MOHD IRFAN KHAN
(Health & Safety Officer
(NEBOSH IGC, TRAIN THE TRAINER)
KINGDOM OF SAUDI ARABIA
Mobile: 059*******
Email: adqfti@r.postjobfree.com
adqfti@r.postjobfree.com
(TRANSFERABLE IQAMA)
Iqama Id 241-***-****
Personal Profile Statement / Career Objective
I am a motivated, passionate and hard-working Health and Safety Advisor who is IOSH
, NEBOSH IGC qualified and always strives to achieve the best possible. I am well organized, and I embrace new challenges with great enthusiasm. As part of my work, I have travelled to various locations within the Saudi Arabia partaking in numerous projects.
Achievements
More than Five years of work experience in Health & Safety Department
Team Lead on numerous occasions
Provided H&S training to a class of 50 people
Strong Teamwork Orientation, initiative, Communication, problem-solving, and leadership skills
Positive and Professional attitude, and strong customer service skills 1 . DELTA TURKISH CONT.COMPANY SAUDI ARABIA
PROJECT: HUAWEI & NOKIA – STC, MOBILY & ZAIN SOUTH & EAST REGION
January 2017 – Present Health & Safety Officer
Main duties performed:
Ensuring compliance with Health, Safety and Fire legislation 2 5
Conducting frequent TBT’s (tool box talks), safety training, Basic Risk Assessment training for on-site & off-site staff.
Identifying HSE Hazards and carrying out Risk Assessments
Performing Routine site Audits and Inspections
Carrying out Incident/Accident Investigations
Supervising contractors while on site
Amending the organization safety policies & procedures (when required)
Preparing and presenting reports for senior management
Providing advice and guidance to staff alike on a range of safety issues such as fire regulations, hazardous substances and noise
Organizing training sessions and tool box talks
Attending daily coordination meetings
Assisting the Health & Safety Manager with day-to-day activities
Supporting office staff with record-keeping and data management
Managing the maintenance of vehicles
Ensuring all H&S legislation and policies are adhered to on site
Arranging first-aid training for members of staff
Managing third-party contractors on site
Carrying out routine workplace inspections
Charged with the management of Incident investigation and reporting
Managed Risk involved with complex tasks in a dynamic environment
Managed team of Three EHS Coordinators in supporting diverse EHS field operations
Professional Training and Qualifications
NEBOSH IGC
TRAIN THE TRAINER
ADOSHEM (Advanced Diploma In Occupational Safety, Health And Environmental Management )
OSHA (General Industry Safety and Health)
IOSH Working Safely,UK
IOSH Managing Safely, UK
HAZWOPERM – Hazardous Waste Operations and Emergency Response Management,UK
MOC – Management of Change in Process Safety,UK
BBSM – Behavior Based Safety Management.UK
Environment Management System ( ISO 14001 :2015 )
Control of Substances Hazardous To Health ( COSHH )
First Aid At Work
Essential Fire Safety Principles
Lifting Operations – Essentials of Conducting Lifting Operations Risk Assessment
Investigating Accidents /Incident Awareness
ISO 45001:2018 Internal Auditor Awareness
3 5
Disaster Management With Advance Emergency Response Principles 4 5
Skills
Excellent communications skills
Staff Training and Development
Full Clean Driving License + the ability to work across multiple sites
Understanding technical policies,
EXPERIENCE: 8.8 YEARS
4 Years in GSM, RF Optimization & Planning
2 Years in WCDMA, RF Optimization
2 Years in LTE, RF Optimization & Planning
EMPLOYERS:
1) L&T Technology Services Ltd.
Project: SAMSUNG –RELIANCE JIO
Network: Volte
Designation: Consultant (CLOT ANALYSER)
Duration: September 2015 to April 2016
Location: Reliance Corporate IT Park Mumbai, (India) 2) Samax Telecom Pvt. Ltd.
Project: HUAWEI -AIRTEL
Network: LTE
Designation: Radio Network Optimizer
Duration: April 15 to September 2015
Location: Gurgaon, (India)
3) Manstone Technology Pvt. Ltd.
Project: NOKIA-GDC, LTE
Network: US Cellular & T-Mobile (USA)
Designation: Radio Network Optimizer
Duration: October 2014 to February 2015
Location: Chennai, (India)
Responsibilities:
5 5
Check the Coverage (RSRP), Quality (RSRQ), SNR, DL/UL data throughput, Access failure, RRC Connection drop
Analyze the layer 3 messages and events to find out the reason for causing the HO Failure, RRC Connection Drop, RRC Connection Failure and poor DL/UL throughput.
Doing the Health Check-up for the sites through OSS,EUTRAN Report
Doing the Parameter Audit through the Tool Any Plane
Daily Call with the Customers regarding the Cluster Delivery status. Prepares Drive Test Route for the Cluster as per the Customer requirement
Monitor the KPI on daily basis like Retain ability, Accessibility, & Mobility, DL Thpt
Raise issue Ticket based on service degraded alarm
Based on Traffic trend, also propose for Capacity Optimization, EDT changes, Qrxlevel, System constant etc.
For HOSR effective Cell, Responsible to defined/change Source & Target cell MME Pool IP address, ishoallowed
Check the functionality of LTE sites/cells and verifies the PCIDs with design plan.
Checks the functionality of MIMO antenna technology and hence verifies the Rx Imbalance.
4) LINKQUEST Pvt .Ltd.
Project: NOKIA, Airtel
Network: 2G
Designation: NPI Engineer
Duration: August 2014 to October 2014
Location: Guwahati, (India)
Responsibilities:
Analyzing the standard KPIs(CDR,CSSR,HOSR,UL/DL-Qual, TASR, SDCCH Blocking, TCH Blocking, RLC Throughput,TBF Drop, Hard Blocking etc) and maintain the threshold value with parameters and physical optimization.
TRX planning according to the utilization of sectors.
Planning for new site / additional sector on existing site.
Check E-GPRS Status, Time Slots, Throughputs & Rectifying Data problems.
Site Optimization- Existing & New Sites for Network.
New site planning in Existing Cities depending on Drive test results, Customer Complaints and capacity, this includes following:
To identify the coverage hole or problematic area.
To provide all RF details as Antenna Orientation, Height of the GSM antenna etc.
5) TNS Pvt. Ltd.
Project: HUAWEI–AIRTEL
6 5
Network: 3G
Designation: RF Engineer
Duration: JULY 2013 to JULY 2014
Location: Hubli, (India)
Responsibilities:
Optimization and analysis for 3G KPI’S: RRC setup success rate, RAB setup success rate, RRC setup failure causes, RAB setup failure causes, CS block calls, PS block calls, Voice DCR, CS DCR, PS DCR, HSDPA block calls.
Worked on 3G parameter tuning: PC, CAC, OLC, IRAT threshold to improve the performance.
Daily report analysis for 3G and taking necessary actions to maintain the KPIs for bad cells.
Cluster drive test report and Log file analysis quarterly.
Resolved Call drop reason due to Pilot pollution.
Logs file analysis & layer 3 messages analysis for voice call drop & IRAT Handover.
Coverage analysis on the basis of RSCP plot.
Soft, Softer and hard handover process.
Inter frequency & IRAT Handover.
Reporting events for Soft HO and Measurement reports.
Coverage analysis on the basis of RSCP, Ec/Io Plot.
Primary optimization knowledge for existing RSCP, SC, Ec/Io, RSSI, Pilot Pollution.
Scrambling Code, WCDMA Spreading process, Spreading factor.
WCDMA Codes (Channelization code, Scrambling code) 6) ASTER Tele Service Pvt. Ltd.
Project: ERICSSON-IDEA & AIRTEL
Network: 2G & 3G
Designation: RF Engineer
Duration: March 2009 to July 2012
Location: Gulbarga & Mumbai, (India)
Responsibilities:
Responsible for maintaining the KPI of 5 major BSC’s of Maharastra Circle.
Good Knowledge of Ericsson Parameters-BSC and Cell Level (Voice & Data)
Parameter audit.
Analyzing the standard KPIs(CDR,CSSR,HOSR,UL/DL-Qual, TASR, SDCCH Blocking, TCH Blocking, RLC Throughput,TBF Drop, Hard 7 5
Blocking etc) and maintain the threshold value with parameters and physical optimization.
TRX planning according to the utilization of sectors.
Planning for new site / additional sector on existing site.
Check E-GPRS Status, Time Slots, Throughputs & Rectifying Data problems.
Performing VOICE & DATA benchmarking.
Site Optimization- Existing & New Sites for Network.
New site planning in Existing Cities depending on Drive test results, Customer Complaints and capacity, this includes following:
To identify the coverage hole or problematic area.
To provide all RF details as Antenna Orientation, Height of the GSM antenna etc.
Physical Testing,Check the Particular sites physically for Sector and cables swap, orientation, Tilt, Type of Antenna and all Checking in BTS end.
After Doing Drive Test for a particular site clockwise and anticlockwise to check Rx level, Rx quality, swap interference and Handovers. TOOLS USED:
RTTS
OWS
Actix One 4.6
VUZE 4.5 for Report fetch
XCAP for post processing
Any Plan for Planning
Tems Discovery
GENX Assistant 3.6 for post processing
GENEX Probe 3.6
U 2000
U-NET for Planning
TEMS (8, 9, 12, 13.1).
GENX Probe 1.4,1.52
Net Act Plan editor 4.7-1-1
Actix 4.05.225.011
MapInfo professional 7.0, 8.5 & 9,10
MCOM
Wind Catcher 4.2
Google Earth
GPS (Garmin) 12 & 72 Channels
ACADEMIC TRAINING:
Attended a week seminar on GSM and NANO Technology at IETE, New Delhi. India. 8 5
ACADEMIC QUALIFICATIONS:
B.E in Electronics & Telecommunication Engineering, AMIETE (Institutions of Electronics and Telecommunication Engineering), New Delhi, INDIA.
NEBOSH IGC
IOSH Managing Safely, UK
Post Diploma in Embedded System programming.
10+2 (Intermediate), Aligarh Muslim University (AMU), ALIGARH, UP, India.
SSC (High School), Aligarh Muslim University (AMU), ALIGARH, UP, India. AWARD:
ERICSSON for consistently improving and maintaining KPI. LANGUAGES:
English, Hindi & Urdu
PERSONAL DETAILS:
Mohd. Irfan Khan
Nationality : Indian
Marital Status : Married
Sex : Male
Permanent Address : Mohammad Pur, Gaga Pur
Siddharth Nagar, 272192, Uttar Pradesh, INDIA
Date of Birth : 14/08/1977
Passport No : M 6487619
Validity of Passport : 19/02/2025
9 5
10 5
11 5
12 5
13 5
14 5
15 5
16 5
17 5
18 5
19 5
20 5
21 5
22 5
23 5
DEGREE ( CERTIFICATE WITH ATTESTED HRD & SAUDI EMBASSY) 24 5