Sub: Application for the Post of Engineering Manager for power transmission Line , PLS CADD Line design ,Support structures , steel towers, steel poles for OHTL , distribution lines , telecom structures ( tower & poles ) & Sub station structures related projects.

Dear Sir,

I am looking the subject position in your office .

In case you are willing ,I will be interested in the above position in the reputed organization like yours , surely which is in line with my experience.

I am ready to work anywhere on international level . My detailed resume is attached with this application you will find a worthy candidate in me, but I always believe a worthy team can produce good results in long term, hence I believe in building a team with layers of experience.

I have 20 years experience in this field , have worked in reputed organizations like ABB/SAE , RPG, TRANSMISSION LTD , HIDADA Ltd, & MOTTMAC ltd dealing with 33 KV to 800 KV overhead lines.

I have completed my MASTER DEGREE IN (CIVIL ENGINEERING ) from a reputed University. I would like to get this opportunity to work in the dynamic organization such as the subject..

I hope , the subject organization , will provide an opportunity to prove my worth .

In case our communication moves in positive direction , we can come together to concentrate

on final agreement.

I shall willingly supply any other information if required in this regard.

Hoping to hear favorably .

Best Regards

Er Shahid khan

Myself :- SHAHID KHAN

BACHELOR OF CIVIL ENGINEERING

MASTER OF CIVIL ENGINEERING E-MAIL : mskhan25@ yahoo.com

:

Father’s Name : Mr. A.W. Khan

Date Of Birth : 1st May 1963

Address : M. SHAHID KHAN

: A-6 CHINAR PALACE KOHEFIZA

: BHOPAL (MP) INDIA .

: MOB:-00966 -531896814

Nationality : Indian

Experience : 20 Years

EDUCATIONAL QUALIFICATION

Master of Engineering in Civil Engineering with specialization in Environmental Engineering from Rani Durgavati University, Jabalpur in 1988 with 74.5% marks.

Graduated in Civil Engineering from Devi Ahillya University, Indore in 1985 with 66.7 % Marks.

Passed Higher secondary school examination from Board of secondary Education (M.P) in 1980 with 81.25 % marks.

WORK EXPERIENCE

1-SAE (NDIA) Ltd. NEW Delhi

Since 1988 to 1997, I worked with SAE, (INDIA) Ltd. New Delhi, an RPG group of company Engaged in Design, Fabrication & Erection of Transmission Line, Microwave Tower & Substation Structures as Sr. Executive Engineer in the Design Department. Job Profile includes:

a)Design of Towers ( Both vertical & Horizontal Configuration ) from 33 KV to 800 KV Manually as well as with the help of In House Developed Software based on six degrees of freedom Stiffness Matrix in Fortran Language.

b)Special Structures of Railway crossing, River crossing.

c)Foundation design, Tower spotting, Sag template curve preparation.

d)Proto inspection & Tower testing.

e)Coordinating with Project Department.

During this period I handled following projects Successfully.

f)Bhira-Dharavi 220KV D/C& M/C Line, Work of TATA at Bombay.

g)400KV D/C Vindhayachal- Jabalpur Line of Power Grid Co. India Ltd.

h)33KV D/C Manipur Project.

i)220KV D/C Line of Electricity Generating Authority of Thailand.

j)I also have completed many pre-bid projects successfully.

j)I have designed foundations for all types of towers for different soil parameters.

2- EXPOSURE TO DIFFERENT SOFTWARES

(a) I was using an In house developed software named 6D computer design package for tower design. The above 6D CAD package was developed on DIGITAL’S VAX/VMS operating system platform. This software was specially developed for the design of four-legged self-supporting transmission line towers. This package was based on THREE-DIMENSIONAL INDETERMINATE STIFFNESS ANALYSIS.

(b) I was using software based on finite elements for design of foundations On VAX –

VMS operating system.

(c) I was using software WORD STAR V-6 for preparing our technical documents On

PC DOS-6 Operating system.

(d) I have used LOTUS 123 for all arithmetic calculation on PC DOS-6 operating system

2- HIDADA Ltd. ( 1997-2007)

Since 1997 to 2007 , I worked with HIDADA Ltd. At JEDDAH a company Engaged in Design, Fabrication & Erection of Transmission Line , Microwave Tower, steel poles & Sub station Structures as Sr . Design Engineer in the Design Department Job Profile includes:

a) I also worked as acting engineering manager for 1.5 years , during that period five design engineers & ten drafts man were reporting to me and I coordinated with other deptt also successfully.

aa)Design of Towers (Both vertical Horizontal Configuration ) from 33KV to 380 KV.

b)Design of Telecom Towers & steel poles .

bb)Special structure of River crossing.

c)Tower spotting.

d)Proto Inspection & Tower Testing.

e)Coordinating with Propjet Execution department.

Tower & pole project completed in Hidada ( PLS-CADD ,TOWER/S-POLE V 10.14 )

I handled following Projects in Hidada Successfully

a)380 KV WADI-JALIL project. In this project IEC 826 was followed. In this project all the eight towers designed by me . I co-ordinated with the client & consultant to get the design approval . All the detailing work performed under my supervision , towers were proto assembled and out of which seven towers has been successfully tested. For this project I have designed one 380kv d/c 90m height special crossing tower, which have been erected in MAKKAH. The complete project was handled by me, I also visited construction site many times & handled site problem successfully.

b)110 KV WADI-JALIL project. In this project all the three towers designed by me, got approved ,proto assembled & all towers have been successfully tested. All the three towers have been tested successfully at BABTAIN TESTING BED IN RIYADH .

During the execution of the above project excellent relation ship with the client were maintained.

C) 380 KV SHOAIBA PHASE-I project. In this project specification of SEC-WOA specification was followed which involves the factor of safety unlike IEC 826 . In this project five towers were designed , complete connection details were prepared checked. I designed all the five tower & all have been approved. The suspension tower and all angle tower have been tested successfully. I have also designed two 380 kv

substation gantries and one 120m special tower which is one of the highest 380 kv

tower in KSA. The above tower have been erected in shoaiba

We coordinated with clients & all site problems ,handled successfully.

D) 380 KV d/c MAKKAH –TAIF project. In this project seven towers were required to be designed.

I designed all seven towers & all have been approved. The suspension tower

and all angle towers have been tested successfully at LECCO testing station.. I have also designed one 380 kv 130 m special tower ( one of the highest tower of KSA) which is crossing OH another 380 kv D/C line. In this project two substation gantries of 380 D/C & 110 KV D/C have been designed And executed. During the execution we faced shortage of electrical clearance, which we solved very successfully.

E) 132 KV d/c YANBO-NORTH project. In this project THREE towers were required to be designed. I have designed TWO tower & all have been approved. The suspension tower

and one angle tower have been tested successfully at RIYADH testing bed .

F)220 KV Gazlan project.

G)220 KV D/C Azizya Project. This was a supply project. I was only coordinator.

H)Dealt with 380 KV Yanbu – Madina (EWR)

I) I have designed 33kv KV ARAR LINE for EC. These tower have been tested

successfully tested at Babtain test bed.

J) I worked on 110 kv moya project . There are four towers out of which two tower have been tested successfully at ABB TESTING BED in ITALI AT LECCO testing bad.

K)I have handled many tenders of international level successfully for countries like UAE, DUBAI ,KUWAIT ETHOPIA , PAKISTAN, INDONESEA ,KOSOVO, NIGIREA ,TUNISEA, JORDAN ,LYBEA SUDAN ETC from 33kv to 400 kv OVER HEAD LINES.

L) Reinforcement of 132 kv KALWA-DUGGA existing LINE with NCC Successfully.

M) Recently we have completed 500 kv D/C GAZI-BAROTHA power project for PAKISTAN. There were three towers which have been tested successfully at ABB TESTING BED in ITALI AT LECCO

O) During these periods ,i have handled many pole distribution project from 440 V to 33kv . The structure supporting the above loads is used of octagonal or dodecagonal galvanized steel poles. We have designed & tested poles for many KVS like 440 volts, 11kv, 33kv,66kv & 132 kv double circuit & single circuit lines. In parallel we are doing lighting poles also. We are developing designs, detailing the structures with complete accessories , assembling the structure prototype ,test it and manufacture in mass.

P) I have handled many designed of telecom towers like 135m high Radar tower 40M, 60M & 90M TOWERS FOR OMAN TAWOOS by using loading & design code EIA/TIA-222-F.

3- Mott Mac Ltd. UK Brighton ( 2007 – 2009 )

Work on following projects

a) 400 KV Indian queen line with national grid :- Walk over survey

and report physical status of structure, accessories and and hard wares.

b) 400 KV Coventary line with national grid :- Walk over survey

and report physical status of structure, accessories and and hard wares

c) 220 KV Tennet project refurbishment of structures , we prepared 30 model of towers and reinforced them for new loading by using PLS-CADD line design program.

4- SEC Saudi Electricity company Damam ( 2009 March – Continue )

Currently I am working in SEC dammam office as specialist engineer for design review of 380 KV OHTL related work and civil work of the sub station.

I am reviewing all civil design submittal of 380/115 KV Manifa BSP substation like soil report ,

Pier type foundation design , sub station building , cable ducts , cable tunnel , basement etc.

At the same time , I am reviewing 380 KV D/C OHTL for Maadin , 380 KV d/c OHTL Manifa.

380 KV OHTL from Qurayya to Jubail .

I am also preparing scope of work and project technical specification fro the projects and OHTL.

Sub- Station structures. ( PLS-CADD,TOWER/S-POLE V 8.23 )

I have designed , checked detailing & was involved in proto assembly

Of following sub station structures.

1) Double circuit Gantries for 33 KV & 34.5 KV S/S.

2) Double circuit Gantries for 380 KV & 110 KV S/S.

3) Four circuit Gantries for 380 KV S/S.

4) L - Type Gantry for 132 KV S/S.

5) Portal type support for Trans former .

6) Portal type support for Surge Arrester.

Transmission Line Design. ( PLS-CADD V 10.14)

I have skills to develop terrain modeling , feature codes , line alignment , TIN model and triangulation brake lines, in put of complete design criteria , method 1 , method 2 , method 4 structures. I have further developed , structure spotting , sectioning ,stringing and sagging

of the above line , sag tension calculation , loads calculation , structural, design different types of clearance report and summary and structural design and modification ,Thermal ratings , galloping and PLS-CADD LITE.

AWARENESS & EXPERIENCE WITH DIFFERENT CODES

I am using following codes and manuals for different designs on regular basis and I have

Good experience , understanding of the same.

1) ASCE-52 , ASCE 10 , Design Manual for latticed steel transmission structures by American society of Civil engineer

2) ASCE-72 , Design Manual for steel transmission poles by American society of Civil engineer

3) ASCE-74, Manual for loads for overhead transmission lines by American society of Civil engineer

4) DIN VDE 210 loads for overhead transmission lines.

5) EIA/TIA 1996 Loads & design for telecom structures.

6) IES 826 & IES 650 Loads & testing of overhead transmission line structures

7) IS 802, BS 8100 , DEWA , ADWEA spcn & codes for overhead transmission line structures

codes & specification for Saudi electricity company .

8) Material specifications by ASTM standard, DIN standard, JIS standards, IS, BS & BSEN Euro.

9) Euro code EN50341. and EN 50341-3-15.

DIFFERENT SOFTWARES

a) I am using a latest software named Tower , is MS-WINDOWS programs developed by POWER LINE SYSTEMS for the analysis and design of transmission and communication structures. TOWER has option to check designs according to the ASCE and EIA standards. TOWER has the ability to analyze a structure linearly or non-linearly. TOWER can be used as a line design programs in conjunction with PLS_CADD to produce minimum cost & optimum spotting.

b) I am using SAG10-V3 for all sag-tension calculations. The above software is

prepared by ALCOA. has many options to be used for calculation of sag & tensions

stringing chart , over-tensioning of conductor. Sag-ten calculation for un equal

support. Sag-tension calculation with creep & without creep.

c)I am well aware of the all latest VERSIONS of TOWER.

d)“SPOLE” We are using for the design of different types of pole. Latest SPOLE is also MS_ WINDOWS programs developed by POWER LINE SYSTEM for the analysis and design of transmission and distribution poles. SPOL checks stresses at different points for transmission and guyed poles and compares with allowable values as per ASCE –1990.

e)I am using software WINDOWS for pre-paring our technical documents on MICROSOFT WINDOWS operating system.

f)I have used EXCEL-2000for all arithmetic’s calculations on PC WINDOWS operating system.

SITE EXPERIENCE & DEALING WITH CLIENT

I am routinely handling site problems . I am well aware of site tower erection , proto assembly of tower and fitting problems , stringing & foundation laying procedures. . I have lot of experience of site inspection & dealing with site problems. Whenever Site problem is there like conductor orientation , electrical clearance, circuit orientation ,member fouling Or any other problem I am ready to move with the consultt, contractor. I am dealing with client & contractor on regular basis. I feel great satisfaction By solving the problem of customer . To work in the interest of the project is My motto. I believe , if project is successfully completed within time, the fabricator contractor & client all will be in win -win situation, That will provide us long term association with the customer.

One and half year , I worked as an acting engineering manager in Hidada.

The five design engineer & ten drafts man were reporting to me & five OHTL

Projects were running at a time . I was taking care work schedule , tower testing meetings with customer & site problems .

KINDLY NOTE THAT I HAVE WORKED WITH ALL REPUTED CO. OF KSA , LIKE

SCECO(W), SCECO(S),EC, SCECO(C), BABTAIN,ZAMIL,NPCC,ASAS,SSEM

SAUDCONSULT ( JEDDAH), AL-JAZEERA CONSULTT ( JEDDAH), NCC,AL-SHARIEF,HADI HAIDER,SST,MASS PROJECTS, SAUDI CABLE CO.,ZEDAN CONSULTT, OCTEE, AL-OJEMI,GULF POTENTIAL AND THEIR LEADING ENGINERS KNOW ME VERY WELL. SPECIALLY FOLLOWING PERSONS.

1) Dr D.M. LAKHA PATI ( Sr GM KEC INTERNATIONAL INDIA )

2) Er P. BHATTACHARYA ( GM TATA POWER INDIA )

3) Er AD. ZANELLA ( DGM ENGG ABB -SAE/MILAN OFFICE )

4) Er ABUD ZAINY ( Sr PROJECT MANAGER SAUDI ELECTRIC CO

WESTERN REGION KSA )

5) Er TARIQ MAQSOOD ( MANAGER DESIGN REVIEW SAUD CONSULT

JEDDAH KSA )

All the above information submitted by me are true and facts. I owe the responsibility of above information.

Yours sincerely

Er. SHAHID.KHAN

Contact this candidate