Senior Welding Inspector

CURRICULUM VITAE

Position : Senior Welding Inspector /Piping/Structure

/ Mechanical

Name : Wong Kim Sin

Address : *****, ***** ***** *, ****** Putra IOI

***** *****, *****.

Contact No : 07-5983059, 019-*******, 013-*******, 02-84342179

Date of Birth : 3rd July 1954

N.R.I.C : 540***-**-****

Nationality : Malaysian , Singapore Permanent Resident

Sex : Male

Marital Status : Married

Email : ********@*****.***.**

Academic Qualification:

1967 ~ 1975 : G.C.E holder in Sekolah Sultan Ibrahim, Kulai.

1978 : H.S.C pass holder as a private candidate.

Technical qualification and courses:

July 19 ~ 24 1999 : TWI Welding Inspection Steels course.

: Visual Welding Inspector certification.

24 Oct 2001 : TWI CSWIP of Welding Inspector 3.1 Cert /No: 5630.

(With RI Group A)

Oct 2009 : RI CSWIP 3.4 Cert /No: 45482

15 March 2010 : SWI CSWIP 3.2 Cert/No: 46400

07th ~10th August 2002: Oilfield pipelines Inspection Sdn. Bhd.

Seconded to J Ray McDermott, Batam Island Base.

Subject: CAMERA INSPECTION Training.

To detect and views the defects location in the weldment root bead of the CRA materials by using the remote camera place inside of the pipeline, to distinguish the difference between the actual weld on the root beads appearance in the monitor. Interpreting the defects as appears in the radiographic film and makes a decision regarding appearance and quality finish of the root bead.

Summary of capabilities and experiences

A progressive career which has provided with a working experience of Q.C inspection and Quality Assurance services in the Marine, Oil & Gas industries e.g. Marine modules, Steam Boiler ,Pressure Vessel, Petrochemical / Oil Refinery / Floating Production Storage and Offloading (FPSO) construction and conversion projects for the past 10 years. Besides in Malaysia, I have worked extensively in several projects in Singapore.

Initially trained as a Site Supervisor and subsequently progressing through experience and dedication to take up position as a Quality Assurance personnel.

Responsibilities have encompassed all aspects of quality control work, including co-ordination; monitoring construction practices implementation specifications and interaction with Clients / Certification Body Inspector / Production Management.

Through past experiences has cultivated strong skills of communication and problem solving including importantly adhering and monitoring to the safety aspect on the job.

Experiences ~

Main areas of responsibility include inspection and supervision of project fabrication / construction activities: ~

Construction of the Modules and the Jacket, and the Furnace & Pressure Vessel. Construction and conversion jobs of FPSO and Jack up Rigs.

New construction and shutdown maintenance of Petrochemical plant & Oil refineries including at offshore platforms. Materials inspections. Shop fabrication, site installation and erections of piping, steel structures and vendor supplied equipments. Daily monitoring site construction, QA/QC activities of fit-up and welding. Witness WPQT and Welder Qualification Test. Assigned to cover all pipe spools shop fabrication, field erection and NDE activities for materials ranging from carbon steel, Low Alloy, Low Temp, austenitic stainless steel, duplex and super duplex (A 790- UNS No. S 32750), high nickel alloys and aluminum and copper nickel and other special metals .Review of NDE procedures, NDE report, and witness mechanical destructive testing of weld and materials. Witnessed pressure testing, overall tightness system testing, line flushing and oil flushing on piping. Verification of piping system reinstatement. Review of Manufacturing Data Report / Dossier.

Working Experience:

July- Nov , ‘11: MJ INSPECTION CONSULTANCY SDN.BHD

Vocation: Reliability Inspector/QA/QC Inspector

Project: Titan/Malacca

July ’10- May, 2011: ExxonMobil Refinery & Chemical Plant Singapore.

Vocation: QA Inspector

Project: SPT/ IRF Completion Team

Responsibilities: Review all the mandatory documents / procedures/Method Statement submitted by the main contractor either in Mechanical or piping or Civil or Coatings and sign off acceptance with or without comments before the contractor start to work. These documents are consisting of Project Quality Plan, Site internal Quality Audit procedure, Mechanical and Piping and Civil and Coatings Inspection Test Plans and various procedures, Welder WQT Procedure, WPS & PQR for Structure and Piping, NDT procedures such as RT, LPT, UT, MPI, PMI, and PWHT. Witness all the ITP hold points especially Hydro Test, randomly checking P&ID and isometric drawings during installation, check welders performance during the course of welding and joints fit-up, ensuring all the different kind of works are complying with ExxonMobil GP, RIS specification; review various system dossiers as well.

Nov ’09- Feb ‘10: BHP Billiton, Australia. In MMHE Shipyard.

: Foster Wheeler (Malaysia) Sdn.Bhd. Malacca

Vocation: Senior Welding Inspector/Radiography interpreter

Project: PSR-2 Revamp Project/Turnaround ’09.MRC, Malacca.

Reference: Peter Kirkbride

March 2008 – Sep ‘09: Foster Wheeler Asia Pacific Pte. Ltd.

Vocation: QA/QC Engineer

Project: S-HCF Expansion, PAC Refinery; ExxonMobil Singapore.

SEPC-MEG PROJECT, Shell

Reference: Wee Kim Peow, Lim Beng Guan (ExxonMobil)

Nigel Hogg (FW)

Responsibilities: To check dimension and cleanness and witness the casting of “Chockfast Red” grouting on the equipment foundation. Inspecting various types of valves install on the pipes are followed with the bills of materials. Inspection and surveillance of the piping erection and witness the hydro test of the difference types of storage tanks. Check and surveillance randomly on the pipes colour coding are complies with the client specification and visually inspected/check the weldments according to the WPS and ITP. The reference documents used are followed Exxon Mobil GP, GII and RIS. Reviewing the RT films, randomly witness NDT technicians to carry out LPT, MPI and PMI at sites. Reviewing the test packages are properly compiled and witness the hydro test. Randomly check insulation materials used for installation on the hot piping and equipments. . At the MEG Project, additions work is to surveillance the erection of tanks from bottom plate until tank completion, including witness oil test and hydro test and finally painting. Another major activity is the application of the Tight Build and Clean Build on the Shell MEG project. The first of it types to implement in Singapore oil & gas industries.

May – January 2008: Sonatest. Singapore.

Vocation: DNV Surveyor

Project: Manufacture offshore containers & 9.2M Cable

Reels,Sattahip,Thailand.

Responsibilities: Reviewing TAC or DRR approved drawing, ensuring the fabricator follow approved drawing to manufacture all the offshore containers and the offshore cable reels. Reviewing and witness all the relevant PQRs testing, witness and approved the required mechanical test Root Bend test, Face Bend test, Tensile test and the Impact test. Endorsed all the qualified WPS. Witness welders qualification test and approved welders certificates. Verified the materials for fabrication and reviewing mill certificates and welding consumables. Reviewing the reports on traceability of materials and inspection in the primary structure, Visual inspection of weld preparation, welding, alignment, material marking etc. Random check the dimension control reports. Reviewed NDE documentation and reports. Review load cells calibration certs, witness the prototype test, production test and lifting tests as stated in the general arrangement drawing. Reviewing report from final inspection. Issue inspection release note for the products to ship out when manufacturing inspection are found satisfaction. Signed off the product by issue “Certificate for Offshore Container” or “Certificate of Conformity”. Ensuring the society’s emblem for offshore containers will be affixed to the containers and the certificates number will be hard stamped into the corner frame. All the offshore containers certified to DNV’s Standard for Certification 2.7-1 and cable reels certified to DNV’s Standard for Certification 2.7-3.

Reference: Raymond Poh, Yeo Nyek Tong

June 2006-April 2007:JGC SP(M) SDN.BHD.

Vocation: QA supervisor

Project: Titan Cracker#1 H-114 Furnace Project, Pasir Gudang.

Responsibilities: Plan, coordinate and supervise all the sub-contractor inspection activities at site. Reviewed all the contractors’ quality plan, inspection and test procedure. Verified all the quality control inspection and test procedure have been approved. Checking the vendor supply materials and the received materials are compliance with the company specification and the relevant standards. Witness and verified all the subcontractor WPS &PQR partial mechanical destructive test of the weldment and materials and also the welders qualification test. Random inspect the fit-up and the welding to ensure all the welding activities done are compliance the specification. Strictly control all the consumables and the welding parameter are compliance to the steam boiler and the radiant coils codes and standards. Witness the various portion of the dimension survey during the erection sequence of the furnace. Verified the welding inspection, surface preparation and painting and coating inspection are compliance to the codes and standards. Coordination of the radiography work requirement for the relevant task and reviewed the interpretation of the RT films. Witness the LPT, PWHT and the hardness test are done according the respective specifications Punch out and clear all the incomplete construction activities. Witness the hydro test, pneumatic test, water flushing, air blow, reinstatement and the like to ensure compliance with the company specification and the relevant standards. Compiling all the documentation properly before handover to the client.

Reference:AW SIN POW.PETER HO

April -MAY: MJ INSPECTION CONSULTANCY SDN.BHD.

Vocation: Welding inspector

Project: DEL Project, Qatar

Seconded to JGC at PEC, Singapore

Responsibilities: Witness the WQT, check the identity of the tested welders, inspect the pipe edge preparation, visual inspection on the root pass, random check the welding parameter and surveillance inspection on the Capping. Review the RT report and finally sign off the required WPQR by applicable code ASME 1X BOILER& PRESSURE VESSEL CODE 2004Edition

Feb-March: MJ Plant Assessment & Inspection

Vocation: Third Party Inspector

Project: Titan Turnaround 2006

Seconded to Titan Petchem (M) Sdn.Bhd.

Responsibilities: Monitoring and surveillance inspection of the radiant coil located inside the furnace for coil replacement and the radiant coil shortening. The fit-up and the visual inspection of this special metal is exactly according to the applicable WPS and engaged with highly qualified welders and the correct filler rods. Witness the proper ways of the DPI are applied on the Root pass and the Capping. Ensuring that no imperfections are appeared during and after welding process. Surveillance inspection of the pre and post inspection of the heat exchanger and the pressure vessel, ensuring that no defects and the

Cleanliness is in acceptable condition before close up.

Project: Otway gas project, Package 4a: Offshore Facilities.

Seconded to Woodside Energy Limited, Project Fabrication and Erection in MMHE

April- November 2005: Campbell Asia Pacific Pte Ltd, Singapore.

Vocation: Piping Inspector. Pasir Gudang.

Reference: Art Savacool, Nuron Idil, Joe Tan

Dec2004-Mac2005: Pacific & Oriental Inspection Agency

Vocation: Welding Inspector

Project: P-52 Semi Submersible Lower Hull Construction

Seconded to KeppelFels Offshore & Marine

Responsibilities: To monitor and inspect the early stage of the material verification of plate metal and HP stringer together with the special z area plate metal. Monitoring and inspecting the daily activities from the fit-up and visual the panel fabrication to the sub assembly of the block& column. Monitoring and surveillance of the structure works of the fabricator are complied with the approved Engineering Design latest revision drawings, certified WPS and the correct weld symbols. Ensuring that the welding consumables and filler coils are confirmed to the respective jobs application. Conducting the requirement of the NDT(MPI,UT,RT)of the various inspection categories, and also reviewing and sign off the respective NDT reports. Monitoring the daily work progress, quality and safety standard requirement at site. Reviewing the dimension control report of the column straightness and levelness.

Following the QRM system to do the daily documentation reports and key in the traceability records.

Reference: Jenning Won, Reginaldo Filho

Oct-Dec 2004: MJ Inspection Consultancy Sdn Bhd.

Vocation: Welding Inspector

Project: East Area EPC-1A-GN-Jacket & Piles, MSE, Pasir Gudang, Johor

Seconded to Technip-Coflexip

Responsibilities: To supervise and inspect the fabrication and quality standard for the construction of the rolling cans for the jacket and piles to be erected in Nigeria Gas Compression Platform. Jobs involvements started from the early stage of material verification to visual inspection of various materials and consumables, reviewing of subcontractor various work procedures, witnessing of WPQT,PQR,PTR, Hardness Test, NDE and Grouting Test. Reviewing the Dimension Control Survey Report Straightness and Ovality Report, right up to monitoring daily work activities progress, quality and safety standard requirement at sites. Follow up the corrective action proposals to close the NCRs. The project are completed as per scheduled without any major loss time incidents.

Reference: Sathis Kumar, John Mc Cluskey.

September 2004: Technilink (M) Sdn Bhd.

Vocation: Structure inspector

Project: Asian Rare Earth Project, Bukit Merah, Perak.

Responsibilities: Seconded to Leighton Contractors (M) Sdn Bhd as a structure inspector to fit –up the construction bins as compiling with the drawing. Every piece of the base metals are well attached and properly protected by a layer of synthetic rubber .Carried out the visual inspection at the stringent requirement. Witness the leak test by the water, ensuring that no soil debris (soluble or solid) containing radioactive materials are leaking during the transportation on the way to the remote areas. Every personnel are required to check by the radioactive sensitive meter in order not to carry out any radioactive materials away from the site.

Reference: Richard Wood, Wong Nyet Hing

June 2003 ~ tentatively till end of July 2004: Mat Eval NDT Service Pte Ltd.

Vocation: Structure & Piping Inspector

Project: Petrobas-50 FPSO Conversion project, Jurong Shipyard.

Responsibilities: Seconded to Jurong Shipyard Ltd. initially as a steel structure inspector and was later entrusted to carry out the inspections of the piping fabrications and erections.

Duties as the steel structure inspector included from material verification and inspection right up to the inspection on the structural of the hull, primary and secondary structure of main decks. Verification works on the Change Construction Notice issued on the ship hull and the main decks structures.

In the piping discipline, besides daily liaising with the clients’ and subcontractor inspector, inspections of fit-up and final visual inspection of the completed weldments. Monitoring and surveillances of piping works as to conformity with the WPS requirements. Part of the job duties also included reviews of the test packages, line check, pressure test, flushing and line reinstatements for the equipment package and common pipe rack piping.

Reference: Mr. Wang Zi Chian, Mr. Chowdury Soofi Nur Mowla

10th. Dec.2002 ~ 31st. May 2003: Mat Eval NDT Service Pte. Ltd.

Vocation: QC Inspector

Project: Petrobas-43 FPSO Conversion Project, Jurong Shipyard.

Responsibilities: Duties in the pipings inspection included material verification, consumables identification, Fit-up and final visual inspection of the completed weldments. Monitoring and surveillances of piping works as to conformity with the WPS requirements. Part of the job also included coordination work and request for the weldments N.D.T percentage. These duties are performed together with the clients’ Inspectors. Preparation of the reports and summary sheets for final documentation.

Reference: Mr. Zhao He, Mr. Seetoh Ming Fui

25th. June ~ 24th. Oct 2002: Oilfield Pipeline Inspection Sdn Bhd

Seconded to J.Ray McDermott.

Vocation: Q.C Inspector

Project: EMEPMI 2002 Offshore Installation Program

Responsibilities: Duties in the pipings inspection activities besides material verification, consumables inspection also included checks on the materials thickness, fit up bevel angles, cleanliness, condition and colors coding of the pipe used on the project. Random checks on welding parameter and holiday detector inspections. Besides visual on the completed weldment inspection also included inspected the piping external Serviwrap wrappings and the infill foam. Activities also included pressure test, line flushing and preparation of the final documentation submissions.

Reference: Mr. John Barkley, Mr. Willie Black

Jan 2002 ~ till end of April 2002: Wijaya Engineering Sdn. Bhd.

Seconded to Sime SembCorp Engineering Sdn Bhd at Pasir Gudang.

Vocation: Q.C Inspector ( Piping )

Project: E11R-B

Jan 2000 ~ Dec 2001: Dynac Sdn Bhd

Seconded to Sime SembCorp Engineering Sdn Bhd at Pasir Gudang.

Vocation: Q.C Inspector ( Piping )

Project: Angsi-A development project

Jan 1999 ~ Dec 1999: Airpex Mechanical & Engineering Sdn Bhd

Seconded to Sime SembCorp Engineering Sdn Bhd At Pasir Gudang

Vocation: Q.C Inspector ( Piping )

Project: Resak

Responsibilities: Duties in the pipings inspection activities for the 3 above stated projects besides material verification, consumables identification also included inspection of the pipe dimension and conformity. Daily activities of joints fit-up, weldments visual inspection, conformity of erected piping lines with isometric drawings also included witnessed of the valve leak test and PWHT. Those duties are performed and coordinated with the clients’ and subcontractor Inspectors. Activities also included pressure test, line flushing, line reinstatements and preparation of the final documentation submissions.

1998 ~ 1999: Seconded to Chiyoda Corporation

Vocation: Commissioning Foreman

Project: PSR phase II-Malacca Refinery

Responsibilities: Scheduling and monitoring of the daily work progress as per Project schedule and priorities and requirements. To ensure that that the work and inspections was carried out in accordance to the project specification, approved procedure and safety regulation.

1996-1997: Warga hikmat Engineering Sdn Bhd at Malacca

Vocation: Piping Foreman

Responsibilities: Lead group of workers in preparation, fabrications and installation of the various piping works. Activities were done and carried out according to the approved projects specification and procedures. To ensure that the activities were carried out as per the submitted erection and safety methods statements.

1994 ~ 1996: Unimas Engineering Sdn Bhd

Seconded to Sime SembCorp Engineering Sdn. Bhd. At Pasir Gudang

Vocation: Q.C Inspector ( Piping )

Project: M3

1993 ~ 1994: Dynac Sdn Bhd

Seconded to Sime SembCorp Engineering Sdn. Bhd. At Pasir Gudang

Vocation: Q.C Inspector ( Piping )

Project: Guntong B

1992 ~ 1993: ABADI Engineering Sdn Bhd

Vocation: Q.C Inspector ( Steel Structure )

Seconded to Sime SembCorp Engineering Sdn. Bhd. At Pasir Gudang

Project: Dulang C

Responsibilities: Duties in the piping and steel structures inspection activities for the 3 above stated projects besides material verification, consumables identification also included inspection of the pipe dimension and conformity. Daily activities of joints fit-up, weldments visual inspection, conformity of erected piping lines with isometric drawings. Those duties are performed and coordinated with the clients’ and subcontractor Inspectors. Activities also included pressure test, line flushing, line reinstatements and preparation of the final documentation submissions.

As for the responsibilities and duties as the steel structure inspector included from coordination and liaising with the clients’ and subcontractor Inspectors. Activities of inspection included material verification and inspection right up to the inspection on the fit up and welding works on the structural of the modules and jackets, primary and secondary structure of main decks and fittings. To ensure that that the work and inspections was carried out in accordance to the project specification, approved procedure and safety regulation

Contact this candidate