Engineer Medical Device

Curriculum Vitae

ATMANAND C. MUGABAST

Current Address:

#B 803 Kohinoor Tower

KSB RD, MIDC, Pimpri Colony, Pimpri-Chinchwad, Pune - Maharashtra 411018

Email: **********@*****.***

Cell: +91-782*-******

Objective:

To be a part of an organization, where I can fully utilize my skills and make a significant contribution to the success of the employer that will push me to grow as a professional within the company.

Summary:

@ Capgemini Technology Services India Limited (from June 2018-July 2020).

As a Senior Consultant worked on projects related to Model Based System Engineering (MBSE), 1D simulation Application.

Was deputed to Honda R&D Japan on projects related to MBSE.

@ Aeronautical Development Agency (ADA) Bengaluru (from Sep 2012 – May 2018).

Worked as Project Engineer, where I was involved in 1D system level simulation, analyze the system in MBSE way of thinking using 3D Experience (Functional and Logical Design app) tool, where Dymola tool was used for the dynamic behaviour model simulation.

Worked as Senior Research Fellow in General System Directorate, performing thermal analysis and testing of Environmental Control System (ECS) Line Replaceable Units (LRU's). Component and system level 1D simulation which were executed in Ecosimpro tool.

Was involved in the testing of the ECS valves, heat exchangers for their performance analysis thru experimental analysis.

Tools/Skill set:

•3D Experience (Functional and Logical Design app), Dymola (for Behaviour Modeling)

•SysML-Cameo System Modeler (No Magic/MagicDraw-3D experience),

•Open Modelica, AMESim, UniGraphics-Nx, CATIA, MS Office Tools

Professional Experience:

Senior Consultant at Capgemini, Pune from June 2018-July 2020.

Project Engineer, ADA Bengaluru from Dec 2016 – May 2018.

Senior Research Fellow, ADA Bengaluru, from Sep 2012 – Nov 2016.

Asst. Prof at VDRIT Haliyal, from Sep-2009 to Aug-2012.

Certificates:

INCOSE Member

Coursera Certification:

Digital Manufacturing & Design Technology (Industry 4.0)

Introduction to Systems Engineering

MBSE: Model-Based Systems Engineering

Requirements Writing

Projects at Capgemini, Pune:

1.Company name, location: Capgemini Japan, Deputed to Honda R & D Centre, Japan

Role: Guest Engineer (Aug 2018-May 2019)

Description of work:

Creation of RFLP for Under Cover, which was part of 3WPoC.

Similar Project were carried out with respect to Body_MDO

Tools used: No Magic-Cameo System Modeler, MS Excel

1D Simulation of the Active Suspension System – Tool used: AMESim.

2.Description of work: Worked on PoC for Process Industry

Created an MBSE template for the Heating/Drying solutions in Process Industry.

Took an example on drying solution where heating element was needed to be designed/selected based on the requirements.

RFLP (Requirement, Functional, Logical and Physical) layers were created in the 3D Experience (F & L Design) tool, and traceability between the layers were shown.

The 1D simulation model was built in the Dymola tool, which helps to simulate the model for different input and environmental conditions.

3.Worked on the PoC for Johnson & Johnson Medical Device.

The main work on the PoC was to capture the requirements, maintain the hierarchy for medical device, this was done in Cameo System Modeler a SysML tool.

Projects at ADA, Bengaluru:

1)Simulation and Testing of Hydraulic System and its components of Military Aircraft.

Tools: 3D Experience (Functional and Logical Design app)/Dymola, AMESim

Hydraulic System of Aircraft consists of components like Variable displacement pumps, Filters, Non-Return Valves, Shuttle Valve, Bootstrap Reservoir, HMDG (Hydraulic Motor Driven Generator), HMDFP (Hydraulic Motor Driven Fuel Pump), etc. All these components have been simulated for different input conditions in the 1D Simulation tool Dymola.

Simulation of sub-systems, systems for different input requirements/conditions in tool.

The above Component, Sub-systems, Systems were simulated in the Dymola tool for different test conditions, which is inbuilt in the RFLP structure of 3D Experience (F & L app).

Some of the above hydraulic system components were also simulated in AMESim tool.

2)1D Modeling and Dynamic Simulation of ECS.

Tools: EcosimPro.

The main objective of ECS dynamic simulation is to develop 1D system model and simulate the flight conditions in EcosimPro Software, and to verify with that of Fight test data.

This model will save lot of hours in rig testing and flight testing and will help in optimizing the ECS LRU’s.

Development of controller logic for the functioning (open/close) of the ECS valves.

Subsystems Simulation consisting of Bleed system, Cold Air Unit and Cabin & Avionics.

Finally, the integration of the Subsystems and simulate the flight conditions and validation.

3)Data Generation for the two phase and single-phase heat transfer coefficient.

Tools: MS Excel.

Two phase & single phase heat transfer analysis were carried out experimentally for different type of fin configuration in compact heat exchangers.

These exchangers were part of the Vapour Compression Refrigeration System (VCRS), with its application in Military aircrafts.

The collected data were analyzed for the two phase heat transfer coefficient and two phase heat transfer factor for lanced & offset fin and wavy fin.

4)Flight test data analysis of various versions of LCA, the flight test data which was collected in Excel sheets were analyzed for the behaviour of ECS LRU’s and ECS as a whole.

Academics:

M. Tech (Heat Power Engg.) at VNIT Nagpur (Formerly VRCE), from Aug 2007 to May 2009, securing 8.35 CPI.

B. E (Mechanical Engg.) at SDMCET Dharwad, from Sep 2002 to June 2006, securing 66.3%.

Activities:

Volunteer and Participation in "CHEW-15" a 2 day International Workshop on Compact Heat Exchangers held at PES University in Coordination with ADA, Dec 2015.

Coordination and Participation in “2nd Workshop on Recent Progress in Heat and Fluid Flow Research” held at NAL Bengaluru in Coordination with ADA, Aug 2014.

Personal Details:

Father’s Name: Chandrashekar Mugabast

Languages Known: Kannada, English, Hindi

Date of Birth: 2nd November, 1985

Marital Status: Married

Passport: Valid till 2029.

Permanent Address: #166 Raj Nagar 1st Cross, Gulaganjikoppa,

Malapur last bus stop Dharwad- 580008, Karnataka, India.

Declaration:

I, Atmanand C. Mugabast hereby declare that all the details and particulars furnished above are true to the best of my knowledge.

Date: September 2020 (Atmanand C. Mugabast)

Contact this candidate