Curriculum Vitae

Position: - Rotating equipment mechanic

________________________________________

Permanent Address

Jagathy C Krishnan

Chalekkandathil house

Kongorppilly P O

Eranakulam dist

Kerala- India

009***********

E-mail: c5v6ro@r.postjobfree.com

c5v6ro@r.postjobfree.com

Present Contact No. +966*********

________________________________________

Professional Objectives

To succeed a challenging position of Senior Mechanical foreman, where my capabilities can be exploited for the growth of the company and provides ample scope of career growth.

Career Summary

________________________________________

Experience of more than sixteen Years in the field of Maintenance & Constriction in Petrochemical / Oil and Gas Industry, as per safety rules and Permit to Work System. Familiar with hazardous area classification, type of equipments to be used in that area.

Qualifications

•Diploma in Mechanical Engineering

•N.A.C (National Apprentice Certificates) in MMCP Trade (Mechanical Maintenance and . Chemical Plant) FACT Udyogmandal Division Eloor, Kerala.

Computer knowledge: Familiar with MS office packages and internet

.I T I fitter

.S S L C (secondary school leaving certificate)

Detail experience profile

Specialized in the flied of maintenance and trouble shooting of the equipments such as

Centrifugal Pumps (single & multistage) GLOUDS, FLOWSERVE, EBARA

Duty performed: in brief

Overhauling, maintenance and troubleshooting

Checking and maintaining of shaft run out

Checking and maintaining all pump running clearance (wear ring, backplane etc.)

Mechanical seal replacement (cartridge & non cartridge)

Screw and Gear Pumps(IMO,MYCOM)

Duty performed: In brief

Overhauling, maintenance and troubleshooting

Blue check for gear contact, adjusting endplay, and bearing clearance

Installation of mechanical seal

Checking backlash

Steam turbine

Name of equipment handled: ELLIOTT, COPPUS, and DRESSERRAND

Duty performed: In brief

Overhauling, maintenance and trouble shooting

Checking clearance of all plain journals and tilting pad journal bearing.

Checking and adjusting axial clearance

Checking and adjusting nozzle clearance

Adjusting over speed trip & mechanical governor speed setting

Inspection, maintenance and installation of labyrinth and carbon ring Inspection and maintenance of lube oil cooler, filter and auxiliary equipment

Reciprocating Compressor PIGNONI, DRESSERRAND

Duty Performed: in brief

Overhauling, maintenance and trouble shooting

Reconditioning, installation of suction and discharge valves

Adjusting piston head end and crank end clearance

Checking and maintaining clearance of main and connecting rod bearing

Inspect, measure and record piston and cylinder diameter

Inspect, measure and record piston rings, rider rings and piston ring groove.

Installation of packing rings and wiper ring

Check crankshaft deflection.

Centrifugal compressor

Name of Equipment Handled: ELLIOT, DRESSERAND (CLARK), MITSUBISHI

Duty Performed: In brief

Overhauling, maintenance and troubleshooting

Checking tilting pad journal bearing and pad type thrust brg.clearance

Inspect, maintain rotor centering and bearing axial clearance

Inspect, measure and record of labyrinth clearance and replacement

Inspect, maintain seal oil, lube oil system, filters, coolers, accumulator and oil purifier etc.

Gearboxes (LUFKIN, CHEMINEER)

Checking backlash, axial float,

Bearing inspection and changing

Fans & Blowers

Carry out regular maintenance activities of ID & FD fan

Fin fan coolers (Belt changing, pulley changing, bearing replacement)

Mechanical seals (JOHNCRANE, FLOWSERVE)

Installation of all types of mechanical seals (single internal and external mounted seals, Double seals, Tandem seals) manufactured by John crane, Flow serve etc...

Handle Cartridge and Non cartridge with different types of API flushing plan

Alignment

Rim and face method

Reversal alignment (graphical, formula method & laser)

Professional Experience Abroad

Project: - Saudi chevron petrochemical company

From 2010 to till date

Working as a Mechanical Foreman. Key person of Plant commissioning

activities of Ethylene and utilities

Company profiles:- M/s Al-Yusr Townsend & Bottom Company Ltd Jubail, KSA (ISO 9001-2000).

Well known company for plant construction, metal fabrication, operation and maintenance services for the oil refining, gas processing, chemical and petrochemicals, power generation and desalination sectors in the Kingdom of Saudi Arabia and other GCC countries.

Project: - Saudi International Petrochemical (ISO 9001-14000)

From 2oo8 to 2010

Working as a Mechanical Foreman. Key person of Plant commissioning activities of Acetic acid, VAM and utilities & major shutdown of Methanol & BDO Plant.

Commissioning & Star up activities. Main Compressor lube oil system flushing pump suction & discharge lines flushing, Pump, Fin Fan mechanical run test, Turbine mechanical Trip test, Hot & cold alignments of all the pump after mechanical run test.

Shutdown of Methanol & BDO Plant: - Main jobs were replacing the Syn gas

Turbine Rotor assembly made by Nuovo Pignone (Italy) Atlas Capoco Hydrogen centrifugal compressor Dry seal replacement, Chiller Screw compressor Overhauling, Reciprocating Diaphragm Pump Overhauling such as replacing diaphragms, seal packing & Overhauling of Famuric Acid Extractor (Centrifuge)

Job Description:

• To attend the daily break down activities.

• PM activities of all types rotating equipments as per planning.

• Pump overhauling, replacing bearings, Shaft, Mechanical seal re-installation & perform the alignment.

• Overhauling of gearbox, Air fan cooler, Blowers, Electrical Motor bearing replacement.

• Steam Turbine overhauling replacing sleeve & journal bearings carbon rings.

• Trouble shooting of rotating equipments such as high vibration, pump not pumping, seal failure, bearing failure.

• Carry out the alignment Reverse method, Rim & Face, laser alignment.

Project: - SAUDI PETROCHEMICAL COMPANY (SADAF)

From 31st may 2000 TO 28TH Feb. 2004 CA/EDC PLANT

Position: - Millwright technician

Job Description

• To attend the daily break down activities.

• Follow up PM activities.

• Repairing and Overhauling of magnetic (seal less) pumps, Vertical(sundyne) pump

• Overhauling of various type of Compressors, Pumps, Gearbox’s, Fin fan, & Centrifuge.

• Alignment Reverse Type, Rim & Face, Laser alignment.

Turn Around Activities: - Overhauling of Centrifugal, Reciprocating & Screw

Compressor, Steam Turbine, gearbox, Pumps, (Single & Multistage) Fin-

Fans & Centrifuge.

Project: - Saudi Armco shell refinery company

Position: - maintenance millwright (Duration June 1998 to April 2000)

Job Description

• To attend the daily break down activities.

• Follow up PM activities.

• Overhauling of various type of Compressors, Pumps, Gearbox’s, Fin fan, & Centrifuge.

• Alignment Reverse Type, Rim & Face, Laser alignment.

• Trouble shooting of rotating equipments such as high vibration, pump not pumping, seal failure, bearing failure

Project: - push pickling line and acid regeneration plant at Hadeed 2 project

Position: - Millwright technician (Duration 1997to 1998)

Job Description

• Erection & Alignment of various type of equipments ( Compressor, Pumps Blowers, Gear Box, conwayer rollers, Vessels,)

Experience In India

Project: - The fertilizers and chemicals travancore limited. Sulfuric acid plant, Amoniya plant, Posphoric acid plant

Position: - Mechanical Technician (Duration Nov 1994 to Nov 1996)

Job Description

• Follow up PM activities.

• Repairing and overhauling of (liquid sulphur ) Vertical pumps

• Tilting pan filter repairing

• Changing the bearing of screw conveyors

• Changing Buckets and Links of bucket elevators

• Repairing and overhauling of crushers

• Maintenance of ball mill

• Repairing and overhauling of Liquid ring compressors

• Overhauling of reciprocketing compressors

• Overhauling of various type of Compressors, Pumps,turbaine,Blowers Gearbox’s, Alignment Reverse Type, Rim & Face

Project: - Brothers engineering and erectors

Position: - Millwright Technician (Duration nov 1996 to oct 1997)

Erection & Alignment of various types of equipments (Compressor, Pumps Blowers, Gear Box, Fin Fan Vessels, Towers,)

Project: The travancore-cochin chemicals limited

Position: mechanical technician (Duration 0ct 2005 to Aug 2008)

Job Description

• To attend the daily break down activities.

• Follow up PM activities.

• Overhauling of various type of Compressors, Pumps, Gearbox’s, Fin fan, & Centrifuge.

• Alignment Reverse Type, Rim & Face, Laser alignment.

Turn Around Activities: - Overhauling of Centrifugal, Reciprocating & Screw

Compressor, Steam Turbine, gearbox, Pumps, (Single & Multi stage) Fin-

Fans & Centrifuge.

Project: Engineering services

From1992 to 1994

Position: - fitter

Job Description

Repairing and making of pulvarisers, mixers, expellers

Personal Data

Name : Jagathy Krishnan

Age & DOB : 37, 4th april1974

Marital Status : Married

Religion /cast : Hindu

Languages known : English, Hindi, Malayalam.

Passport Details

Passport No : G9825203

Place of issue : Kongorppilly - KERALA

Date of issue : 31/07/2008

Date of expiry : 30/07/2018

________________________________________

Declaration

I do hereby declare that the above information is true to the best of my knowledge and belief

Date: 25/o8/2011 Jagathy Krishnan

Contact this candidate