Sr. MG PCB Designer

RESUME OF: JAMES R. BOATRIGHT CURRENT ACTIVE CLEARANCE: SECRET

Perm Phone: 260-***-****

Cell Phone: 260-***-****

Email address: ********@*******.***

-SOFTWARE EXPERIENCE

-Mentor Graphics Expedition Pinnacle 2005.5

-Veribest, 2002

-AutoCAD and AutoCAD LT 2006

-MG DxDesigner, 2004

-MG Design Capture, 2003

- MG Report Writer

-GerbTool, 15

-CAM350

-Intergraph, 1994

-QUALIFICATIONS:

-14+ Years experience using Veribest and Mentor Graphics Expedition.

-Over 29 years PCB layout experience in a wide variety of industries, High Speed Telecommunications, Automotive, Avionics

- Commercial & Military (Army, Navy, and Air Force)

- High Density, High Speed, BGA’S, Diff Pair Impedance, Matched Length Traces, RF Design Technology

-11 years + (Combo) Designer, Librarian, for MG Expedition, MG Design Capture, Veribest Layout and Schematic, Cells & Symbols creation - smt and thru hole geometries (Foot Prints) per IPC, Military Stds., and using commercial vendor specs when necessary.

EXPERIENCE:

-MASSACHUSETTS INSTUTIE OF TECHNOLOGY, LINCOLN LABORATORIES, Lexington, MA

-Sr. PCB DESIGNER

High-density layout of multi-layer PCB’s with SMT and thru-hole technology being used with primary & secondary sided populated along with the

Use of BGA’s and fine pitch parts. MG EXPEDITION PINNACLE PCB and MG DxDesigner was the primary software tools used with AUTOCAD 2006 as the software tool for Assembly & Fab Drawings. Use of GERBTOOL used for creation of Gerber photoplots. AUTO ACTIVE TECHNOLOGY was used in several board designs for auto routing. Boards were designed for use in high speed military and government applications

-SYMMECTRICOM, Inc. Austin, TX 08-06 to 02-07

-Sr. PCB DESIGNER & LIBRARIAN

High-density layout of multi-layer PCB’s with SMT and thru-hole technology being used with primary & secondary sided populated along with the

Use of BGA’s and fine pitch parts .Boards with RF constraints designed into with special shielding used on telecommunications equipment. MG EXPEDITION PINNACLE PCB 2005.5 and MG DESIGN CAPTURE was the primary software tools used with AUTOCAD 2006 as the software tool for Assembly & Fab Drawings. Use of GERBTOOL used for creation of Gerber photoplots. AUTO ACTIVE TECHNOLOGY was used in several board designs for auto routing. Boards were designed for use in high speed telecommunications network systems. Responsibilities also included ALL LIBRARY Management and creation including all foot print and schematic symbol generation.

-LOCKHEED MARTIN Missiles & Fire Control. Archbald, PA 01/06 to 03/06, 08/03 to 09/03, 09/01 to 11/02

-Sr. MG EXPEDITION SERIES PCB DESIGNER & LIBRARIAN

Design and layout of high-density multi-layer PCB's, using thru hole and SMT technology including the use of BGA’s, with both front and back component mounting. PCB’s designed to be used in naval and air force military applications. PCB's designed to MIL-STD’s , IPC and RF Design

Guidelines. MG EXPEDITION PCB 2004.2 and MG EXPEDITION PCB 2000.5 software was used. AUTO_ACTIVE_ TECHNOLOGY used on several board layout designs. Created Schematics using MG VERIBEST DESIGN CAPTURE. Generated photo plots using CAM350. Also responsible for library management that included new library creation and auditing of symbols, pdb’s, padstack and cells of existing libraries and new libraries.

-NORTHROP GRUMMAN (EOS) Garland, TX 05/05 to 08/05

-Sr. MG EXPEDITION SERIES PCB DESIGNER & LIBRARIAN

Design and layout of high-density multi-layer PCB's, using thru hole and SMT technology including the use of BGA’s, with both front and back component mounting. PCB’s designed to be used in special infrared night vision military applications. PCB's required matched length lines, differential pairing, with crosstalk considerations. PCB's designed to IPC-D-275, IPC-2221, and IPC-2222 Std’s. MG EXPEDITION PCB PINNACLE 2004.1 software was used. Created Schematics using MG VERIBEST DESIGN CAPTURE. Generated photo plots using GERBTOOL. Also responsible for library management that included new library creation and auditing of symbols, pdb’s, padstack and cells of existing libraries.

-CONTINUED RESUME OF JAMES R. BOATRIGHT

-GOODRICH AEROSPACE FUS. Vergennes, VT 06/04 to 04/05

-Sr. MG EXPEDITION SERIES PCB DESIGNER & LIBRARIAN

Design and layout of high-density multi-layer PCB's, using thru hole and SMT technology including the use of BGA’s, with both front and back component mounting. PCB’s designed to be used on European and US aerospace helicopters and aircraft. PCB's designed to IPC-D-275, IPC-2221, and IPC-2222 Std’s. MG EXPEDITION PCB PINNACLE 2004.1 software was used. Created Schematics using MG VERIBEST DESIGN CAPTURE. Generated photo plots using GERBTOOL. Also responsible for library management that included new library creation and auditing of symbols, pdb’s, padstack and cells of existing libraries.

-LANDIS + GYR, INC. Lafayette, IN 09/03 to 11/03

-Sr. MG EXPEDITION SERIES PCB DESIGNER & LIBRARIAN

Design and layout of high-density multi-layer PCB's, use thru hole and SMT technology, with both front and back component mounting. PCB’s designed to be used in residential and commercial use of metering devices. PCB's designed to IPC-D-275, IPC-2221, and IPC-2222 Std’s. MG EXPEDITION PCB PINNACLE 2002.2 software was used. Created Schematics using MG VERIBEST DESIGN CAPTURE. Generated photo plots using GERBTOOL. Also responsible for library management that included new library creation and auditing of symbols, pdb’s, padstack and cells of existing libraries and new libraries.

-CORVIS CORP. Columbia, MD 04/01 to 09/01

-Sr. MG EXPEDITION SERIES PCB DESIGNER & LIBRARIAN

Design and layout of high-density multi-layer PCB's, using thru hole and SMT technology with the use of BGA’s, with front and back component mounting. PCB’s designed to be used in optical networking applications. PCB's required matched length lines, differential pairing, with crosstalk consideration. MG VERIBEST MG2000A EXPEDITION PCB PINNACLE Software was used. AUTO ACTIVE_TECHNOLOGY used on several board layout designs. MG VERIBEST DESIGN CAPTURE used in schematic creation. Generated photo plots using GERBTOOL. Also responsible for library management that included creation and auditing of symbols, pdb’s, padstack and cells.

-MARS ELECTRONICS INTERNATIONAL, Inc. West Chester, PA 08/00 to 04/01

-Sr. MG EXPEDITION SERIES PCB DESIGNER & LIBRARIAN

Design and layout of high-density multi-layer PCB's, using thru hole and SMT technology including the use of BGA’s, with both front and back component mounting. PCB’s designed for monetary validation and identification for both domestic and foreign currency. UL and IPC design requirements meet for domestic designs. MG VERIBEST MG2000A EXPEDITION PCB PINNACLE Software was used. AUTO_ACTIVE_ TECHNOLOGY used on several board layout designs. Created Schematics using MG VERIBEST DESIGN CAPTURE. Generated photo plots using GERBTOOL. Responsible for library management that included symbols, pdb’s, padstack and cell creation. Assembly and Fabrication documentation created on Microstation SE.

-BF GOODRICH AEROSPACE (MCD). Cedar Knolls, NJ 02/00 to 08/00

-Sr. MG VERIBEST EXPEDITION PCB DESIGNER

Design and layout of high-density multi-layer PCB's and Flex Cables, thru hole and SMT, with front and back component mounting. PCB's designed to be used in missile control guidance systems. PCB's required matched length lines, differential pairing, and crosstalk consideration. MG VERIBEST MG2000A EXPEDITION PCB PINNACLE Software was used. Created Schematics using MG VERIBEST DESIGN CAPTURE. Generated photo plots and other artwork with GERBTOOL. Also responsible for library management which included cell and padstack creation. Assembly and Fabrication documentation created on Microstation SE.

- TELLIUM, Inc. Oceanport, NJ 10/99 to 12/99

-Sr. MG VERIBEST EXPEDITION PCB DESIGNER

Design and layout of high-density multi-layer PCB's and Backplanes, thru hole and SMT, with front and back component mounting. PCB's designed to be used in optical networking applications. PCB's required matched length lines, differential pairing, with crosstalk consideration. VERIBEST VB2000 and VB99.0A EXPEDITION PCB PINNACLE Software was used. Also responsible for library management which included cell, pdb, and padstack creation.

-DYNAMIC DETAILS, Inc. Ft. Wayne, IN 09/98 to 08/99

-Sr. VERIBEST & PADS PCB Designer, Consultant

Design and layout of high-density, multi-layer, with SMT Technology type PCB’S for various clients Goodrich Aerospace, TI, Salix Technologies, and Tegal. Work was performed to IPC Standards and clients instructions.

-INTELECT NETWORK TECHNOLOGIES, Inc. Richardson, TX 06/97 to 9/97, 01/98 to 05/98

Sr. VERIBEST PCB Designer

Design and layout of high-density multi-layer boards used in telecommunications Technologies. Work was performed to IPC and clients instructions.VERIBEST PCB, VERIBEST DESIGN CAPTURE, and VERIBEST REPORT WRITER using version VB98.0 and VB98.0A.

-was used also in the library creation of PCB Cells, Schematic Symbols and PDB files. Used CAM350 for generation of photo plots.

Contact this candidate