RESUME OF KEY PERSONNEL

NAME: C.LOGANATHAN

Photo

POSITION: Piping & Mechanical Supervisor

DATE OF BIRTH: 29-Dec-1979

NATIONALITY: Indian

CONTACT: adl047@r.postjobfree.com / +91-958*******

EDUCATION (DEGREE / YEAR / SPECIALIZATION / LOCATION)

Diploma / Mechanical Engineering / India B-Tech / Mechanical Engineering / India

NAME OF COMPANIES ASSOCIATED (COMPANY / YEARS)

GS Construction Arabia Co. Ltd (GSCA) / 2020.01 ~ 2020.03

GS Engineeeing & Construction Corp. (GS E&C) / 2013.04 ~ 2019.07 Intertek India Pvt Ltd / 2011.03 ~ 2012.12

Power Mech India Ltd / 2010.05 ~ 2011.02 Nasser S Al Hajri Co Ltd / 2008.02 ~ 2010.04 Fenner (India) Ltd / 2004.05 ~ 2008.02

Cross Country Pipelines / 2001.07 ~ 2004.04

LICENSES & REGISTRATION (CLASS / YEAR DISCIPLINE)

ASNT Level II in Radiographic Testing ASNT Level II in Ultrasonic Testing

ASNT Level II in Magnetic Particle Testing ASNT Level II in Penetrate Testing

FLUENCY / ABILITY IN THE ENGLISH LANGUAGE

Proficient

AREAS OF SPECIALIZATION

-Mechanical, Piping & NDT Inspection

-Field Quality Management

EXPERIENCE AND QUALIFICATION

2020.01 ~ 2020.03 Mechanical Supervisor / Inspector / GS Construction Arabia Co. Ltd (GSCA)

PRC 2020 Turnaround Project / Rabigh Refining & Petrochemical Company (PRC) / Rabigh, KSA

Project Description: Turnaround & Maintenance of EIS & Non-EIS Package

2018.05 ~ 2019.07 QC Inspector / GS E&C – JGSK JV

Clean Fuels Project / KNPC / Kuwait

Project Description: Brownfield / Revamping / Partial Shutdown of Plant

2016.08 ~ 2018.04 QC Inspector / GS E&C – HDGSK JV

RESUME OF KEY PERSONNEL

Karbala Refinery Project / State Oil Company (SCOP) / Iraq

2014.04 ~ 2015.09 QC Inspector / GS E&C

UGCC Petrochemical Complex Project / Uz-Kor Gas Chemical LLC / Uzbekistan

2014.04 ~ 2015.09 NDT Inspector / GS E&C

RRE 2 Project / ADNOC Refining (TAKREER) / UAE

2011.03 ~ 2012.12 NDT / Piping Inspector / Intertek India Pvt Ltd

Korba West Power Company Ltd 1 X 600 MW) Project / Bharat Heavy Electricals (BHEL) / India

2010.05 ~ 2011.02 QAQC Inspection Engineer – PWHT, PMI & NDT / Power Mech India Ltd Mahatma Gandhi Thermal Power Plant Project / Tiejuen / India

2008.02 ~ 2010.04 QAQC Inspector / Nasser S Al Hajri Co Ltd

SRU Unit (Train 6&7) Project / Flour,Chiyoda Technip Joint Venture (CTJV) – Ras Gas / Qatar

2004.05 ~ 2008.02 QAQC Inspector / Fenner (India) Ltd

BHEL/IBR/ILYODS / India

2001.07 ~ 2004.04 QAQC NDT Inspector / Cross Country Pipelines

ONGC & Gail Project / Mecon Consultant / India ROLES & RESPONSIBILITIES:

1) Static Equipment

Heat Exchangers: Maintenance of static equipment like different types of exchangers. Cleaning of shell and tube by chemical and hydro jetting. Knowledge about different types of test like 1.Shell Test 2.Tube Test.

Column: Isolation, opening, cleaning, inspection, removal, replacement of trays, tray segments and accessories of the following trays.Valve trays, bubble cap trays, sleeve trays, chimney trays, down comers, distributors.

Vessels: Knockout drum, deareators, absorbers, proper positive isolation, I.G.purging, Air purging, opening manway. DP Test of internal welded surface area. Demister pad replacement & cleaning, internal cleaning of vessel & boxing-up

Valve Maintenance: Gland Replacement, stem replacement, valve sheet lining by diamond cut paste.

RESUME OF KEY PERSONNEL

2)Reviews and Witness for UT, MPI, PT, PMI &HARDNESS TESTING.

3)Prepare test package according to test block provided by Client.

4)Review of all piping test packages.

5)Assigning Test Pack numbering

6)Confirm test medium is correct according to the line list and flushing method is correct

7)Confirm design pressure and test pressure is correct according to line list and within the allowable pressure for the pipe specification.

8)Confirm filling points, venting points, and drains are acceptable.

9)Confirm test boundaries are reasonable - evaluate exclusion zones.

10)Confirm valves, instruments, etc. that need to be removed are identified.

11)Confirm pressure gauge and relief valve locations.

12)Confirm boundary limits of blowing packages are achievable.

13)Submit the test package for Client review and approval.

14)Follow up with Client on test package approval.

15)Review the test package status once the punch, punch kill activities and release for HT if punch is cleared for HT.

16)Update the test package status.

17)Reviews of PWHT Charts &Reports, Interpretation of radiographs

18)Verifying summary and documentation control and ensure all the inspection to be according to ITP. To assist NDT personals and NDT requirements.

19)Pre-welding and weld joint fit-up inspection, In- process welding inspection.

20)Percentage coverage of NDE as per applicable standard (by line wise, Drawing wise and welder wise).

21)Verification, Daily visual inspection of storage and handling. Welding equipment calibration verification

22)Materials receiving inspection of piping materials, structural materials and welding Electrode and filler materials.

23)Perform line checking/prepare and check official test pack prior to release for hydro testing by ensuring that all welding inspection and NDT activities affecting the quality of welds contained in each piping spools of an isometric have been completed and accepted.

24)Preparation of punch list for the balance activities which are not affecting hydro test completion and clear of Punch list and post punch list items after completion of activities and Plant commissioning activities.

25)Conversant with ANSI, ASTM, ASME, API, AWS Codes and Standards

26)Witness of Mechanical test for PQR & Welders performance Qualification test as per Approved WPS.

27)Review/Monitoring the Approved Quality and Inspection plan.

28)Review/Monitoring with Approved Drawings, Governing Standards and Specifications.

29)Review fabrication/Erection, documents and work quality in terms of specification, workmanship and other variables as indicated in the above-mentioned documents as per requirements of QC standard operating procedure and client’s specification.

30)Perform surveillance fit-up and visual inspection of all piping and welding works from piping pre- fabrication to field installation.

31)Verify/Review weld parameters of SAW, SMAW, and MIG & TIG process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS/LTCS/&NACE/SS/&DUPLEX/LOWALLOY/SS CLAD/Cu-Ni materials.

32)Quality surveillance, Welding Inspection, Documentation & Dimensional Check & Interpretation of radiographs as per cods & standards.

RESUME OF KEY PERSONNEL

33)Preparation of NCR/CAR/Technical Queries and follow up.

34)Conducting and Witness of WQT & PQR as per ASME Sec IX.

35)Documentation of reports prepares the As-built drawings to submit to day to day activities.

36)Inspection activities for fabrication and erection of Pipes, Vessels, Tanks, static and Rotating equipments, structural platforms.

Personal Details

Father’s Name M.A. CHANDRASEKAR

Age & Date of Birth 40, 29/12/1979

Gender Male

Passport No P0874026

PASSPORT EXPIRY 07/06/2026

Issue place Chennai, Tamilnadu

Nationality Indian

Martial Status Married

Languages known English, Hindi, Tamil, and Malayalam

Communication Address

14, MANGALAM VILLAGE

PALLIAGARAM POST,

KANCHEPURAM DIST – PIN-603107

TAMILNADU, INDIA

MOBILE – +91-958*******

Email: adl047@r.postjobfree.com, adl047@r.postjobfree.com

Contact this candidate