Nureldin Alsubu

CONTACT DETAILS

Address: Jordan-Amman

Dahyat Alrasheed

Mobile: +962*********

Email: adpwq6@r.postjobfree.com

PERSONAL PARTICULAR:

Date of birth:

January, 1st, 1979

Nationality:

Jordanian.

Marital status:

Married, three kids

Language Proficiency

•English: Reading, Writing and speaking.

•Arabic (Mother Tongue)

Areas of Expertise

•Committed to safety and compliance

•Management of Change

•Project Management

•Reliability

•Performance monitoring

•Engineering &Installation

•Construction Management

• Site Development

• Quality Inspections & Audits

•Construction, Commissioning & Start-Up Methodologies

•Pre-Operational Verification& Functional Testing

•Preventive Maintenance

•Greenfield& Brownfield

• Field Engineering & Feasibility Study

• IEC, IEEE, NFPA 70E Engineering standards

• Project Planning

• Progress Monitoring & Review

• System & Package Completions Coordination

• QHSE

•FEED,EPCCM,EPCM, EPC, EPIC, PMC.

An additional area of experience includes:

• Team building and leadership skills

• Problem solving

• Positive communication

• Risk review

• Improvement projects for enhancing the reliability of plant

Computer Proficiency

•MS Office

•Modeling of power system using ETAP & simulation software

•CMMS: MP2,ERP,MAXIMO & SAP

•CAD/CAM,AutoCAD, MATLAB

• C# programming language

• Familiar with reliability software such as AWB (Availability Workbench)

Membership:

•Member of the MDEC panel .UAE.

•Member of Electrical transmission panel, UAE.

•Member of the Jordan Engineers Association / Electrical division.

•PMI member.

•Member of IEEE.

Profile: Solar CSP and PV expert

Lead Engineer: Acting Engineering and Contract Services Manager

An Electrical,Mechanical and Instrument professional engineer committed to safety and compliance with extensive background in construction (EPC and EPCM),performance modeling and monitoring,plant and assets reliability (during all phases of asset/plant life which has an impact on life-cycle cost starting from design phase/ procurement/storage and preservation/ installation/operation & maintenance),Quality Inspections & Audits, Commissioning & Start-Up Methodologies, Pre-Operational Verification & Functional Testing, operation,maintenance (Proactive, Preventive, Reactive(Corrective), Predictive (CdM)), engaged within Oil & Gas,Conventional and renewable Power Generation (Thermal power plant, GT,ST, Hydraulic, Bio-gas, Nuclear in addition to PV & CSP Solar power plants ), Water Treatment, WWTP and desulfurization and regeneration for Green and Brownfield projects for around 15+ years across Middle East in construction, commissioning, maintenance and operation, highly qualified organizations with added expertise in MOC (Management Of Change) Reliability, Warranty Management,Code of conduct, Occupational Health and Safety and rich mix of experience in field based project engineering and coordination, budget management, staff/contractor management and supervision, planning and quality control. Gained a reputation for solving complex problems in the field through technical experience and analytical skills to reach desired outcomes, and promoting enthused teams to safely and effectively manage engineering site works. Identification and management of asset reliability risks that could adversely affect business operations through loss elimination, risk management and life cycle asset management.

Development and implementation of effective engineering solutions to ensure Electrical & Process Safety and Equipment Integrity,Maintenance of Codes and Standards ISO, IEC, IEEE, NFPA and insure are up to date, being applied correctly and understood by relevant personnel for all electrical equipment, apparatus and associated instruments & control systems, Progress Monitoring & Review,

Ensured that all E & I pre-op activities are in accordance with relevant rules, codes, specifications, and standards under approved schedule to continuously keep electrical system running safely and efficiently. Awareness of site environmental action plan by ensuring compliance during area pre-op testing and ensuring adherence to company’s statutory regulations relating to health & safety.

I am a responsible & confident leader and a strong team player by example inspiring others to achieve goals and always seeking to drive improvement. Capable of making decisions in highly pressurized situations, always adding value to the organization and projects that I am working within. I have & currently do manage and lead multi-cultural teams ensuring that motivation and morale are always maintained throughout. Able to work on my own initiative & possess the ability to learn quickly and can communicate effectively with all levels & types of people with my broad spectrum of experience.

Education

Al Balqa’Applied University (Jordan).

M.Sc. in Mechatronics Engineering (Mechanical & Electrical)

Princess Sumaya University for Technology, Amman, Jordan

B.Sc in Electronics Engineering.(Electrical and instrument) 2003

Employment History

Lead Engineer: Acting Engineering and Contract Services Manager (Team of 3 engineers, 4 contract supervisors,69 contracts,more than +500 contractors)

7th November 2016 to till today

EGA - Al Taweela Refinery

world’s largest single-site aluminum smelter with 2.4M tonne/pa – 9,000 employees – $ 4.7B revenues,2700MW power generation capacity ST/GT/Combined Cycle /DG/Solar.

Contracts Management

1-Pre-Qualification 2- Preparation 3- Evaluation 4- Contract Award

5- Training & development 6- Monitoring Safety Performance 7- Close Contract Post Evaluation

Contract Evaluation based on the following criteria EHS, technical & commercial.

Led Task forces on Refinery Optimization program, and Contractor and process Safety.

Management, EGA/Masdar solar feasibility study (200 MW + 150 KWs)

Led the award process of 69 contracts for ATA refinery operation and maintenance by working on streams of work which include tender documents preparation, procurement optimization, technical and commercial evaluation, purchase requisitions, pre qualifications, final bidders list, award recommendation, contractor’s safety management, vendor setup and contract administration.

Supported the Contracts Project Manager in effective decision making and acting on behalf of him as per DoA.

Analyzed main contractor change order proposals for accuracy of quantities, conformance with contract documents and subcontractor scope of work.

Operations Budget Optimization

Achieved procurement optimization impact on Business case NPV of ~ $134m

Commercial Negotiations

Achieved 37% reduction on the CapEx and OpEx of 69 contracts (155 m$)

Contractors Safety & Refinery Process Safety management

Deployed EGA wide and Refinery specific Contractor Safety Management Framework.

Lead and manage contractor safety management program and contract administration training, process, derivable and KPI in addition to all related aspects.

Endorse safety culture and process safety management program.

Follow all project activities from construction, commissioning, maintenance and operation. Support Health, Safety and Environmental standards throughout the company and adherence to company all policies and procedures and ensure that safety rules are respected and Convey Health, Safety and Environmental regulations to/and from project team by conducting daily safety share & TBT in addition to follow up its implementation.

Develops and implements integrity engineering policies, systems, processes, procedures and controls covering all areas of the Asset Integrity so that all relevant procedural/legislative requirements are fulfilled.

Participated in the review of asset criticality analysis for all HV equipment.

Ensures compliance to all relevant safety, quality and environmental management policies

Develop, implement and support all equipment maintenance strategies and plans for regular and preventive maintenance based on OEM recommendations, codes & international Engineering Standards (NFPA, IEEE, IEC etc.) for Power and distribution Transformers, Circuit Breakers, Switch gears, Harmonic filters, Capacitor bank, HV Cables, UPS, Battery charger for safe O&M & ensures compliance to all relevant safety, quality and environmental management policies.

Develop and implements high voltage switching programs and associated competency assessments for safe HV switching execution

Coordinate with ongoing project and construction meetings, walk downs, FAT, SAT, Site Quality inspections, Monitoring the all construction/commissioning activities performing by the team.

Support the supply team and the planning team to identify the required and recommended spares quantities and to set the minimum, maximum and reorder based on HV team experience and OEM recommendations within the allocated budget.

Participating in review for documents generated by HV team and assists Projects and Maintenance teams with technical support regarding any technical cases.

Participated and witnessed the Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) as required for HV Electrical systems.

Participated in the review and develop the EGA Electrical Safety Code of Practice first draft.

Ensures Engineering standards that apply to ATA SMPs, SOPs and management procedures are accurate, up to date, being applied correctly and understood by HV team (O&M) & in line with relevant regulatory, statutory and Internationalstandards.

Participating in review all project deliverable, documents, studies, proposals, drawings, datasheets, O&M manuals, specifications, compliance...etc. Related to electrical systems and raise any up normality to the concern party.

Follow up with project team to check the high voltage system progress and ongoing activities and when the commissioning activates can starts.

Participating in preparation of the third party agreements and service contracts and the scope of work for the HV systems.

Review all electrical procedure & specification documents and support the instrument team if required.

Head of Electrical, Instrument & Control Unit (E&IC Lead Engineer) and Acting maintenance manager role for lagest CSP Solar power plant in MENA.

July 2012- October 2016

MASDAR, SHAMS POWER CO, O&M, UAE –Abu Dhabi

Confirm the total E&I&C quality, safety and progress, Leading the electrical, instrument and control teams during the construction, pre-commissioning and commissioning phases to support all successive construction and commissioning activities in addition to prepare for the O&M phase & Ensure compliance to all rules, regulations and policies. Focused on maintaining a ‘zero harm’ workplace, and possess a detailed understanding of HSE related policies and legislation. Ensure strict compliance with quality, environment plans, all aspects of OH&S and HSE policies and procedures.

Ensure that safety rules are respected and Convey Health, Safety and Environmental regulations to E&I&C team and follow up its implementation. Safety Leadership, Acting as a role model to promote the highest standards in HSSE culture in the project community and maintaining the Corporate Safety Procedure & requirement.

Performance modeling and monitoring for the power plant,power plant and assets Reliability (MAN Steam Turbine, Booster heaters, Motors, Pumps, Valves, Compressors, Switchgears etc. (all phases of asset/plant which has an impact on life-cycle cost starting from design phase/ procurement/storage and preservation/ installation/operation & maintenance),Quality Inspections & Audits, Commissioning & Start-Up Methodologies

Shutdown planning/management, contract negotiation, Scope of Work development and tender evaluation, capital project management from feasibility through implementation, tracking and forecasting capital expenditure and provision of project updates to management.

Reviewing the calculations; Power system studies; Equipment specification & data sheets; Lighting & Earthing Block Diagrams, Bus-bar Datasheets, Electrical schematics & Cable schedules; Installation Specifications & drawings; Protection settings & Coordination studies; Evaluation of life cycle costs; Feed studies for LV, MV & HV.

Exceptional stakeholder engagement / management skills with proven ability to develop and maintain productive and long term relationships with internal and external stakeholders at all levels. Experienced in communicating technical information and producing accurate written reports.

Ensures Engineering standards that apply to plant (both SHAMS and industry standards) are accurate, up to date, being applied correctly and understood by relevant personnel

Encompassed the design & specifications of electrical systems and conducted the Pre-op tests with detailed technical knowledge of LV, MV & HV Switchgears, Transformers, Power Generators, Distribution Boards, Motors & Pumps, Electrical power & protection systems, VSDs & UPSs, System analysis utilizing ETAP software, Electrical control and monitoring systems.

Prepared and followed-up the Deficiency & Punch List.

Providing technical support to the preparation of Field Change Requests (FCR), Technical Queries (TQ), Engineering Queries (EQ) and Change Orders.

Implement, review and facilitate change control (management of change) for the upgrade and modifications to the plant and also carry out plant trials prior to complete/support change management. Review, update and approve engineering drawings and engineering standards and implement change management.

Directing the Quality, Construction & Commissioning project strategy.

Preparing the Commissioning Dossiers & Livening up Notifications for the facilities.

Lead the Mechanical Completion walk downs.

Preparing the Deliverable List (Engineering to Construction to Commissioning to Operation).

Organizing the preparation of the Technical Document Register (TDR).

Responsible for technical matters, procedures, construction & commissioning deliverables, schedule compliance and man hour control by providing input to project execution plans and schedules for the project.

Responsible to advise the technical issues to Project management.

Reviewing contractor’s technical submittals and monitoring contractor’s quality control Program.

Ensuring the E & I construction & commissioning test activities are properly organized, scheduled and conducted in a structured & safe manner by complying with the agreed performance parameters indicated in the design and specifications.

Check and review all commissioning Documents (Procedure, Instruction and Check lists).

Prepare E&I&C commissioning tools and their quantities which used during commissioning tests.

Prepare E&I&C commissioning work plan and distribute systems and manpower to achieve the milestone dates without delay.

Meet with commissioning staff to discuss commissioning process needs and progress.

Make interviews for E&I&C commissioning engineers.

Estimate the manpower needed for E&I&C commissioning staff.

Estimate the time needed for E&I&C commissioning activities.

Follow up with construction staff to check the progress to check when the E&I&C commissioning activate can starts.

Explain the work plan of E&I&C commissioning (hot loop check, functional check, and mechanical and electrical interlock check,….etc.) and arrange all documents and sheets related to these tests.

Check the FAT & SAT test procedure from the vendor and put notes. And witnessing the Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) as required.

Check the status of ECC (Erection Clearance Certificate) to enable commissioning staff to start their work.

Follow up commissioning engineers and technicians during hot loop tests and functional tests and make sure that tests are performs on the best way.

Prepare the commissioning progress report daily to top management.

Arrange with vendors and provide help and support for them to achieve their work.

My rules during the preparations for the O&M phase :-

Recruitments of the E&I&C staff and be sure of their capability to handle such tasks in a safe way. And prepare the adequate training and safety induction plan in cooperation with HSE department.

Preparation of the third party agreements and service contract and the scope of work for the main and Aux. systems in addition to all sub systems which includes the soft and hard FM contracts(HVAC, Elevator, Fire alarm and firefighting, BMS etc.).

Leading reviews of process and equipment failures using structured problem solving techniques such 5 WHYS….etc.

Continuous Improvement – Analysis of equipment trends, review of scheduled maintenance activities and frequency, and development of metrics to determine of equipment life. Highly analytical with an innate ability to promptly identify issues and formulate effective solutions.

Prepare the Electrical and IC workshops and procurement of all required tools & special Kits such as non-sparking tools (ATEX), Insulated and MV/HV Kits, instrument calibration bench, condition monitoring systems in addition to the machinery workshops for Mechanical, electrical and IC.

Preparation of the maintenance procedure and help other departments to prepare the operation and safety procedure.

Develops and implements key equipment inspection and monitoring procedures based on required equipment engineering codes in line with national and international Engineering Standards

Setup the CMMS and customized the flowcharts, reports and KPI to be more helpful and useful and to match the view and the vision of the maintenance management.

Performs other related incident investigations, auditing and risk assessments

Prepare and establish annual and preventive maintenance schedules which is extracted from the international standards, OEM, staff experience and lessons learned of the previous projects.

Before the O&M phase, we have supported the project team in the following tasks Inspection, Testing, Commissioning and issuing of the OIDs report .also correct and improve the safety, reliability & functionality of the project drawing, process and the most important part is the safety of the people and the machines.

Also we did the same after the PCOD and during the warranty period of the plant.

My rules during the O&M phase as the following:-

Continuous Improvement – Analysis of equipment trends, review of scheduled maintenance activities and frequency, and development of metrics to determine of equipment life. Highly analytical with an innate ability to promptly identify issues and formulate effective solutions.

Asset reliability and maintenance of electrical/instrument installations such as switchgear and protection equipment, motors, VSD, MCCs, UPS, Instruments (steam, water and chemical: flow, pressure and level including liquid analyzers and emissions analyzers CEMS), substations, power distribution system and power station.

Ensure that safety rules are respected and Convey Health, Safety and Environmental regulations to E&I&C team and follow up its implementation.

Implement, review and facilitate change control (management of change) for the upgrade and modifications to the plant and also carry out plant trials prior to complete/support change management. Review, update and approve engineering drawings and engineering standards and implement change management with the engineering team .

Drive meetings with E&I&C team in a daily basis to discuss all the plant related technical issues and analysis failures using root cause analysis reports, results and indicators in order to propose, prioritize and carry out action plans which includes the risk assessment, method statement,LOTO and PTW .and coordinate with,HSE and operations team for the required isolation,date & time.

Prepare the scope of work for any new service,project or modification(MOC), estimate the cost & man hour/power, review the subcontractor's proposals (Plan, Documents, Drawings, Method statement, LOTO etc.) and coordinate with all parties so that the activities can be accomplished in safe timely and cost effective manner. follow up the project by supervise the site condition .regular meeting with vendor/the performing party to discuss the needs, progress and that all documents are updated,report to the management .

Drive meetings with other departments (HR, Engineering, HSE, Procurement, etc.) in a daily and weekly basis .

Manage E&I&C Department purchases and validate the stock (Min/Re-Order)levels for spare parts and consumables.

Ensure that career and appraisal interviews are carried out properly.

Ensure that the document and the CMMS is kept up to date.

Ensure that my staff adequately trained, equipped and motivate so that the activities can be accomplished in safe timely and cost effective manner.

Reviews and prepares technical reports and attends incident investigations involving major equipment failure in order to provide technical expertise and to minimize the repetition of its occurrence,provide technical support for troubleshooting of process & control instrument (flow meters, pressure,temperature,analyzers and level, etc.), PLCs, SCADA and DCS in addition to all electrical works.

Conduct Safety toolbox talk and discuses all staff related issue in a weekly basis.

Review existing maintenance processes, procedures, SMP, SOP in yearly basis or if required.

Works closely with Operation and Maintenance teams when equipment performance issues are escalated for further detailed engineering investigations. Identify gaps and propose actions to close gaps.

Ensured that all I&C pre-op activities are in accordance with relevant rules, codes, specifications, and standards under approved schedule to continuously keep the project running safely and efficiently.

Provided technical advice, guidance & recommendations for projects and modification of existing assets carried out using the Management of Change (MOC) process.

E&I Engineer

August 2010 - July 2012

Kharafi National Co., UAE – Abu Dhabi (Power plants/WTP/Desulfurization Gas plant/ Chlorine Plant/WWTP/Oil Refinery)

Asset reliability and maintenance of electrical/instrument installations such as switchgear and protection equipment, motors, VSD, MCCs, UPS, Instruments (steam, water and chemical: flow, pressure and level including liquid analyzers and emissions analyzers CEMS), substations, power distribution system and power station.

Awareness of site environmental action plan by ensuring compliance during area pre-op testing and ensuring adherence to company’s statutory regulations relating to health & safety. Ensure compliance to all rules, regulations and policies of KN in particular and UAE in general.

Provided technical advice, guidance & recommendations for projects and modification of existing assets carried out using the Management of Change (MOC) process.

Develop, deploy, and continuously improve maintenance work management strategies for power generation and refinery distribution electrical, instrument and critical mechanical assets.

Identification and management of asset reliability risks that could adversely affect business operations through loss elimination, risk management and life cycle asset management.

Prepared and followed-up the Deficiency & Punch List.

Drive internal meetings among project management (EPC) and external meetings with Owner's Engineer and O&M team in a daily and weekly basis also with third parties like Health& Safety, Environment, QA/QC, Operation, Financial and Administration departments to update the department’s needs and requirements. And to ensure that the technical and build contractors are adhering sufficiently to the project specification.

Testing, pre-Commissioning, Commissioning, Startup activities and preparation of the start-up of the plants and projects From EPC till O&M.

Managing, planning and implementing pre-Commissioning, commissioning, modifications, new installations through (CMMS) program.

Ensure that internal rules are respected and that the available means are utilized (Hot work permits, operation procedures, health and safety prevention plans, etc.).

Analyze failures using root cause analysis reports, results and indicators in order to propose, prioritize and carry out action plans.

Ensure that career and appraisal interviews are carried out properly.

Manage Department purchases and validate the stock levels for spare parts and consumables.

Ensure that the document base is kept up to date.

Ensure that my staff adequately trained, equipped

and motivate so that the pre-Commissioning, commissioning activities can be accomplished in safe timely and cost effective manner.

Convey Health, Safety and Environmental regulations to maintenance team and follow up its implementation

Provide technical support for troubleshooting of process & control instrument (flow meters, pressure, temperature, analyzers and level, etc.), PLCs and SCADA in addition to electrical, mechanical works.

System. Analyze failures, results and indicators in order to propose, prioritize and carry out action plans. Reviewed, updated and implemented the detailed pre-operational verification plans for each system includes engineering support, scoping, testing sequences and specific test procedures to enhance equipment efficiency.

Managed the Pre-Op activities with pre-planned schedule & with project technical documents as required.

Carried out the Pre-op tests and witnessed the activities involving calibration, functional tests on Temperature, Pressure and Level instruments, Flow switches, Control valves, PSV, MOV, XCV, SOV, Shutdown valves (EIV, ESV), On/Off valves, Safety relief valves, Vibrator & Actuator switches, etc.

Critical plant condition assessment, asset integrity audit.

Carried out the Pre-Operational Verification & Commissioning in electrical systems & equipment including...

Performed field consulting services as required.

Ensured that all I&C pre-op activities are in accordance with relevant rules, codes, specifications, and standards under approved schedule to continuously keep the project running safely and efficiently.

Provided technical advice, guidance & recommendations for projects and modification of existing assets carried out using the Management of Change (MOC) process.

Awareness of site environmental action plan by ensuring compliance during area pre-op testing and ensuring adherence to company’s statutory regulations relating to health & safety.

Coordinated with colleagues, other discipline & departments to improve the plans & schedule for project management.

Conducted Pre-op testing activities of electrical equipment in assigned areas under the direction of the Pre-Op Area Lead.

Instrumentation & Control Section Head

October 2007 - August 2010

As-Samra Plant, Zarqa-Jordan (A Degremont “SUEZ”- Morganti “CCC” Joint Venture) Amman-Jordan

Asset reliability and maintenance of electrical/instrument installations such as switchgear and protection equipment, motors, VSD, MCCs, UPS, Instruments (steam, water and chemical: flow, pressure and level including liquid analyzers and emissions analyzers CEMS), substations, power distribution system and power station.

Ensure compliance to all rules, regulations and policies of CCC in particular and Jordan in general

Testing, pre-Commissioning, Commissioning, Start-up activities and preparation of the start-up of the plant in the EPC phase.

Direct and supervise all day-to-day maintenance related jobs of the Instrumentation section, pertaining to all station, measurement & instrumentation systems for As Samra and Power Generation using Hydraulic Turbine and Biogas Generators instruments.

Condition monitoring of HV/LV switchgear, motors, transformers, instruments and other electrical equipment

Plans and supervises the activities of the instrumentation’s team which covering the areas of process field Instruments.

Prepare and evaluate contract bids of equipment’s& spare parts purchases.

Review and recommends the budgetary requirements of the Instrumentation section.

Support diverse types of process & control Instruments: Electromagnetic & Ultrasonic flow meters, Pressure & Level transmitters, chlorination and systems (Installation, Operation, programming and Configuration, Troubleshooting).

Logistic support and fault finding for the Automation, Mechanical and Electrical sections.

Maintenance engineer

May 2005 - October 2007

Central Electricity Generating Company (CEGCO)

Asset reliability and maintenance of electrical/instrument installations such as switchgear and protection equipment, motors, VSD, MCCs, UPS, Instruments (steam, water and chemical: flow, pressure and level including liquid analyzers and emissions analyzers CEMS), substations, power distribution system and power station.

Improvement projects for enhancing the reliability of plant and Familiar with reliability software such as AWB (Availability Workbench).

Leading team consist of 35 technicians and supervisors.

Carry out preventive, corrective and predictive maintenance. Provide technical problems solving and troubleshooting for diesel, steam and gas turbine.

Managed maintenance, repair and troubleshooting of power plant equipment (instrument & control side) including (boilers, turbines, coprocessors, pumps, fans…etc.)

Testing the reliability of equipment (boilers, turbines) via interlock test standard procedure.

Decrease equipment failures and spare parts consumption by the application of corrective and preventive maintenance.

Prepared and managed an annual spare parts lists and tenders

Modified the control system and the engineering drawings for new installed equipment and system to be compatible with plant equipment

Calibrated instrumentations including (pressure, temperature, flow, level wise) gauges, transmitters control valves actuators and petitioners.

Contributing in

Contact this candidate