Project Engineer

Curriculum vitae

Mohammed Nizamuddin

Mobile: 009**********

Email: ************@*****.***

Career Goal: To obtain a position as Sr. Safety Engineer that utilizes my skills and knowledge for the betterment of society.

YEARS OF EXPERIENCE:

14+ Years of experience in Environment, Health and Safety related fields in the construction and plant industry Oil & Gases

Engineering experience:

• Process Hazard Analyses (PHAs)

• Safety Integrity Level (SIL) Selection Analyses

• Layer of Protection Analyses (LOPAs)

• Failure Modes and Effects Analyses (FMEAs)

• Process safety management (PSM) program development

• Compliance auditing

• Process safety information development

• Focused Facility Inspections (F.F.I)

• Project management

• Process design

• Relief valve sizing

• Flare header capacity evaluations

• Process control evaluations

• Operating procedures documentation and reviews

• Safety system reviews

• PHA training • Process safety management training

Safety Exposure:

As a matter of fact I would like to clarify about the type of jobs:

Though I was an operations personnel, for 14 years in oil & gas field; 8-9 years of my involvement was in safety field.

• Updating Safety Manuals and MSDS for complex.

• Engaged in DuPont Safety culture programs at site level.

• Process safety and Risk management activities at plants.

• HSEF Composite Daily, Weekly, Monthly(Onsite & Off-the-job).

• Co-ordination for safety activities during Start-up and Shutdown in Plants.

• Maintaining HSEF Incidents statistics and register on daily, weekly, quarterly, and monthly, half yearly and Yearly basis with Injury, Fire, Leak, spill etc. analysis.

• Conducting Various Safety Audits / Observations in plants Incident Investigation for root causes and publishing safety flash at complex level.

• To assist in the investigation of accidents and incidents to determine the underlying causes of accidents/injuries.

• To evaluate/monitor site working conditions related to the construction works.

• To conduct/attend regular meetings with project and contractor representatives to discuss and agree on safety standards, concerns and potential hazards.

• To be proactive in promoting safety awareness at all levels within the project team and contractor personnel.

• To ensure that risk assessment is performed before each potentially dangerous activity.

• To participate in or organize job safety analyses (JSAs) with contractors and request new JSAs if necessary.

• To perform regular safety compliance inspections and audits of contractors to ensure implementation of safe working procedures and best practices.

• To conduct or participate in safety training of project and contractor personnel as required.

• Maintaining Statutory Records of the safety dept.

Duties and Responsibilities carried out:

Supervise work activities. Carries out regular safety inspection and incident/accident prevention visits. Ensures adherence of permit to work (PTW) and other safe work practices in his assigned area.

Submit daily safety report. Report and investigate all incident/accident, unsafe acts/conditions or near misses occurring in his area.

Inspects plants/equipment’s, scaffolding, work at height, PPE, tools & equipment, fire blanket enclosures, site preparation for work, lifting equipment and conducts gas test.

Carry out safety inspections of Contractors and sub-contractors facilities such as workshops and stores and the like.

• Performs various task assigned by commissioning superintendent after daily

meeting.

• Maintain, Monitors and report any abnormalities found in the plant operation activity

• Ensures that shift logs and records must be reviewed and report all abnormal

condition to the incoming shift.

•Takes part in Operations line-walking and handover process, weekly walk through.

• Working Exposure on EMS (ISO14001) & QMS (ISO 9001, DNV safety system.

•Handled various emergencies like Compressor Trips, Pump Failure, Heavy

Hydrocarbon leakages and Utilities failure as a part of safety of plant and

personal.

• Safety and quality consciousness culture development among new employee

DORSCH QATAR Project Name: Lusail Development Project Client: Qatar Dair

Al Muhaidib co.c SAUDI ARAMCO Project Name: KAUST UTILITIES & THUWAL DEVELOPMENT PROJECT CLIENT: SAUDI ARAMCO Dec 2010 to Till Date Jeddah Saudi Arabia POSITION: Sr.SAFETY ENGINEER Project details: 14km of Infrastructure, sewer line, water lines, Electricity Ext…. 5 Bridges, Express Highway& 25km of Road works Tunnels, Consternation’s of Shopping Malls Towers, & Villas

PANGULF VALVSERVE Sep 2007 to Nov 2010 Jubail Industrial Area, Saudi Arabia POSITION: SAFETY ENGINEER

Activities Performed:

Preparation of Documents/Drawings such as HSE Philosophy, Hazardous Material List, Fire Protection Philosophy/Design Basis, Fire Risk zone identification & Fire Water Demand Estimation, Fire Water Network Layout, Fire Water Pumping & Network P&ID’s, PFD’s/MSD’s for Fire Water & Foam Pumping Systems, Fire Fighting System Layout for Plant & Buildings, Design of Fire Water Pumps & Fire Water Tanks, Design of Foam Pumps & Foam Storage Tanks, PDS for Fire Water Pumps & Fire Water Tanks, PDS/IDS/TDS for Fire Fighting & Safety Equipment’s, Supply specifications for Fire Fighting Equipment’s, Fire Fighting Vehicles & Safety Equipment’s, Hydraulic Analysis for Fire Water Network & Deluge Systems (Water & Foam Solution), Design of Total flooding systems, Technical & supply specifications for total flooding systems, MTO & RFQ for Fire Fighting Systems, Review of Vendor documents for firefighting, Fire & Gas detection philosophy, Identification of F&G Zones, Selection of Type of F&G Detectors, Fire & Gas Performance Target Criteria, Fire & Gas detection Layout, Fire & Gas Matrix/Diagrams, Fire Proofing Philosophy, Fire Proofing Drawings & Schedule, HAC Philosophy/Report, HAC Datasheets/Schedule, HAC Drawings (Layout, Elevation & Typical), Blast Over Pressure Modeling based on Multi-Energy Method in PHAST software for preparation of Blast & Explosion Analysis report,SOW for HAZID, HAZOP, QRA, SIL, HSEIA etc., Review and endorsement of FEED documents during proposal stage related to firefighting/fire & gas/fire proofing/HAC/ QRA/Flare & Radiation Analysis/ Fire Risk Assessment Studies /EIA/SIL/HAZOP & HAZID close out report etc.

SAUDI ARABIAN FERTILIZER COMPANY (SAFCO IV) (SABIC)

March 2005 to Jul 2007

Ammonia / Urea Expansion Project, Jubail Industrial Area, Saudi Arabia.

POSITION: SAFETY ENGINEER

LINDE – SHARQ 3RD EXPANSION (SABIC)

Jan 2004 to Feb 2005

POLYETHELENE PROJECT, Jubail Industrial Area, Saudi Arabia.

POSITION: SAFETY SUPERVISOR - HSE & LOSS PREVENTION

DUTIES AND RESPONSIBILITIES

Report and assist the Project Safety Supervisor / Manager in the overall

Implementation of approved Project Safety and Loss Prevention Program.

Performing continuous monitoring at work site to ensure continuing conformance of

fieldwork force with all relevant safety, health and security requirements, programs and

Other existing pertinent policies.

Assist Safety Supervisor in carrying out his duties and responsibilities and supervisory

And for other functions on the project.

Assist Safety Supervisor in conducting full investigation of accident / incident, including

Near-misses.

Determine probable causes, develop, circulate and enforce appropriate permanent

Preventive measures.

Carry out daily site surveys to ensure: only safe work methods are in operation,

Adequate fire and fall protection are in place, adequate welfare and first aid facilities are

Properly maintained, approved tools are being used and sufficient Personal Protective

Equipment provided and properly worn.

Conduct documented Pre-Deployment Safety Orientation with new site employees prior

To mobilization to project site.

Closely monitor scaffold erection / dismantling work, permit-required confined space

Entries, crane work / lifting operations, hot work, equipment energization, tie-ins, and

Similar hazardous activities.

Ensure that all relevant HSE requirements are complied with the Project requirement.

Check and ensure compliance of site work-force with the approved Safe Work Permit

System / Procedure in the plant.

Participate at Corporate / Project-developed Safety Training / Incentive and Awareness

Programs and attend safety meetings with the client / other contractors.

Advise the Project Management thru the Safety Supervisor, as a result of field safety

Monitoring, on:

I. Ways to improve existing work methods to better accident /

Incident prevention.

II. Identify and foresee safety hazards which may affect health.

III. Welfare of site employees and their execution of work.

IV. Areas of concern at site where stricter control is required for an effective loss prevention & loss control.

V. Required changes, supplementary instructions and other safety aspects essential to improve the existing safety program.

WORK EXPERIENCE (INDIA):

FOURESS CONSTRUCTION AND CONTRACTING COMPANY

April, 1999 to Sep, 2003

Jindal Steel & Power Ltd., Hyderabad, India.

POSITION: SAFETY ENGINEER - HSE & LOSS PREVENTION

DUTIES AND RESPONSIBILITIES

Anticipate / identify, monitor and evaluate all the HSE hazards in the company and Give

Recommendations to Line Managers / Department Head for controlling hazards.

Look after and guide / advise the management in taking appropriate decision pertaining

To any OH & S issues.

Guide and Conduct routine HSE Inspections, bi-annually Internal Audits and quarterly

Management Walk Around for the refinery plant areas, workshops, buildings, camp etc.

Guide general medical clinic / and the contracted medical centers on OH Procedures /

Issues.

analyze statistically and evaluate the OH & S and Medical data / results for taking

Further action to control / minimize OH & S hazards / exposure and illnesses.

Regular monitoring for all the contractors' HSE system and guide them on OH & S

Issues.

Active role in emergency mock drill, any OH &S assessment, survey, campaign and

Management review meetings

.

Investigated and developed plans for monitoring of personnel / workplace with such

Issues as PPE, Chemical, Physical and Biologically active agents, etc. to ensure that

Working conditions are maintained at the optimal level of industrial HSE standards.

Conducted measurement of work environment to evaluate sources of airborne chemical

Contaminants, physical agents (noise, heat, light, radiation etc.), to identify prevailing

Health hazards, personnel at risk, task analysis and the type and extent of further

Monitoring required.

Prepared conducted and assured implementation of periodic educational programs to promoting employees awareness.

Conduct Training Programs on several OH & S subjects.

monitoring for OH &S hazards (chemicals, noise and heat)

Prepare Report s for all the services done and presented to the concerned company

Management.

CORE PROFESSIONAL STRENGTHS:

HSE Objective development & implementation

HSE Risk Assessment, Inspections & Internal Audit

PPE Management

Review Contractors' Emergency Response Plan

Accident Near miss Investigation & Monitoring

Reducing Work-related Injuries / Illnesses (Severity & Frequency Rates, LTI)

HSE Presentations and public speaking

Educational Qualification:

Bachelors in Mechanical Engineering 1996 Osmania University

Nebosh International Certificate New International Fire Safety & Risk Management certificate

Post Graduate diploma in Construction & Oil & Gases Safety

One year Diploma in Fire & Safety in Construction

Skills & Expertise

1. QRA :Quantitave Risk Assessment

2. HAZOP : Hazards and Operability Analysis

3. LOPA : Layer of Protection Analysis

4. SIL : Safety Integrity Levels

5. PHAST : Process Hazard Analysis Software Tool

6. PHAST RISK

7. PFP : Personal Fall Protection

8. F&G : Fire and Safety System

9. HSE : Health and Safety Employment

10. COMAH : Control of Major Accident Hazards

11. HSEIA : Health Safety and Environmental Impact Assessment

12. PHAPro : Process Hazard Analysis

13. RAM : Radio Active Materials

14. RCM : Reliability Centered Maintenance

15. FAT : Fault Tree Analysis

Specialties:

HSE, Risk, Safety, Reliability, Functional Safety, QRA, HAZOP, HAZID, LOPA, FMECA, Bow-Ties, COMAH, HSEIA, HSECES, Integrity, SIL, RAM, RCM, FSA, FEHA, FTA, ETA, F&G, PFP, AFP, HAC, IP15, NFPA, API, IEC 61508, IEC 61511, TOTAL GS, SHELL DEP, ADCO HSE TG, ZADCO TG, ADNOC COPs, PHAST, FLARESIM, PHASTRisk, SILCore, PHAPro, PHAWorks, TAROS, MAROS, Oil Gas, Petrochemicals, Chemicals, Refining, Transportation, Marketing, Offshore, Onshore,Downstream,Upstream, Greenfield, Brownfield, Eur Ing,TUV,FSE

Personal Details:

Name : Mohammed Nizamuddin

Date of Birth : 10- Feb-1974

Place of Birth : Hyderabad (India)

Nationality : Indian

Religion : Islam

Marital Status : Married+2

Languages Knows : English, Arabic, Hindi, Urdu

Iqama Status : Valid & Transferable

License : Saudi Driving License

&

Qatar Driving License

Contact this candidate