Project Engineer
Resume:
Ganesh Manohar Shete
Address:
***, ******* ***** ****** ********, Near Kohinoor technical institute, Pune:-411004
Email: *********@**********.***
Mob.: 992-***-****
DoB: 10/07/1984
OBJECTIVE:
To become a part of challenging environment in Engineering Services, CAE development that encourages continuous learning, creativity and team building skills.
EXPERIENCE SUMMARY:
• Total work experience of 5.0 years in CAE CRASH
• CAE experience using LS DYNA, PRIMER, ANSA, HYPERMESH
• Working as a CAE Analyst in TATA TECHNOLOGIES, Pune from November 2010 to till date on various Full Vehicle crash for JAGUAR AND LAND ROVER and automotive seating crash projects.
• Worked as a Senior project engineer in FAURECIA TECHNOLOGY CENTRE INDIA, Pune from January 2008 to Oct 2010
• Worked in Silicon meadows. Pune as CAE Trainee engineer.
SKILLS
• CAE Tools- LS DYNA 971,PRIMER,HYPERMESH 10,ANSA 13
Other- MS Office, Windows XP, Linux
EDUCATION:
• Bachelor of Engineering, Mechanical Engineering (BE) June- 2007
G.S. Moze college of Engineering, Pune
Pune University
Percentage– 64%
• Diploma in Mechanical Engineering (DME) May-2002
Bharati Vidhyapeeth , Pune
MSBTE
Percentage– 71%
WORK EXPERIENCE:
Simulations accomplished in LS Dyna:
Project Evaluating the performance of the Vehicle for Rear Impact Crash test (HIGH SPEED).
Customer Jaguar and Land Rover (JLR)
Description Working on Rigid flat faced moving barrier (1814 KG) with full overlap crash test.
Checking for fuel system integrity as per Jaguar and Land rover standards.
Task include: - Update rear subsystems as per design change in full vehicle model. Prepare load case set up as per standard.
Post-process the results.
Done full Vehicle modeling independently include connections in Prmer.
Role Team Member
Tools LS-Dyna 971, Primer,ANSA, Hypermesh LS-Post
Project Evaluating the performance of the Vehicle for Rear Impact Crash test (HIGH SPEED).
Customer Jaguar and Land Rover (JLR)
Description Working on Moving Deformable barrier (1368 KG) with 70% offset to LH and RH crash test.
Checking for Fuel System integrity with Door Aperture as per Jaguar and Land rover standards.
Task include: - Update rear subsystems as per design change in full vehicle model. Prepare load case set up as per standard.
Post-process the results. Report the results.
Done full Vehicle modeling independently include connections in Prmer.
Role Team Member
Tools LS-Dyna 971, Primer,ANSA, Hypermesh LS-Post
Project Evaluating the performance of the Vehicle for Thatcham test (LOW SPEED).
Customer Jaguar and Land Rover (JLR)
Description Working on Thatcham test.
Checking for Structural integrity of rear bumper, Longitudinal rails, and casting.
Task include: - Update rear subsystems as per design and vehicle requirement change in full vehicle model. Prepare load case set up as per standard.
Post-process the results. Report the results.
Done full Vehicle modeling independently include connections in Prmer.
Role Team Member
Tools LS-Dyna 971, Primer,ANSA, Hypermesh LS-Post
Project Evaluating the performance of the Vehicle for Fixed rigid wall test (LOW SPEED).
Customer Jaguar and Land Rover (JLR)
Description Working on Fixed Rigid wall test.
Checking for Structural integrity of Tail gate and Rear bumper.
Task include: - Update rear subsystems as per design and vehicle requirement change in full vehicle model. Prepare load case set up as per standard.
Post-process the results. Report the results.
Done full Vehicle modeling independently include connections in Prmer.
Role Team Member
Tools LS-Dyna 971, Primer, ANSA, Hypermesh, LS-Post
Project Evaluating the performance of the seat for ECER 14, Seat Belt Anchorage (SBA).
Customer Jaguar (Tata Motors European Technical Centre)
Description Done full Vehicle modeling independently include connections in Prmer.
Setup the seat belt anchorage BIW, floor and body blocks. Do the baseline and design iterations. Post-process the results for SBA. Report the results.
Role Team Member
Tools LS-Dyna 971, Primer, ANSA, Hypermesh, LS-Post
Project Evaluating the performance of Second row seat as per ECE R 17 (Luggage Retention).
Customer Jaguar (Tata Motors European Technical Centre)
Description Build the FE model of Second row seat, build FE set up for baseline and design iterations. Post-process the results for Luggage Retention. Deliver the results.
Role Team Member
Tools LS-Dyna 971, Primer, ANSA, Hypermesh, LS-Post
Project Evaluate the performance of the BIW model for FMVSS 225: Child Restrain System.
Customer Jaguar (Tata Motors European Technical Centre)
Description Setup the Second row seat Model using the BIW and Static Force Application Device, (SFAD). Base model debug, update the model representing the test vehicle, solution through solver. Post-process the results for Child Restrain system. Report the result.
Role Team Member
Tools LS-Dyna 971, Primer,ANSA, Hypermesh, LS-Post
Project Evaluate the performance of the Blow molded Seat back model as per ECE R 17 (Luggage Retention).
Customer Faurecia
Description Build the FE model of Second row seat, build FE set up for baseline and design iterations. Post-process the results for Luggage Retention. Deliver the results.
Role Team Member
Tools HYPERMESH 9.0, LS-Dyna 970, LS-Post
Projects Headrest Subsystem strength
Customer Faurecia
Description Carried out Simulation for subsystem of head rest for blow molded rear seat.
Meshing, assembly, connection of heat rest subsystem.
Post processing of Head rest Subsystem
Role Team Member
Tools LS-Dyna 970, Hypermesh, LS-Post
Projects Armrest subsystem (Inovation project)
Customer Faurecia
Description Carried out Simulation for subsystem of head rest for Arm rest subsystem.
Meshing, assembly, connection of heat rest subsystem.
Post processing of Head rest Subsystem
Role Team Member
Tools LS-Dyna 970, Hypermesh, LS-Post
Projects Cusion Length Adjustment (inovation Project)
Customer Faurecia
Description Woking for meshing activty for Cusion Length adjustment for seating system.
Performed Assembly Activity.
Debug run for error free file.
Role Team Member
Tools LS-Dyna 970, Hypermesh, Ansa
Projects VW Second row Seat
Customer Faurecia (VW)
Description Woked for meshing activty of VW Second row seat as per standard.
Performed Assembly Activity.
Debug run for error free file.
Role Team Member
Tools LS-Dyna 970, Hypermesh, Ansa
Projects Instrument Panel, Door Trim, Console System, Cross Car Beam (CCB)
Customer Ford, PSA, GM
Description Worked for meshing activity of above interior systems as per Faurecia standard
Performed Assembly Activity.
Debug run for error free file.
Role Team Member
Tools Ansa, Hypermesh
Projects Deck Conversion from PAMCRASH to RADIOSS.
Customer Ford
Description Carried out conversion process from pamcrash to Radioss for Instrument Panel,Door Trim.
Role Team Member
Tools Ansa, Hypermesh, Textpad
Work Experience after Diploma (DME):
Company Patni computers
Designation DIPLOMA TRAINEE ENGINEER
Description Worked for GIS system on AUTOCAD R14
Role Team Member
Tools Autocad
Company Tata Motors
Designation QUALITY INSPECTOR
Description Worked for Pre delivery Inspection for 207 DI, SUMO Vehicle.
Role Team Member
REFERENCES:
References available upon request
Contact this candidate