SHOBIN JOBSON
Instrument and Control Engineer
SUMMARY
Mobile (India): +91-989*******
Mobile (Iraq): +964 781*******
Email: adplo1@r.postjobfree.com
Whatsapp: +91-989*******
Skype Id: shobin61
Linkedin: Shobinjobson
Experience : 10 Years
ABOUT ME
Highly skilled and dedicated instrument and control engineer with accurate and precise attention to very minute details. Able to work effectively both independently and as a part of a large team. Applying extensive knowledge of sustainability principles.
OBJECTIVE
To be an integral part of an organization where, I can utilize my skills and abilities towards the achievement of the goals of the organization.
PASSPORT DETAILS
PASSPORT NO: Z4721485
DATE OF BIRTH: 24-02-1988
NATIONALITY: Indian
MARITAL STATUS: Married
LANGUAGE
COMMUNICATION
ORGANIZATION
TEAM PLAYER
CREATIVITY
SKILLS Have gained 10 Years of experience in the field of Instrumentation & Control. Proficient in Operation and Maintenance of Dual Fuel-Gas turbine power plants and Gas compressors. Lead several Combustion chamber Inspections, Hot Gas Path Inspections in GE Frame 6 turbines. Proficient in Cameron Gas compressors and Waukesha driven Ariel Gas compressors
CORE COMPETENCIES
Proficient in the maintenance of Alstom Turbines GT13E2 x4 (720MW)
Worked as a Lead Instrumentation and control Engineer in Hot Gas path inspection and combustion chamber Inspections in GE Frame VI MS6001B x 3 (42MW) Gas Turbines
Experience in the tuning of Dry Low NOx (DLN) GE Frame VI Gas turbines
Cameron Fuel Gas compressors(Model 644CH) Revamping and overhauling
Handled all instruments in Fuel Gas Treatment Facility
Expert in all type of Instrumentation documents – Logical/Wiring Diagrams, I/O list, Cause and Effect Matrix, P&ID’s etc
Proficient in control systems, EMERSON “ DELTAV”(Digital automation system), in checking all instrument details, trends, graphs, set points, modifying instrument data, checking ESD matrix and all logic.
Experience in firefighting systems.DET-TRONICS,Eagle Quantum Premier Panel System, in field side, panel side and DCS side, troubleshooting and maintenance of firefighting systems like smoke detectors, flame detectors and heat detectors.
Experience in AMS (Asset Management System) system, experience in checking all instruments via AMS, modify data, correction, troubleshooting and configuring instrument settings.
EDUCATION&TECHNICAL COURSES
Bachelor’s degree in Applied Electronics and Instrumentation Engineering – 2009 (B.Tech)
Calicut University, Kerala, India
Instrumentation maintenance and control system course at FACT Kerala (Fertilizers and chemicals Travancore Limited)
English Proficiency-International English Language Testing System IELTS- Score Reading – 9, Listening – 8,Writing – 7, Speaking – 6.5
Validity - 24th October 2022
PROFESSIONAL EXPERIENCE
Professional Experience
No
Organization
Client
Designation
Type of project
Rotation
Country of work
Duration
Total years
1
SPM Oil and Gas, A caterpillar Company
ENI, Italy
Instrument and Control Engineer
Operation and Maintenance of 4 Alstom GT13E2 Gas turbine Power plant and BOP
8 Weeks On /
8 Weeks Off
Iraq
March 2021 to Present
Ongoing
2
Weir Oil and Gas, UK
ENI, Italy
Instrument and Control Engineer
Maintenance of 30 Gas compressors
28days On /
28 days Off
Iraq
Sept 2019 to July 2020
10 Months
3
Weir Oil and Gas, UK
Lukoil, Russia
Instrument Engineer
Operation and Maintenance of 3 GE Gas turbine power plant and BOP
28days On /
28 days Off
Iraq
July 2017 to August 2019
2 Years and 1Month
4
Bonatti SPA,
Italy
Lukoil, Russia
Instrument Engineer
Operation and Maintenance of 3 GE Gas turbine power plant and BOP
28days On /
28 days Off
Iraq
July 2014 to July 2017
3 Years
5
Microtech Engineers and contractors, India
TNEB, India
Instrument Engineer
Construction of power plant
5days On /
2 days Off
India
Aug 2009 to May 2013
4 Years
1)ORGANISATION: SPM Oil and Gas, A Caterpillar Company
SPM Oil & Gas provides superior products and service solutions to Oil & Gas customers in upstream, production, transportation, refining and related industries.
CLIENT: Eni, Italy
Eni S.p.a. is an Italian multinational oil and gas company headquartered in Rome. Considered one of the global super majors, it has operations in 79 countries, and is currently world's 11th largest industrial company with a market capitalization of 68 billion Euros, as of August 14, 2013.
DESIGNATION: Maintenance Instrument & Control Engineer
PROJECT: Operation and Maintenance of Alstom Turbines GT13E2 and BOP
PLACE OF WORK: Zubair, Basra, Iraq
PERIOD: March 2021 to Present
Rotation: 8 Weeks On/8 Weeks Off
Responsibilities:
Responsible for supervision & monitoring of all instrument operation and maintenance activities in Gas turbine power plant, Fuel gas treatment facilities
Calibrating all kind of instruments (Lab/Field)
Responsible for Fire and Gas Detection system
Responsible for process and utility system maintenance
Performing Preventive, Corrective &predictive work orders as per the CMMS requirements
Installation and modification of new instruments and configuring software (field side) of all instruments
Represent instrumentation department during client meetings in Troubleshooting, Technical,and management meetings
Instrument warehouse/spare parts management
Knowledge of documentation jobs like Preparation of technical reports for all instruments, Tools preparations for the upcoming projects, Exit pass preparations etc.
2 Year Spare parts preparation and Supply chain Co-ordination
2)ORGANISATION: Weir Oil and Gas, United Kingdom
Established in Scotland over 140 years ago, we are now a global business offering a wide range of solutions to the minerals, power, industrial, oil and gas markets.
CLIENT: Eni, Italy
Eni S.p.a. is an Italian multinational oil and gas company headquartered in Rome. Considered one of the global super majors, it has operations in 79 countries, and is currently world's 11th largest industrial company with a market capitalization of 68 billion Euros, as of August 14, 2013.
DESIGNATION: Maintenance Instrument & Control Engineer
PROJECT: Maintenance of 30 Waukesha (GE) Gas compressor
PLACE OF WORK: Zubair, Basra, Iraq
PERIOD: Sept 2019 to July 2020
Rotation: 28Days On/28Days Off
Responsibilities:
Responsible for supervision & monitoring of all instrument maintenance activities in 30 Waukesha Engine driven Ariel Gas compressors(Waukesha/Ariel HP 5794GSI,LP 7400GSI)
Performed 8000,16000,24000 running hour inspection for Low pressure and high pressure Gas compressors
Modification of condensation system in scrubbers, Online and Offline troubleshooting
With operation team modify/improve the process by tuning the process parameters
Execute Corrective, Preventive and Predictive maintenance Work orders
Issuing technical reports to client
Was involved in pre-tender meetings, Site inspection and scope of work determination. Provide technical evaluation of new projects to the company prior to the commercial tender.
Attended kick-off meetings
3)ORGANISATION: Weir Oil and Gas, United Kingdom
Established in Scotland over 140 years ago, we are now a global business offering a wide range of solutions to the minerals, power, industrial, oil and gas markets.
CLIENT: Lukoil, Russia
LUKOIL is a major international vertically-integrated oil & gas company, accounting for 2.1% of global output of crude oil. 3rd largest privately owned oil & Gas Company in the world by oil production.
DESIGNATION: Operation, Maintenance Instrument & Control Engineer
PROJECT: Operation and Maintenance of Gas Turbine Power Plant (Dual Fuel)
PLACE OF WORK: West Qurna 2, Basra, Iraq
PERIOD: July 2017 to August 2019(2Years and 1Month)
Rotation: 28Days On/28Days Off
Responsibilities:
Worked as an Acting project manager in several occasions during the course of employment
Was involved in the technical evaluation team prior to the commercial offer for new projects or contracts
Responsible for supervision & monitoring of all instrument operation and maintenance activities in Gas turbine power plant, Gas compressors and Fuel gas treatment facilities
Calibrating all kind of instruments (Lab/Field)
Performing Preventive, Corrective &predictive work orders as per the SAP requirements
Installation and modification of new instruments and configuring software (field side) of all instruments
Represent instrumentation department during client meetings in Troubleshooting, Technical,and management meetings
Instrument warehouse/spare parts management
Knowledge of documentation jobs like Preparation of technical reports for all instruments, Tools preparations for the upcoming projects, Exit pass preparations etc.
Major Achievements:
Successfully completed hot gas path Inspection of Frame VI GE Gas Turbines
Successfully completed combustion chamber Inspection of Frame VI GE Gas Turbines
Successfully completed major overhauling of Cameron Gas compressors
Involved in major modification works and Root cause Analysis team
Worked as a lead instrument & Control engineer for Dry Low NOx (DLN) Tuning of GE Frame VI Gas turbines
Awards:
Won Best behavior observation award from Client Year 2018
I was a nominee for the CEO Recognition Award like Safety Leadership Award and Hazard Identification and Solution Award on Jan 2018 by our Project Managers.
Certificate of appreciation for the successful completion of HGPI for gas turbines
Appreciation certificate for the successful completion of Pipeline revamping/overhauling of Cameron Gas compressors
4)ORGANISATION: Bonatti .S.P.A, Italy
International General Contractor which provides Engineering, Procurement, Construction and Operation & Maintenance Services to the Oil & Gas and Power Industry.
CLIENT: Lukoil, Russia
Major international vertically-integrated oil & gas companies, accounting for 2.1% of global output of crude oil.
DESIGNATION: Operation, Maintenance Instrument& Control Engineer PROJECT: Operation and Maintenance of Gas Turbine Power Plant (Dual Fuel)
PLACE OF WORK: West Qurna 2, Basra, Iraq
PERIOD: July 2014 to July 2017 (3 Years)
Rotation: 30Days On/30Days Off
Responsibilities:
Responsible for operation and maintenance of all instrumentation in power plant
Experienced in Fire and Gas system, Modification of instruments as per GE requirement,
Experience in Control systems such as Delta V, Mark VI, ABB systems, AMS, ESD control logic system and HMI
Experience in Water treatment plant HMI, and vast variety of field instruments
Well experienced in all type of instrument testing equipment’s
Involved in commissioning troubleshooting issues
Represented instrument team in Client meetings
Good knowledge in preparing tools and Equipment’s for new projects as per the requirements.
Major Achievements:
Successfully completed combustion chamber Inspection of Frame VI GE Gas Turbines
Successfully completed major overhauling of Cameron Gas compressors
Involved in major modification works and Root cause Analysis team
Awards:
Won Best behavior observation award from Client Year 2017
Won Best behavior observation award from Client Year 2016
5)ORGANIZATION:MICROTEC ENGINEERS AND CONTRACTORS, India
DESIGNATION: Construction Asst Instrumentation Engineer
PROJECT: Construction and erection of power plant 600MW
PERIOD: Aug 2009 to May 2013(4Years)
Rotation: 5Days On/2Days Off
Responsibilities:
Cable Laying, Cable termination, loop test, Instrument erection, Pre-commissioning and commissioning, Start-up
Identifying problems and shortcomings with existing systems.
Producing or assisting in the production of all tests and commissioning documentation. Undertaking testing and commissioning activities in line with the specified site requirements.
Ensuring the safe testing and commissioning of completed installations to achieve the necessary plant performance in accordance with project program requirements.
DECLARATION
I hereby acknowledge that all the information given above is true to the best of my knowledge and belief.
References and certificates – Available upon Request
Shobin Jobson
ENGLISH(IELTS)
MALAYALAM
HINDI
TAMIL
R=9
L=8
W=7
S=6.5