Project Mechanical Engineer
Resume:
Agena, Allan Manalo
CSWIP *.* Welding Inspector / Mechanical Engineer
Contact No. +639********* / +639*********
E-Mail Add. *************@*****.***
*** *** *****, *****, ********, Philippines
Position applied for:
QA/QC Mechanical Welding/Piping Inspector
Onshore and Offshore
Welding Inspection and Professional Qualification:
CSWIP 3.1 Welding Inspector
Certification No.: 35534
Expiry Date: 10 February 2013
Registered Mechanical Engineer
Professional Regulation Commission
Registration No.: 0068463
May 18, 2007
NDT Trainings and Qualifications:
Radiographic Testing Level II
Philippine Nuclear Research Institute
April 19 - 30, 2010
Penetrant Testing Level II
Philippine Nuclear Research Institute
July 19 - 23, 2010
Magnetic Particle Testing Level II
Philippine Nuclear Research Institute
March 07 – 11, 2011
Ultrasonic Testing Level II
Philippine Nuclear Research Institute
May 09 – 20, 2011
Offshore Required Training Attended:
Basic Offshore Safety Induction and Emergency Training (BOSIET)
Consolidated Training System Incorporated
April 27-29, 2009
Basic Safety Training
Far East Maritime Foundation Incorporated
February 06-14, 2009
Educational Background:
Bachelor of Science in Mechanical Engineering
Golden Gate Colleges
Batangas State University
Batangas City
S. Y. 2001 – 2006
Summary of Experiences:
With almost five (5) years of experiences in Constructions, Fabrications, Installations, Inspections, Quality Assurance and Quality Control. Knowledge in Quality Control Procedure, Inspection and Test Plan and Engineering Practices.
Career Objectives:
To get a chance to work in a dynamic organization where my education, experiences, strong aptitude for learning, presentation and analytical problem solving, technical skills and ability would be utilized and I shall have an opportunity to improve on it. Work in a professional attitude to attain a quality output.
Codes Familiarity:
Knowledge in ASME IX, ASME B31.3, AWS D1.1, API 1104 and DNV-OS-F101.
Work Experiences:
Position: QA/QC Welding/Piping Inspector
Company: Saipem Eni
Project: USAN Deepwater Development Project
Client: TOTAL
Location: Nigeria
Date: November 2010 – May 2011
Company: Foster Wheeler USA Corporation
Project: BP Whiting Refinery Modernization Project
Client: British Petroleum BP
Location: AG@P Batangas Heavy Fabrication Yard, Philippines
Date: July 2010 – October 2010
Company: Saipem Eni
Project: GEP 17 Project TOTAL E&P
Client: TOTAL
Location: Atlantic Ocean, Angola
Project: Urugua Project
Client: PETROBRAS
Location: Atlantic Ocean, Brazil
Project: Sequoia Joint Development Project
Client: Burullus Gas Company
Location: Mediterranean Sea, Egypt
Date: May 2009 – June 2010
Company: Consolidated Contractors Company CCC
Project: Rabigh Olefin Plants Project
Client: Sumitomo / PETRO Rabigh
Location: Rabigh, Saudi Arabia
Date: July 2007 – October 2008
Company: EEI Corporation
Project: Fabrication Yard
Location: EEI Fabrication Batangas, Philippines
Date: April 2006 – July 2007
Position: Assistant QA/QC Welding Piping Inspector
Purpose: Student on the Job Training
Company: EEI Corporation
Location: EEI Fabrication Batangas, Philippines
Date: September 2005 – April 2006
Duties and Responsibilities:
Review all applicable codes, project specifications, engineering standards, Quality Control Procedure, Inspection and Test Plan and applied during inspection as the productions are in progress.
Monitor and perform Welders Qualification Test prior to qualified welders before the productions start.
Monitoring welding is done as per the Welding Procedure Specifications.
Monitoring of welding materials and consumables such as proper handling and daily inspection of consumable storage if it is at proper conditions.
Witness and perform Non Destructive Testing such Radiograph, Magnetic and Penetrant Testing.
Review test package to ensure that all require documents are properly and completely attach and the required data is correctly encoded.
Monitor welding is done in controlled manner to avoid distortion and welding conditions are controlled.
Inspect checks and identifies piping materials that are being fabricated and properly installed to determine their conformity to the requirements as per drawings and material specifications.
Conduct field inspection works on regular basis such as fit-up inspection, dimensional check, pre heat, inter pass temperature and visual inspection.
Maintain WPS, PQR, WQTR, Continuity record, Welder List and other welding record.
Provide technical assistance to the welding team to ensure full quality control of welding operations.
Identifying non-conformance of the contractors design to project specification requirements pertaining to QA/QC Mechanical /Piping aspects of the project.
Make discrepancy and surveillance report if there is a deviation on the procedure and standards mostly on damage materials for fabrication and installation during the work progress.
Inspect checks and identifies piping materials that are being fabricated and properly installed to determine their conformity to the requirements of the isometric drawings and material specifications.
Perform line checking for preparation for testing and review isometric drawings to check if all items were been installed properly as per drawing requirements and specifications.
Witness pressure testing pneumatic testing, service testing, vacuum testing and hydro testing prior for client acceptance if all line included was made according to standards.
Perform punch list clearing prior for testing and clear all punch items during reinstatement.
Build and maintain all inspection reports and testing reports and have appropriate turnover documentation binders for each phase of the project, which include all mechanical and piping test results.
Check if the working area is safe to start the work and production must go on without any lost time injury to insure the safety of all the personnel and give safety suggestion every time that I found any unsafe act and any unsafe thing at the working place for modification to avoid any accidents.
Training and Seminars Attended:
Certification Scheme for Welding and Inspection Personnel
CSWIP 3.1 Course
January 26-30, 2008
TWI Representative: Steve Cave
CCC ROPP Camp, Rabigh, Kingdom of Saudi Arabia
Basic Offshore Safety Induction and Emergency Training (BOSIET)
Consolidated Training System Incorporated
April 27-29, 2009
Basic Safety Training
Far East Maritime Foundation Incorporated
February 06-14, 2009
Design of Piping Network and HVAC Design
PME. Edgardo Florendo
Golden Gate Colleges
July 29, 2006
Basic Occupational Safety and Health Course
Bureau of Working Conditions
Department of Labor and Employment
December 26-30, 2005
Gas Turbine Power Plant Seminar
Career Development and Technological Center
February 05, 2005
Equipping One Self for Employment
Cocochem Agro Industrial Park
Bauan, Batangas
February 05, 2005
Personal Information’s:
Birth Date: February 07, 1984
Home Address: 183 San Pedro, Bauan, Batangas, Philippines
Passport No.: XX2635791
Seaman Book No.: B0681051
Marital Status: Married
Nationality: Filipino
Religion: Roman Catholic
Height: 5’ 8”
Weight: 175 lbs
I hereby certify that the above information’s are true and correct based on my experienced and knowledge.
Allan Manalo Agena
Contact this candidate