Automation Engineer with PLC/SCADA Expertise
Resume:
Leonid Varivodov
Elmwood Park, NJ *****
********************@***********.***
Professional Summary
Automation Engineer who is capable of designing automatic controls system using PLC or hard wired control is searching for position with will utilize my experience. Knowledge GMP and FDA requirements. Work Experience
Automation Engineer
INTERPLEX INC
April 2018 to Present
• Robotic Lines programming (EPSON50, EPSON70)
• SCADA, PLC Programing (DI, DO, AI, AO), HMI Programing, Factory talk view studio (Allen-Bradley - Panelview plus 600, 700, 1000 ), RTU (Remote I/O cards), Wonderware intouch.
• Modbus(serial RS232, RS485, IP) configuration and Programing, VFD systems, Step and Servo motors, UPS, PDU, CRACK Units.
• Network: Fiber optic, Switches, IP configuration, instrumentation and control systems.
• Design control system, P&ID, Instrument Index, electrical diagram.
• Calibration and Adjustment all instrumentation devices (PT, FT, FV, TT, ) HARD protocol calibrator 385, BRAIN,
• Measuring Equipment: Fluke, Simulators, Oscilloscope, Sound generators, Frequency generators, Ultrasound devices.
Facility Engineer
SKAE Power Solutions
2017 to April 2018
Responsible to keep Data Centre facility up, including practical experience of operating, troubleshooting and maintenance of Data Center critical Mechanical and Electrical Support System.
- Data Center power system
- Electrical and mechanical equipment including generators
- Critical system such as: PDU, UPS, CRAC units
- Air handling units and CHILLERS.
- BMS - Building management system
Instruments, Control and PLC Engineer
Taro Pharmaceutical
May 2007 to January 2017
Responsible in the upkeep of all facility instrumentation systems and equipment to ensure the integrity of all categorized monitoring and regulatory systems such as Distributed Control Systems, Programmable Logic
Controllers, Press and Granulation machines, DCU Systems, Flow, Pressure, Level and Temperature instruments, like transmitters, sensors and proximity switches, and final controlling elements, such as valves, relays, transducers, converters etc.
Executes routinely preventive maintenance procedures on all categorized instrumentation and control systems and equipment based on schedules develop by the Supervisor. Troubleshooting instrument related problems.
• Perform electrical design and programming of automatic and semi-automatic assembly.
• Monitor the performance of critical systems, control equipment, DCU(dust collect unit), CIP(clean-in- place)
• Design additional instrument loop drawings from field to Emergency Shutdown System/ Distributed Control
System
• Design and trouble shooting SCADA system.
• Testing and commissioning of additional interlock and loops to ensure proper functionality.
• Perform ajustment and calibration of pressure transmitters (PT and PDT), termo transmitters (TT), analog and on/off control valves (CV), level transmitters (LT), flow transmitters (FT), (such Rosemount, Yokogawa, SMART, Endress&Hauser, ), micro switches, Ito D, Doti, Pt Op, ItoP convertors.
• Performed programming of PLC and HMI (Schnider Electric, Ultrasonics, Omron, Allen Bradley, Siemens, Telemecanique)
• Design and maintenance VFD systems (ABB, Powerflex, Telemedicine, Schnider Electric, Mitsubishi, Vagon, Delta, ..)
• Servomotors, Step motors, DC motors and appropriate drives.
• Trouble shooting, repair:
• Press machines (Fette 1060i, 1080i, 1090i)
• Granulation machines (Glatt, Vector, Nairo)
• Cream filling machines, liquid filling machines.
• Coating machines (Vector, Glatt)
• Tablet counting machines (Swift pack, ).
• Blister machines (IMA, Marcher).
• V-blenders, Bin-blenders system.
• Capsule filling, check weighting machines (BOSCH).
• Industrial visual system (Cognex, Banner)
• Barcode, Pharmacode rider system (ARGUS 5012, ARGUS 4, Banner)
• Weighting system(Mettler Toledo) analytic, half-analytic, design new wefting system whis load cell.
• Label it, cartoned machines (Bergami, BA-100)
• Sealing machines, Induction cap sealer machines.
• Temerature controllers (Omron, Denisco, Radix, Dwyer, ) RTD, Thermocouple, DO, AO, PID regulation, Counters.
• Power supplay AC/DC.
• Relay, SSR, Semiconductor devices.
• Aluminium printing system HAPA-219
• Ability to use FLUKE multimeter, Simulators 4-20Ma, HARD communicators, BRAIN communicator, Oscilloscope, RTD and Thermocouples simulators, Sound generators.
• Abulity rpair different electronic devices, power supplay, VFD, Ultrasonic system.
• Abulity to read and use P&ID, electrical loops and diagrams, instrument index list.
• Knowlge Serial connection RS- 232, RS 485, MODE BUS, remote connection by Ethernet, VPN connection, IP protocol, Network connections.
• Switches (Proximity, capacity, ultrasonic, magnetic, photoelectrik, ) PNP, NPN, AC, DC.
• PH, conductivity, PPB meters.
Instruments and PLC Engineer
Environmental Energy Resources, LTD
August 2006 to May 2007
- Design and develop interlocking logics and configurations as required by the Operations
- Monitor the performance of critical systems and control equipment
- Perform maintenance of pressure transmitters (PT and PDT), termo transmitters (TT), analog and on/ off control valves (CV), level transmitters (LT), flow transmitters (FT), micro switches, pneumatic loops
- Performed circuit boards troubleshooting and repairs.
- Testing and commissioning of additional interlock and loops to ensure proper functionality
- Design and develop interlocking logics and configurations as required by the Operations Instruments and PLC Engineer
July 2005 to April 2007
Design and develop interlocking logics and configurations as required by the Operations
- Monitor the performance of critical systems and control equipment
- Perform maintenance of pressure transmitters (PT and PDT), termo transmitters (TT), analog and on/ off control valves (CV), level transmitters (LT), flow transmitters (FT), micro switches, pneumatic loops
- Performed circuit boards troubleshooting and repairs.
- Testing and commissioning of additional interlock and loops to ensure proper functionality
- Design and develop interlocking logics and configurations as required by the Operation Electrical Engineer
Haifa Municipality
September 1998 to July 2005
- Designed electrical power distribution facilities and lighting for municipal building and athletic complex.
- Performed maintenance of power supply systems.
Power Supply, Automation and Navigational Instruments of Aircrafts Engineer Air Force
1990 to 1998
Performed Maintenance and programming of navigation systems and electronic and power supply equipment of aircrafts.
Language:
- English
- Russian
- Hebrew
Education
Master's
Skills
• Automation engineer
• Programmable Logic Controllers
• Ethernet
• VPN
• Distributed Control Systems
• System design
• Sensors
• Russian
• Calibration
• Assembly
• Electrical wiring
• Product demos
• Communication skills
• Manufacturing
• Computer Networking
Certifications and Licenses
Professional Engineer
Fundamentals of Engineering
Contact this candidate