Engineering Mechanical

SUNIL KUMAR M

*/**, ******************* (village),

Chennapalli (post),

Krishnagiri, Tamil Nadu, India - 635117.

Email-ID: ***********@*****.***

Phone Number: 909-***-****/900-***-****.

Objective

To pursue a challenging career and be a part of a progressive organization that gives scope to enhance my knowledge, skills and to reach the pinnacle in the Mechanical Engineering and research field with sheer determination and hard work.

Educational Qualification

Course Year of Study Institution

Percentage of

marks

ME (Thermal

Engineering)

2018-2020

Sathyabama Institute of

Science and Technology

92

BE(Mechanical

Engineering)

2014-2018

Saveetha Engineering

College

88

HSC 2013-2014

Sri Saraswathi Mat. Hr.

Sec. School

92.8

SSLC 2011-2012 Model Hr. Sec. School 89.8

Project Highlights

A Project on “Design, Fabrication and Performance Analysis of Wind Tree Turbine”. Abstract: The wind tree turbine compact enough to be installed on the rooftops and roadsides to generate power at minimal wind speed was designed and performance characteristics of a wind turbine are analyzed using CFD by varying Tip Speed Ratio.

A Project on “Design and Performance analysis of Savonius VAWT for regional speed using CFD”. Abstract: The Savonius type vertical axis wind turbine is designed with various profiles and analysis is carried out for a regional wind speed by using CFD.

A project on “Autonomous Underwater Vehicle”.

Abstract: The autonomous underwater vehicle is designed and fabricated to find and pick the objects under the water.

A Project on “Alternative Fuels”.

Abstract: Lemongrass Biodiesel is used as an alternative fuel and metal oxides are used as additives in order to increase the brake thermal efficiency of a Diesel engines with reduced emissions.

A Project on “Green Synthesis of Nano-Zinc Oxide”. Abstract: Nano-Zinc oxide additives was green synthesized through aqueous extraction process from oldenlandia leaf and characterized by SEM, FT-IR, and XRD. Journal Publications

Web of Science Journals

Yuvarajan Devarajan, N Beemkumar, Mageshwaran G, Sunil Kumar M & Durairaj R B- “Feasibility study of employing diverse antioxidants as an additive in research diesel engine running with diesel-bio- diesel” in Fuel 227(2020)118161 with an impact factor of 5.128.

Yuvarajan Devarajan, Gautam Chobey, Sivasaravanan Sellappan, Sunil Kumar Muniraj, Booma Devi Perumal Pillai- “Emission Study on the Effect of Ignition Improver in Diesel Fuelled Engine” in Petroleum Science and Technology (Accepted) with an impact factor of 1.070.

Sunil kumar M, R Rajasekar, S Ganesan, S P Venkatesan, & V Praveen Kumar- “Evaluation of Metal Oxide Nanoparticles in Lemongrass Biodiesel for Engine Performance, Emission and Combustion Characteristics” in Materials Today- Proceedings (Accepted) with an impact factor of 0.97.

Sunil Kumar M, David Selvaraj, Leelakrishnan E, Sundara Vignesh N & Aswini S- “Influence of Curcumin Nanoparticle Blended Biofuel in Engine Performance, Combustion and Exhaust Characteristics” in Materials Today- Proceedings (Under Editor Evaluation) with an impact factor of 0.97.

Leelakrishnan E, Sunil Kumar M, David Selvaraj, Sundara Vignesh N & T S Abhesheka Raja-

“Numerical Evaluation of Optimum Tip Speed Ratio for Darrieus Type Vertical Axis Wind Turbine” in Materials Today- Proceedings (Under Editor Evaluation) with an impact factor of 0.97.

Sunil Kumar M & Leelakrishnan E- “Influence od Extrusion Process in Manufacturing of VAWT Blades” in Journal of Wind Engineering & Industrial Aerodynamics (Under Review) with an impact factor of 2.739.

Sarga S Anand, Nirmala R, T R Praveen Kumar, Sunil Kumar M- “Flexural Characteristics of Wire Mesh Reinforced Concrete Beam Blended with Rice Husk Ash (RHA) and Nano Silica” in Iranian Journal of Science and Technology, Transactions of Civil Engineering (Submitted) with an impact factor of 0.283.

Scopus Indexed Journals

SP Venkatesan, S Venkatesh, M Sunil Kumar, S Senthamizh Selvan & Yungandhar Sai- “Analysis of the blade profile of the Savonius wind turbine using computational fluid dynamics” in International Journal of Ambient Energy-Issn: 0143-0750(P) 2162-8246(O) with an impact factor of 1.740.

SP Venkatesan, V Praveen Kumar, M Sunil Kumar & Suraj Kumar-“Computational analysis of aerodynamic characteristics of dimple airfoil NACA 2412 at various angles of attack” in International Journal of Mechanical Engineering and Technology-Issn: 0976-6340(P)0976-6359(O) with an JIF of 10.6879.

Purusothaman M, Sunil Kumar M, Praveen kumar V, Suraj kumar & Senthamizh Selvan S- “Design And Thermal Validation Of Four Wheeler Disc Brake Using Different Material” in International Journal of Innovative Technology and Exploring Engineering-Issn: 2278-3075, volume-8 Issue-8 June,2019 with SJR of 0.1.

Purusothaman M, Sunil Kumar M, Praveen Kumar V, T N Valarmathi, Hemanandh J & Ganesan S-

“Environmental analysis of Industrial rotating Air preheater using Computational Fluid dynamics” in Indian Journal of Environmental Protection IJEP 40 (2): 216-220 (2020) with an impact factor of 0.09.

R Rajasekar, S Ganesan & M Sunil Kumar- “Noise and Emission Characteristics of Biodiesel used in Multi-Cylinder Diesel Engine” in Indian Journal of Environmental Protection IJEP39 (10): 924- 927(2019) with an impact factor of 0.09.

Leelakrishnan E, Sunil Kumar M, M Mohamed, Devadoss Peter, R Silambarasan & S P Venkatesan-

“Performance Evaluation of Engine by Using Designed and Fabricated Dual Intake Manifold” in International Journal of Ambient Energy (Under Editor Evaluation) with an impact factor of 1.740.

G.Mageshwaran, R.B. DuraiRaj, M Sunil Kumar, Saravanan. T, Sathish kumar. A- “Experimental Investigation on improvement of mechanical properties of dash panel by thermopolyolefin” in Indian Journal of Environmental Protection (Accepted – Under Review) with an impact factor of 0.09.

Praveen Kumar V, SP Venkatesan, R Rajasekar, B Kanimozhi, Sunil Kumar M-“Design and Performance Analysis of Savonius Vertical Axis Turbine for Regional Wind Speed by Computational Fluid Dynamics” in American Institute of Physics (Accepted – Under Review) with an impact factor of 1.795.

D Jani christal dhas, M Sunil Kumar, N Sundara Vignesh- “Extensive analysis of wear behavior on Alumina-PTFE Composite” in International Conference on Advanced Materials and Manufacturing. Co-Curricular Activities

Attended International Conference on “Advanced Materials and Manufacturing” at CAPE Institute of Technology, Tirunelveli.

Attended “Inplant Training” in “TVS Motor Company”, Hosur.

Participated in the Fifth National Competition in “Student Autonomous Underwater Vehicle-2017”.

Participated in the module Gears of the course “Kinematics of Machines” by IIT Madras.

Participated in “Inside Engine, PLC and SCADA” workshop organized by Saveetha Engineering College.

Participated in “Laser & Photonics” workshop organized by Saveetha Engineering College in association with IEEE.

Technical Skills

Solid works

CATIA

CFD

ANSYS

Microsoft Office

Awards

Awarded for 38th University Rank Holder in UG from Anna University, Chennai.

Awarded as “Best Student Award” from Saveetha Engineering College, Chennai.

Awarded for participating module gear course by IIT Madras. Personal Details

Father’s Name : Muniraj K

Mother’s Name : Girija M

D.O.B : 24/06/1997

Nationality : Indian

Marital Status : Single

Known Languages : Kannada, English, Tamil, Telugu, and Malayalam. Date :

Station : Hosur. [Sunil Kumar M]

Contact this candidate