CURRICULUM VITAE
Vimal Davis T J
Design Engineer – Piping (Stress)
Phone: mob: +91 – 704-***-****, 949-***-****
E-mail: adg95u@r.postjobfree.com
Pg. No. : 1/6
EDUCATIONAL QUALIFICATION
• December 2014 – PG.Diploma in Oil and Gas Piping Engineering Design (A + Grade) ASTS Global Education (Approved by STED council, Gov. of India), Cochin, Kerala, India.
• April 2014 – Bachelor of Technology (B. Tech.) in Mechanical Engineering (First Class), Thejus Engineering College (University of Calicut), Thrissur, Kerala, India.
• March 2010 – Kerala State Board (12th STD), Board of Higher Secondary Examination
(84.25 0/0), Bethany St. John’s EHSS, Thrissur, Kerala, India. Course Attended
• May 2016 – Attended Course for Piping Flexibility Analysis (First Class) from B R Thakur
(Uhde India).
PROFESSIONAL EXPERIENCE SUMMARY
• Capable Piping Stress Engineer with 6 years of experience in Design & Detail Engineering of Oil & Gas, Nuclear Power Projects currently employed full-time at Engineers India Limited
(Gov. of India Undertaking), New Delhi, India.
• Endowed with the ability to carry out multiple tasks meticulously and simultaneously under challenging environments along with excellent inter personnel skills.
• Adroit in Static & Dynamic(Earthquake Spectra, Modal) Piping Stress Calculations of Big Bore, High Temperature critical lines connected to Shell & Tube Heat Exchangers, Centrifugal Pumps, Vertical Re-boilers, Reactor, Columns, PSV’S, Pressure Vessels, API-650 Storage tanks etc. using CAESAR II, PepS in compliance to ASME Piping code requirement and nozzle load qualification as per respective standard for EPCM / EPC / FEED projects. PERSONAL PROFILE
• Date of Birth : 24 November 1992.
• Marital Status : Single.
CURRICULUM VITAE
Vimal Davis T J
Design Engineer – Piping (Stress)
Phone: mob: +91 – 704-***-****, 949-***-****
E-mail: adg95u@r.postjobfree.com
Pg. No. : 2/6
• Nationality : Indian.
• Passport Number : M0238533.
• Languages Known : English, Hindi & Malayalam.
• Permanent Address : Thalakottoor House, Vylathur, Thrissur (Dt), Nhamanghat (P.O), Kerala (State), India – 679563.
COMPUTER PROFICIENCY
• Design Package : Nozzle Pro, FE-SIF, Navis works, Smart Plant Review,
. E-Browser, DWG True View, Pipe Data Pro, Auto CAD.
• Stress Analysis Package : CAESAR II (Version - 5.1, 7.0, 10.0), PepS (Version- 6.0).
• Application Package : M S Office. ( Word, Excel, Power Point ). ON JOB CAPABILITIES AND STRENGTH
• Selection of Stress Critical Lines Using Stress Analysis Design Basis.
• Stress Systems formation from P&ID’s for comprehensive Analysis Using CAESAR II, PepS.
• Preparation of Stress Critical Line List.
• Good control for Performing Static & Dynamic (Earthquake Spectra, Modal) Piping Stress Calculations of Big Bore, High Temperature critical lines connected to Shell & Tube Heat Exchangers, Centrifugal Pumps, Vertical Re-boilers, Reactor, Columns, PSV’S, Pressure Vessels, API-650 Storage tanks etc. using CAESAR II, PepS in compliance to ASME Piping code requirement and nozzle load qualification as per respective standard.
• Stress Analysis for Two-phase lines with Slug.
• Nozzle Analysis using WRC 107/297 and detailed FEM Analysis by Nozzle Pro.
• SIF Calculation of branch connections by FE-SIF.
• Preparation and issue of piping loads to Civil/Structure Dept. and Exceeding Nozzle loads along with qualified FE-Nozzle Pro Report to Mechanical Dept. for their review.
• Exposure to Pipe wall thickness, SIF, Trunnion check, Flange leakage & PSV Thrust force Calculations.
• Familiar with international codes such as ASME B 31.3, ASME B 31.1, ASME BPVC.III.1.NC, ASME BPVC.III.1.ND, ASME B 16.5, API 610, API 650, API 661 etc.
• Good exposure in Dynamic Analysis of Piping System due to Earthquake by considering Floor Response Spectra (FRS) & Seismic Anchor Movement (SAM) using PepS.
• Good at Stress Reporting, Support mark up, Support tagging using Support Std., and documentation of deliverables.
• Special Support Tagging & Sketch Preparation for 3-d Modellers to model in PDMS in order to design the Special Support by Civil/Structure Dept. while referring the 3-d Model.
• Good exposure for designing Expansion Loops in Piping Systems to control thermal movements.
• Competent knowledge of Preparing Load Case for various operating & occasional cases to perform Static Stress Analysis using CAESAR II.
CURRICULUM VITAE
Vimal Davis T J
Design Engineer – Piping (Stress)
Phone: mob: +91 – 704-***-****, 949-***-****
E-mail: adg95u@r.postjobfree.com
Pg. No. : 3/6
• Preparation of Spring / hanger, Sliding Plate Specification.
• Preparation of Clip Drawings for Columns & Pressure Vessels.
• Checking of ISO's as per Stress analysis & Support Standard.
• Selection of Pipe Supports, Spring / hanger, Special Pipe Supports.
• Providing Supports by engineering judgment for non-Stress Critical lines.
• Supporting of lines as per availability of structure ( referring from SPR / Navisworks) and getting the best possible optimum solution for minimum stresses in piping system and loads on the structure.
DETAILS OF EMPLOYMENT / PROJECTS INVOLVED / JOB RESPONSIBILITIES
• Presently ( From 28th September 2018) working with Engineers India Limited (Gov. of India Undertaking), New Delhi, India as Design Engineer – Piping (Stress). The Major Projects involved are the following :-
• Project - Guru Gobind Singh Polymer Addition Project.
• Client - HPCL- Mittal Energy Ltd. (HMEL).
• Unit - Dual Feed Cracker Unit (DFCU).
Job Responsibility Involves:-
• Preparation of Stress Critical Line List for our Zone.
• Preparation of Stress Systems Using P &ID Mark up.
• Done Static & Dynamic Analysis of Piping Systems.
• Analysed Top Suction (36 inch. Line) & Top Discharge (24 inch. Line) Centrifugal Pump lines.
• Analysed Wet Flare Header (84 inch. Line) Connecting to Flare Knock out Drum and its circuit lines in pipe rack.
• Analysed Dry Flare Header (52 inch. Line, -180 Degree) Connecting to Flare Knock out Drum and its circuit lines in pipe rack.
• Analysed Lines Connected to Vertical Re-boiler & Column.
• Analysed High temperature (500 Degree) lines connected to Reactor.
• Analysed High temperature lines connected to Shell & Tube Heat Exchangers.
• Analysed Two-Phase lines (36 inch Line) with Slug.
• Analysed Big Bore lines (30 inch Line) Connected to Column top Elevation.
• Analysed Big Bore, High Temperature Steam lines in Pipe Rack.
• Analysed Lines connected to Large Dia. API 650 Storage Tanks.
• Preparation of Clip Drawings for Columns & Pressure Vessels.
• Checking of ISO's as per Stress analysis & Support Standard. CURRICULUM VITAE
Vimal Davis T J
Design Engineer – Piping (Stress)
Phone: mob: +91 – 704-***-****, 949-***-****
E-mail: adg95u@r.postjobfree.com
Pg. No. : 4/6
• Preparation of Spring / hanger, Sliding Plate Specification.
• Preparation and issue of piping loads to Civil/Structure Dept. and Exceeding Nozzle loads along with qualified FE-Nozzle Pro Report to Mechanical Dept. for their review.
• Special Support Tagging & Sketch Preparation for 3-d Modellers to model in PDMS in order to design the Special Support by Civil/Structure Dept. while referring the 3-d Model.
• Supporting of Non-Critical Lines by Engineering Judgement which satisfy the flexibility equation as per 31.3.
• Involved in Final Checking of ISO's as per Stress analysis & Support Standard.
• Preparation of Final Stress Reports, Support mark up and documentation.
• From 23ed January 2018 – 11th September 2018, working with TATA Consulting Engineers Ltd, Mumbai, Maharashtra, India as Piping Stress Engineer. The Major Projects involved are the following :-
• 4 x 700 MW, GHAVP 1 & 2 (Nuclear Power Project) – Plant Engineering for Nuclear Power Corporation of India Ltd. (NPCIL).
Job Responsibility Involves:-
For Nuclear Power Plant Project:-
• Piping Stress System Qualification of APW, SW lines (Class 2 & 3 lines) connected to Centrifugal pumps, Plate type heat-exchangers and long running headers in CB, RAB,WMP Buildings by Considering Floor Response Spectra ( FRS) & Seismic Anchor Movement (SAM) in compliance to ASME BPVC.III.1.NC/ND Piping code requirements using Software package PepS 6.0.
• Preparation of Stress Mark-ups for qualified lines.
• Delivering of Piping loads to Support team for Support & EP qualifications.
• Reviewing 3-D Model for ensuring the Piping Stress System & Supports modelled by 3-D Modelling team are clash free and as per Stress Comments.
• Updating & qualifying Piping Stress Systems by inputting actual Stiffness of Supports given by Support team.
CURRICULUM VITAE
Vimal Davis T J
Design Engineer – Piping (Stress)
Phone: mob: +91 – 704-***-****, 949-***-****
E-mail: adg95u@r.postjobfree.com
Pg. No. : 5/6
• Preparation of Stress Reports for qualified lines for delivering to NPCIL for approval.
• Updating Piping Stress Systems, Reports as per NPCIL Comments.
• From 29th December 2014 - 20th January 2018, working with Pyramid Consulting Engineers Pvt Ltd, Thane, Maharashtra, India as Junior Design Engineer – Piping Stress. The Major Projects involved are the following :-
• 7500 BPD Petroleum Regeneration & Processing Facility (Mini Refinery) – EPC Project for ECOMAR, Fujairah, UAE.
• Installation of LPG mounded bullets at ONGC URAN – EPC Project for ONGC URAN, Navi Mumbai, India.
• Desalter and Produced water treatment System for PF-1 & PF-2 – FEED Project for Gulf Keystone Petroleum International Ltd., Shaikan Field, North Kurdistan.
• Sahel Oil Terminal Facility, TELESOM Compound, Berbera Port, Somaliland – FEED Project for TELESOM.
Job Responsibility Involves:-
• Preparation of Stress Critical Line List.
• Preparations of Unit file of CAESAR II as per Project Requirement.
• Piping Stress System Qualification of the lines connected to Centrifugal Pumps using CAESAR II.
• Piping Stress System Qualification of the lines connected to Shell & Tube Heat Exchangers, Columns, Pressure Vessels using CAESAR II.
• Piping Stress System Qualification of Long running flare lines using CAESAR II.
• Piping Stress System Qualification of the lines connected to Air Coolers using CAESAR II.
• Piping Stress System Qualification of the lines connected to large diameter Storage tanks (with settlement) using CAESAR II.
• Preparing Load Case for various Occasional cases such as PSV Pop Up Case, Wind & Seismic Case etc. to perform Static Stress Analysis using CAESAR II.
• Preparing Load Case for various Operating cases such as PSV Working – Standby Case, Pump Working – Standby Case, Tank or Vessel Settlement Case etc. to perform Static Stress Analysis using CAESAR II.
• Designing Expansion Loops in Piping Systems to control thermal movements.
CURRICULUM VITAE
Vimal Davis T J
Design Engineer – Piping (Stress)
Phone: mob: +91 – 704-***-****, 949-***-****
E-mail: adg95u@r.postjobfree.com
Pg. No. : 6/6
• Selection of Pipe Supports, Spring / hanger, Special Pipe Supports.
• Preparation of Spring / hanger, Sliding Plate Specification.
• Perform Trunnion check, PSV Thrust force Calculations.
• Preparation of Final Stress Reports, Support mark up and documentation.
• Involved in Final issuing of piping loads to Civil for Structure Design.
• Involved in Final Checking of ISO's as per Stress analysis & Support Standard.
• Involved in Supporting activity of Non-Stress Critical Lines.