Power Plant sr.Engineer

CURRICULAM VITAE

CAREER OBJECTIVE:

To seek a challenging and growth oriented career in a dynamic organization, which believes in individual development. Would like to work in an innovative environment and contribute to the success of the organization...

Area of Experience: 61.5*4MW

1)BTG(BOILER/TURBINE/GENERATOR): Supervision of Transmitters (Pressure/Flow/Level/Temperature); Switches (Pressure, DP,Level,Thermal,Limit);MOV’s (Motorized Operated Valves) & CV( Control Valves);Gauges(Pressure,Temperature,DP,Level) ); RPC,PCD type operated dampers; Temperature Elements RTD,TC;SOV’s;Load Cell; SOX/NOX/SPM/O2 Analyzer; Air Blasters there calibration and maintenance.

TSI Panel-Woodward-505; Heat Expansion Module; Speed Cards; Servo card (DDV, LVDT); RAM Monitor, Bentley Nevada System (Vibration/Speed/Displacement Sensors).

BMS (Burner Management System): Igniter; Flame Sensor, Re-circulation Control valve; LOTV.

BOILER/TURBINE AUXILLARIES: BFP/CEP/ID/PA/SA/HP-LP DOSING/DTP/OIL CENTRIFUGE PUMP/LOP/SOP/EOP/JOP.

SWAS (Steam and Water Analysis System): Silica Analyzer; Level of PH, Conductivity, DO in a sample.

2)AHP(ASH HANDLING PLANT):Pneumatic Cylinders ;Pressure/Level Switches, Quick Exhaust Valves, Solenoid Operated Valves(SOV);Oil Lubricators;AFR;Transmitters,Temperature Controller; Bed Material Conveying System; HCSD (High Concentration Slurry Disposal); Compressors.

3)CHP(Coal Handling Plant): Instruments for protection of Belt Conveyors (Pull chord/Zero Speed Switches/Belt Sway Switches).Belt Weigher, Metal detectors.

4)DM/ETP: Rota meters; Flow meter; Level switches; PLC-AB-1200.

5)DCS (Distributed Control System): Honeywell EPKS-311.2-12.5 version. FTA (Field Terminal Assembly); Files; IO links; Controller; Firewall, switch (LAN); Stations (Flex, Console); LVS.

Logic testing / Trial run and execution:

1) Involve in erection and commissioning of DCS systems.

2) Complete loop testing from DCS to Field instruments / MCC and drives.

Finally, logic sequence testing with interlocks from DCS by simulating the conditions from field instruments and switches for each equipment.

3) Taking trial runs of equipment’s with the co-ordination with other related departments and Contractors as per given schedule in BTG, BOP, AHP and CHP area.

4) Troubleshooting and logic modifications of various equipment’s like Fans, pumps, Motorized valve, control valve, RPC & transmitters.

6)SAP: Preventive Maintenance module implemented through SAP.

7)BOP (Balance of Plant): CT fans (Lube oil, Vibration Switches), ACW (Auxiliary Cooling Water)/CCW (Condensate Cooling Water) Pumps; Transmitters; Gauges.

8)Fire Fighting System: LHS cable; Pressure Switches; SOV’s, DI/DO module. Hydrant/Diesel /Jockey pump.

Work Experience:

Presently working as Instrumentation Engineer in Adani Mining India Ltd Ambikapur-CG

Worked in Abhijeet MADC Nagpur Energy Pvt/Ltd.(61.5*4=246MW) Power Plant as C&I

Engineer from 12/07/2010 to 5/04/2014

Since 22 Feb. 2010 To 30 June 2010 Teaching in Govt. Polytechnic College Rewa. (M.P)

Current Profile:

1.Worked on GE faun Rx3i, Siemens 400 and Allen Bradley 400 PLC’s

2.Ladder logic, Sequential logic, HMI, scada developer, graphic modification for Coal Handling Plant and coal washary.

3.MIS report develop Link server &Configuration of switch

4.Signal exchange between two PLC’s through hardwired and switch.

5.OPC server configuration & Main plant PLC for data communication.

6.Material indene & Service create in SAP.

7.Service Billing processing in SAP.

8.Digitalization of Plant.

9.Condition monitoring system add in critical equipment.

10.Operation maintenance & commissions of Rake loading (coal) through SILO Rapid loading system.

11.FOIS integration preweighbin system (Rapid loading system).

12.Operation maintenance & commissions of Stacker & reclaimer.

13.Operation maintenance & commissions of 5MTPA DMC (Dance media cyclone) coal washing.

14.Operation maintenance & commissions of 10MTPA JIG coal washing.

15.Maintenance of weighbridge

16.Erection commissioning of primary coal auto sampler.

17.Erection commissioning of belt weigher.

18.All statuary complacence timely completed (stamping of belt weigher, weighbridge, HSD Pump, Nucleonic gauges Safety status report submitted AERB).

19.Factory licence renewal timely through ONLINE CG portal.

TRAINING

30 Days Vocational Training in “Bharat Sanchar Nigam Limited” at Rewa.

15 Days Vocational Training in “Police Telecommunication Organization” at Bhopal.

PROJECT UNDERTAKEN:

Project Title: Study of image processing using MATLAB(B.E. Major Project).

Project Title: Infrared remote control (B.E. Minor project).

Project Title: 8086 based traffic light control system(Diploma. Major Project).

ACADEMIC QUALIFICATION:

B.E. (Electronics& Communication Engineering) from Govt. Engineering College, Rewa in 2009 - 70.88%.

Diploma (Electronics& Communication Engineering) S.V. polytechnic College, Bhopal in 2006 – 64.42%.

High School from Model Higher Secondary School, Rewa in 2003 – 60.05%.

PERSONAL PROFILE:

Father’s Name : Mr. RamadharTripathi.

Mother’s Name : Mrs. SavitaTripathi.

Date of Birth : 12 May. 1987.

Marital Status : Single.

Sex : Male.

Nationality : Indian.

Languages Known : English, Hindi.

Permanent Address : S/O RamadharTripathi,

Police Motor Training School,Amahia Road,Rewa (M.P.) PIN -486001.

DECLARATION: I declare that above mentioned particulars are true to the best of

My knowledge.

SATISH TRIPATHI

SATISH TRIPATHI

Ph. No.+91-837*******.

Email - ******.**********@*****.***

*****************@**********.***

Contact this candidate