Pablo Diaz

Address Houston Ph. 713-***-****

Loma Escondida 1001 Home 011-52-814-040-6646

Mitras Pte. Secc. Salvatierra Cell 011-52-811-***-****

Garcia, NL mexico 66023 Email *******.****@*****.***

Job Title

Sr. Piping designer

Education

High school

2002-2005 Alvaro Obregon Monterrey, NL Mexico

Tres Caminos, 67190 Nuevo León, Mexico

Languages

Spanish (Native) & English (Fluent)

Training Courses Kellogg Brown & Root de Monterrey Monterrey, N.L. Mexico

PDS

Kellogg Brown & Root Houston, TX USA

Process plant layout by Roger Hunt

Bufete Industrial S.A. de C.V. Veracruz, ver. Mexico

MicroStation V5

A.U.VER. S.A. Veracruz, ver. Mex.

Introducing Piping Design by Grupo Lanzagorta.

Valves by Grupo Lanzagorta.

Career highlights

Extensive experience relating to piping design,, layout, design,field trouble shooting during construction

3D piping designer in Oil, Gas, Water, LNG Terminals, Petrochemical Facilities, , Platforms, Fire Protection in domestic and international projects for U.S., Mexicoand Middle East, (Pulp and Paper, Power nuclear plants and Shipbuilder in Mexico only)

Advanced skills in use of PDMS PDS, Microstation and CADD technologies for the engineering and design positions

Participating in field group on rapid rebuild and deployment of engineering services to catastrophic events due to equipment failure or process disruption

Acting as a PDMS instructor to help the trainees to improve their skills such as operate the PDMS in a faster way, take shortcuts and typing commands.

Design and Drafting skills set

Perform the three dimensional (3D) design using AVEVA Plant Design Management System (PDMS). The 3D model AVEVA 3D basic design information of disciplines, such as equipment, piping, and structure.

Perform the three dimensional (3D) design using Intergraph Plant Design System (PDS). The 3D model integrates 3D basic design information of disciplines, such as equipment, piping, and structure.

MTO take off

Preparation of as-built drawings

Advanced skills in use of PDMS PDS, and Microstation

Preparation of detailed piping route design

Check all detail design drawings before submitting for approval.

Prepare documents for delivery

Piping Orthographic Design and Layout

Field Eng. and Design Trouble Shooting

Piping Isometric production

Piping Drawing Development

Piping Support Development

P&ID Diagram interpretation

Plant and Equipment Layout & Design

P&ID Walk Down Verification

P&ID Demolition Walk Down Verification

Work according Engineering Standards such as ASME, ANSI, DIN

Project Tracking and Progress Reporting to supervisor

Computer skill set

-Microsoft Office 2007 (current)

-Microsoft Office 2003

-Intergraph PDS

-Aveva PDMS (Good skills for MDS application)

-Microstation V5 amd Microstation J

Career Summary

Piping designer

Kellogg Brown Root

(May/2011–Mar/2012)

Office location: Monterrey, NL. Mexico

Job description:

Responsible for the 3D PDMS piping modeling, pipe supports, interference check, and ISO extraction coordination. Working close with Process, Structural, Instrument and Electrical departments during the design of Drilling module, attending to design review sessions, solving model review comments.

Big Foot project

Offshore Rig location: US, Gulf of Mexico

(Client: Chevron)

Technip de Monterrey

(Dec/2010 –up to today )

Job title

Piping designer

Office location: Monterrey, NL Mexico

Job description:

In charge of update modeling of equipment, isometric drawing production in PDS

Refinery SRU Salamanca.

Plant location: Salamanca, Gto. Mexico

COPESA

(Aug//2010 – Sep/2010)

Job title

Piping designer

Office location: Coatzacoalcos, Ver. Mexico

Job description:

Development of storage tanks farm for Clariant refinery in Coatzacoalcos Ver.

This area and some others were dismounted in Cuernavaca, Mor. And will be installed in Coatzacoalcos Ver.

Plant location: Coatzacoalcos, Ver. Mexico

M-TEC M-TEC Macomb Community College

(Jul/2009 – Jul/2009)

College location: Warren, Mi. U.S.A

Job description:

Acted as a 3D PDMS instructor with a class in M-TEC community college, answering questions, helping the trainees to solve trouble shooting, clarify the trainees concerns, improve the performance of the class and increase the velocity of the group

Temporary job in M-TEC Macomb Community College

Warren, Mi U.S.A.

AMEC

(Mar/2009 –Jun/ 2009)

Office location: Houston, TX. U.S.A

Job description:

Responsible for the 3D PDMS piping and equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments during the design of multiple proposals for Produced Water module in Kizomba FSPO in order the client chose and approved the best proposal

Kizomba Satellites project

FPSO location: Angola, Africa

(Client: Exxon-Mobile)

Kellogg Brown Root

(May/2008 –Mar/ 2009)

Office location: Houston, TX. U.S.A

Job description:

Responsible for the 3D PDMS piping and equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments during the design of topsides utilities modules

PazFlor project

FPSO location: Angola, Africa

(Client: Total, DSME)

Kellogg Brown Root

(Mar/2008 – May/2008)

Office location: Houston, TX. U.S.A

Job description:

Responsible for the 3D PDMS fire protection, deluge systems and safety equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments in all topsides modules for Pazflor FPSO

FPSO location: Angola, Africa

(Client: Total, DSME)

Kellogg Brown Root

(Jul/2007 – Mar/2008 )

Office location: Houston, TX. U.S.A

Job description:

Responsible for the 3D PDS piping and equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments during the design of main pipe rack and finger pipe racks in Benzene unit

Saudi Kayan Complex project

Plant location: Al-Jubail Saudi Arabia

(Client: Saudi Kayan Petrochemical Company)

Bechtel Corp.

(Oct/2006 –Jul/ 2007 )

Office location: Houston, Tx. U.S.A

Job description:

Responsible for the 3D PDS piping and equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments during the design of main pipe rack and finger pipe racks in crude unit

Reliance project

Plant location: Jamnagar, India.

Kellogg Brown Root de Monterrey

(Jul/2006 –Oct/2006)

Office location: Houston, TX. U.S.A

Job description:

Responsible for the 3D PDMS fire protection, deluge systems and safety equipment modeling, pipe supports, interference check, and ISO extraction coordination defining of fire areas and scope of work with safety and process safety engineers

SKIKDA project

Plant location: Algeria, Africa

(Client: Gassi Touil)

Kellogg Brown & Root de Monterrey

(Jan/2006 –Jul/ 2006)

Office location: Houston, TX. U.S.A

Job description:

Responsible for the 3D PDMS fire protection, deluge systems and safety equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments in all modules in Tombua Landana offshore rig.

Tombua Landana project

Platform location: Angola, Africa.

(Client: Chevron)

Kellogg Brown & Root de Monterrey

(Jan2005 – Dec/2005)

Office location: Houston, TX. U.S.A

Job description:

Responsible for the 3D PDMS fire protection, deluge systems and safety equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments in all topsides modules for AGBAMI FPSO

AGBAMI project

FPSO location: Nigeria Coast, Africa.

(Client: DSME / Chevron-Texaco)

Kellogg Brown & Root de Monterrey

(Jun/2004 – Jan/2005)

Office location: Monterrey, N.L.

Job description:

Responsible for the 3D PDMS fire protection, deluge systems and safety equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments in all topsides modules for Greater Plutonium FPSO

Greater Plutonium project

FPSO location: Block 18 Angola Coast, Africa.

(Client: BP)

Kellogg Brown & Root de Monterrey

(Oct/2003 –Jun/ 2004)

Office location: Monterrey, N.L.

Job description:

Development of Super Sketch in PDS for Synfuel Catalytic Cracker

Synfuel Catalytic Cracker project

(Client: SASOL)

Kellogg Brown & Root de Monterrey

(Apr/2003 – Oct/2003)

Office location: Houston, Tx.

Job description:

Responsible for the 3D PDS piping and equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments during the design of Ethylene unit

Bayou refinery Project

Plant location: Chocolate Bayou refinery TX.

(Client: BP Amoco)

Kellogg Brown & Root de Monterrey

(Jul/2002 – Mar/2003)

Office location: Monterrey, N.L.

Job description:

Responsible for the 3D PDS piping and equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments in compressors area on planning stage

for SEGAS project

SEGAS project

Plant location: Egypt Africa.

Kellogg Brown & Root de Monterrey

(Jan/2002 –Jun/ 2002)

Office location: Monterrey, N.L.

Job description:

Responsible for the 3D PDS piping and equipment modeling, pipe supports, interference check, and ISO extraction coordination with Process, Structural, Instrument and Electrical departments in compressors area on planning stage

of revamp work for Low Sulfur Mogas project.

Beaumont refinery

Plant location: Beaumont refinery. Beaumont, TX

(Client: EXXONMOBIL)

Kellogg Brown & Root de Monterrey

(Feb/2001 –Dec/ 2001)

Office location: Houston, Tx. U.S.A

Job description:

Manual Drafting of piping isometrics and walk downs on field to rebuilt of K-resin

Plant in Styrene unit

K-resin plant Phillips Chevron chemical complex

Pant location: Pasadena, Tx.

(Client: PHILLIPS CHEVRON)

Kellogg Brown & Root de Monterrey

(Jul/ 2000–Jan/ 2001)

Office location: Monterrey, N.L. Mex.

Job description:

Responsible for the 3D PDS piping and equipment modeling, pipe supports, interference

check, and ISO extraction coordination with Process, Structural, Instrument and Electrical

departments during the design of 1-Hexene unit for Q-Chem complex

Q-Chem project

Plant location: Mesaieed industrial city, state of Qatar

(Client:))

Kellogg Brown & Root de Monterrey

(Feb/2000 –Jul/ 2000 )

Office location: Monterrey, N.L. Mex.

Job description:

Responsible for the 3D PDS piping and equipment modeling, pipe supports, interference

check, and ISO extraction coordination with Process, Structural, Instrument and Electrical

departments during the design of rundown tank farm & storage area

Prairie Rose, Joffre Alberta, Canada

Plant location: Alberta, Canada

(Client: BP AMOCO)

Kellogg Brown & Root de Monterrey

(Feb/1999 –Jan/ 2000)

Office location: Monterrey, N.L. Mex.

Job description:

1999 – 2000 Kellogg Brown & Root de Monterrey Monterrey, N.L. Mex.

Check of Piping Layouts, plot plans, & piping isometrics for Singapore Chemical

Complex

Plant location: Singapore

(Client: EXXON)

1989 – 1999 Bufete Industrial S.A. de C.V. Veracruz, ver. Mex.

Piping designer

Design of piping arrangement plans & piping isometrics in Nuclear Power Plant: Laguna Verde, unit 2 (Client: C.F.E.)

Field trouble shooting during construction of tubogenerator building in Nuclear Power Plant:Laguna Verde, unit 2

(Client: C.F.E.)

As-built in reactor building in Nuclear Power Plant: Laguna Verde, unit 2

(Client: C.F.E.)

Revamp piping arrangements in Petrochemical Plants: Naranjos, Cerro azul, ver. Poza Rica, Ver. & Matapionche, Ver. (Client: PEMEX)

Revamp piping arrangements in “Benito Juarez” Sugar Mill: E. Carranza,

(Client: G.A.M.)

1985 – 1989 A.U.VER. S.A. Veracruz, ver. Mex.

Draftsman / Piping designer

Manual drafting and design of Piping Layouts, plot plans, piping arrangements, manual drafting

of piping isometrics, Field trouble shooting during construction in Motor Vessels (Tankers): Nuevo Pemex I, Nuevo Pemex II, & Nuevo Pemex III

(Client: PEMEX)

Contact this candidate