Sign in

Instrument Technician Gas Processing

Chennai, Tamil Nadu, India
May 27, 2022

Contact this candidate




Email :


Skype no: 955*******

Mobile: 919*********


A suitable position in an instrumentation discipline preferably in Construction / Commissioning / Maintenance and Operation. I possess effective organizational skills and ability to supervise a team and develop the final output. EDUCATIONAL DETAILS:-

Technical Qualification : Diploma in Electronics & Communication Engg (1996-1999)

: Post Graduate Diploma in Chemical Process Instrumentation & Control (First class-2003)

Training Course : Industrial & Control Automation (DCS, PLC) MSME (Govt of India)

HEALTH & SAFETY COURSES: BOSIET, HUET, Sea Survival, Emergency First Aid, Fire Fighting & Self Rescue and H2S course, SCABA and Fire Extinguisher training PROFESSIONAL EXPERIENCE: 19 YEARS (Offshore & Onshore) Specialist in Instrumentation Installation / Commissioning/Shutdown/Operation especially in DCS, PLC, ESD, F&G Systems,Sub-system, Field Instruments, Rotating Equipment’s and Substation related to oil and gas(Upstream & Down stream) industries like Well head control panel(WHCP),CPF,gathering center, EPF, LNG plant-SRU,GasBooster stations, Water Treatment Plant and Offshore platforms. Preventive & corrective maintenance startup & shutdown specialist jobs for the upstream and downstream oil & gas Process, Petroleum refinery and platforms


Duration : Oct 2019 to Nov 2021

Employer : Petroleum Development Oman (PDO)

Green Field Solutions



Duration : Nov 2015 to Sep 2019

Employer : Kuwait Oil Company (NORTH KOC OIL FIELD PRODUCTION) ABJ Engineering & Contracting co W.L.L Kuwait

Position : SENIOR INSTRUMENT TECHNICIAN (MAINT/OP) Duration : Dec 2010 to May 2015 (OFFSHORE)

Employer : ADGAS LNG Plant (ABU DHABI) OPTIMA No: 858855 QCON Engineering & construction co (Abu Dhabi)


Duration : March 2004 to Nov 2010


(HAL Offshore Ltd)


Employer : Franklin Instruments & Erection Techs Pvt ltd, CPCL Chennai Position : INSTRUMENT TECHNICIAN (COMMISSIONING/MAINTENANCE) MY SKILLS:-

1.Execution the scheduled Construction,Pre-commissioning,commissioning as per ICAPS and maintenance on instrumentation and control systems, proactively identifying and resolving problems and minimizing downtime in safe manner and in compliance with Client and best practice Commissioning, Maintenance and shutdown Procedures as per SOP. 2. Initially, preparing procedures and engineering activities descriptions in preparation for Onshore & Offshore Projects and operations activities. 3. Provide technical support for front-end-development, cost estimation, construction, and startup for projects and changes packages.

4. Having good knowledge of integerated safety system of work with company HSE standards permit to work system (PTW).

5. Familiar with ICSS SAT, UCPs, Sub system and alarm management system. 6. Good knowledge of faults diagnosis of DCS, PLC, IPS and RTU. 7. Good exp. in Preparation of I/O List, Instrument Index, Plan layout, Control room & Control Equipment layout, Cable schedule and Interlock logic diagrams (ILD), Instrument Installation drawings, Interposing Relay Panel, P&IDs and etc. 8. Having well knowledge of National / International codes and Standards like BS/IEC/IEE, Hazardous area classification as per IEC and NEC.

9. Day to day planning, schedule and execution of preventive maintenance activities and moc jobs with fallow instruction as per work orders with MAXIMO and SAP system. 10. Spare parts receive from the store identifies for maintenance & corrective jobs as per the work order.

11. Good knowledge in Decommissioning and Commissioning for field Bus instruments with Delta-V Emerson, Foxboro IA and Honeywell experion. 12. Functional test of HIPPS (High Integrity Pressure Protection system) and Partial stroke checking for ESDVs using Valve link software

13. Good Experience in calibration and configuration of Level transmitter DP type, Guide wave Radar & Non-contact Radar type and Leveltrol displacer type and Capacitance type TX. 14. Experience in well head instruments maintenance with control monitoring (RTU) & troubleshooting & commissioning of Hydraulic Well head control panel (WHCP). 15. Installation, Commissioning and maintenance of Ultrasonic flow meter, turbine flow meter, magnetic flow meter and vortex flow meter

16. Perform Pre commissioning and commissioning of field Instruments for Loop check, function test, Cause & effect check

17. Erection, Installation, Commissioning, Testing, Loop checking and calibration of instruments in Crude Unit (CDU), Sulpher Recovery Unit (SRU). 18. Good knowledge of Zone system for Hazardous area classification. OFFSHORE Experience:

1. Responsible for instrumentation daily activities that include preventive, corrective maintenance, troubleshooting & repairing instruments and well head activities. 2. Preparation of PTW preventive, corrective as per work order in the SAP system. 3. Involved in SAT, Loop test, functional test, instruments inspection & verification. Commissioning and start-up activities.

4. Well Head Integrity test, functional test- low pressure & high pressure trip and under load trip electrical motor.

5. Troubleshooting with electrical team & installation of sea water lift pumps and electric generation and distribution.

6. Familiar with DCS, ESD and F&G system.

7. Interconnecting wiring of switch gear room and control room which is include various motor control pumps, power distribution of 24VDC, 110VDC & 240VAC etc. 8. Good knowledge of all instruments installation, loop test, functional test and cause & effect check related to process- Separator fuel gas skid, production water conditioning skid, Flash vessel, waste heat recovery unit,utility systems, Gas turbine. Condition Monitoring &Vibration:

1. Good experience in Vibration probe installation, loop checking and calibration using with Tk3 kit.

2. CMS 3300, 3500{Bently Nevada Vibration and Temperature controls panel} . 3. Good knowledge in communication protocol vibration panel with terminal server DCS and ESD system.

Field Instruments Experience:

1.Diagnostics &Troubleshooting of instruments, PT, LT,FT & TT transmitters, control valves and ESDV,SBDV, Volume Booster,SOV,Pressure regulator valve,limit switches, overhauling of control valves with Positioner (make-Fisher,ABB,Masonelian,Logix MD series)and Motor Operated Valve (rotork,Auma)

2.Installation & commissioning of thermocouples, RTD sensors, Displacer type level TX, Radar level TX, DP type level transmitter,Magnetic flow meter, Ultrasonic flow meter,,DP type flow meter loop checking & field communicator using testing equipment’s.(Make:Rosemount,E&H,Magnotrol,Masonelian,AMETEK Universal iv,Krohne) FIRE AND GAS INSTRUMENTS :

1.Good experienced in Fire & Gas detector’s, GDT,GDF, UVIR, Smoke detector andHeatDetectors, Flame Detectors fusible plugs system for Calibration, maintenance and commissioning activities of the complete System and cause & effect [Make: General Monitor, MillenniumII Emerson, Honeywell and Detronics]. 2. Familiar fire & gas system with Triconix and cause & effect. 3. Well experienced in fire suppression system and deluge system LIST OF SYSTEMS HANDLED:

GE Gas Turbine Mark-II Speedronic & MK Vle Control System Ruston Gas Turbine TA-1500{Woodward control system} Solar Gas Turbine CentaurT-4002{Relay logic Control system} Gas IC Engine-V type (Cooper Bessemer) FT-50{En-tronic PLC Control System} DCS Delta V Emerson, Foxboro I/A Series and Honeywell Experian Pks, TDC 3000X, ABB 800XA & Yokogawa CS 1000 &3000}

PLC {GE Fanuc, Allen Bradley Rockwell SLC 500, RS Logix5000, Control logix 5562, ics Triplex, Siemens S7 300 & 400}

Analog & Digital I/O Module {Rosemount-RS3, Foxboro-I/A, Honeywell & etc…} Foundation Field Bus and HART and SFC communication system Emergency Shutdown System (ESD) Hima Elop 11, Honeywell FSC, Schneider Triconix and Delta v SIS.

Anti-surge control system(CCC)

D.G. set & Turbine 6.2 MW, SGT 300 SIEMENS

Plant Operation & startup Assisting:-

1. Assisting with start-up activities for plant operations Co-Ordinate with Project People to Commissioning and testing of all Process instruments. Corrective, Preventive, Breakdown & Shutdown Maintenance of instruments in CPF, Gas processing & Booster Station. {Crude oil desalting plant, Condensate Recovery Units, Oil & Gas Separators & Scrubber, Inst.Air Compressor, Liquid Dehydration Units, Heaters, Fuel gas system, Gas turbine and Process Drain system}. 2. Well head control panels-WHCP (Hydraulic)

3. Crude Oil storage tanks (Wet, Treated crude oil) 4. Crude Export pump 6.6kv VSD (Siemens S7-400 PLC) 5. Condensate Recovery Unit-Gas compressor (CRU)

6. Water Injuction Deep Water Disposal pump 11kv

7. Effluent water Water booster pump 3.3kv & 6.6kv 8. Hp and LP flare system

9. Standby Generator Siemens Gas turbine SGT300 (6.2mw) 10. Chemical Injection pumps

11. LNG plant and SRU Sulpher Recovery Unit

12. Offshore platform process

Computer Knowledge :



Name : Jaganlal

Date of Birth : 20/04/1981

Marital Status : Married

Nationality : Indian

Language Known : English,Tamil, Hindi & Malayalam Current Location : India


Passport No. : V1825894

Date of Issue : 05.08.2021

Date of Expiry : 06.08.2031


I hereby declare that all statements made in the application are true and correct to the best of my knowledge and belief.

Thanking You

Yours Sincerely


Contact this candidate