Power Plant Technician
Resume:
CURRICULAM VITAE
INSTRUMENT COMMISSIONING TECHNICIAN
PERSONAL
Name : Patel Dineshbhai Bhikhubhai
Date of Birth : 6th may 1975
Nationality : Indian
Passport No : Z 2221515
Place of Issue : SURAT (INDIA)
Validity : Nov 2023 :
Address for communication
B33 Akshar town ship,
Near S G M School, Chhapra road,
Navsari 396445
GUJARAT. INDIA.
Mobile - +91-972*******
Mobile - +919*********
Skype: dbpatel6575
E-mail : ***********@*****.***
*****************@*****.***
Permanent Address : At post –Umbharat, via- Maroli Bazar
Ta-Navsari, Dist-Navsari
Gujarat (India)
Qualifications :
ITI – Electrical with Distinction in 1994 from Industrial Training Institute, Navsari,
Diploma in Instrumentation & Control Engineering
Trainings & Career Achievements
Holding Permit to work/ Work Site Supervisor Card.
LOTO Training.
Working At Heights.
TSTI/TSTO Training.
H2S Course Conducted by Team energy (Qatar)
Working at heights
TBOSIET (Opito approved) Qatar) : 02/11/2019
Sea Survival Training
Helicopter ditching
Basic & Intermittent Fire fighting course.
Personal Strengths
Strong in Interpersonal Communication
Flexibility & Ability to Work in different Circumstances
Focused on company objective and Approach to meet the Desired Results
Languages Known: English, Hindi, Gujarati
Computer Literacy:MS/EXCEL/WORD
Work History:
During my 16th years of experience in Process Control Instrumentation of chemical, power plant, Petrochemical and Oil/gas industries at various positions in India and abroad I have gained expertise in Instrumentation field. I was involved in Erection, Commissioning, Start up as well as Maintenance activities in different location. I have gained very good experience in Routine Maintenance, Preventive Maintenance and Corrective as well as Shutdown Maintenance in different facilities. Well Experience in fault finding, troubleshooting and start up of process control instrument, equipment in Process Plant. I am well aware of documentation system, Safety procedure required to carry out safe and smooth job in Industries. I have worked in different type of activities related to Commissioning, Trouble Shooting, Overhauling Loop checking, Repair, calibration and Maintenance of all kinds of electronics, pneumatic and Hydraulic.
JOB EXPERINCE – Total 16 Years ***********@*****.***
KENTECH LLP (KAZAKISTAN)
Position: Senior Instrument commissioning technician
Project : Tengiz Chevron Oil
Period : 12th October 2018 to 02nd January 2020
Nature of Job: Personally involved in loop checks, Pre- commissioning and commissioning, Function checks,and field to RIE (Control room) for all types field instrument and having ability to loop drawing red line handle success fully all land test instruments, Pascal strock valves,Control valves,wellhead control panel loop check device loop check and commissioning and start up,Fire and gas devices loop check etc,
CLINT: SCHLUMBERGER, Fircroft (KUWAIT)
Position: Instrument commissioning Technician
Project: E R (KOC)
Period: 15th March 2018 to 20th Sep 2018
Nature of Job: Personally involve in loop checks, Pre-Commissioning & Commissioning,
function checks, and field to control room for all types field instruments and having Ability to loop drawing, handle success fully all land of test instrument, like primary and secondary instrument and also Capable pf calibrated all kind of instrument devices, Worked with Assist vendors for commissioning of vendor packages (Hot oil, T E G,M R U,Comprasior,etc.) Having experience on control valves, on/off valves, calibration and maintenance. also involved to give support DCS & SIS for loop check, logic check & functional check,
Team Energy Qatar
Position: Instrument Control Technician
Client : N O C Qatar (Offshore)
Period : 31st sep 2016 to 09th Feb 2018
Job Task Includes Instruments Loop Testing, Line work,P,P,M work, Cause & Effect Testing (Function testing) Commissioning Of Process Control Instrument Electronic Transmitters, Control Valve, On/Off Valve (BETTIS), Orbit valve, Partial Stroking Testing, Fire & Gas System, Loop Testing & Function Checks from Field To Control Room For All Types Field Instrument And Having Ability to Loop Drawings, Handle Successfully All Land of Test Instrument, Like primary and Secondary Instrument,
IRM OFFSHORE SERVICE (QATAR)
Position: Instrument Control Technician
Client : Oxy, Maesrk oil, Dolphine (Offshore)
Period : 31st oct 2014 To 25th June 2016
Nature of Job: Plant maintenance as a PM, SM, Fire and gas system, Well head panel, Compressor, Control valve, and all type instrument device,
Working with shutdown activities like disconnects & Re-installation of Field Instrument Devices, Calibration, loop checking, and control valve stroke check etc. I was following safety rules & procedure.
CHEVRON NIGERIA LTD.
Position :( PRE. COMM./ COMMISSIONING INSTRUMENT SPECILIST)
Client : CHEVRON NIGERIA LTD.
Period : SINCE20th Dec 2011 TO 31ST March 2014
Project: ESCRAVOSGAS TO LIQUID ( EGTL)
Nature of Job: Involved in loop check, Pre commissioning / commissioning of Instrument. Did Cause & Effect Test, Testing of MCC loops, and Troubleshooting on Control variables. Worked with Oxygen, N2 instruments. Assist vendors for commissioning of vendor packages (wax, oxygen, water, ion exchange, boilers, Steam turbines, diesel generator, ASU UNIT-1/2 etc.) Having experience on control valves, on/off valves, calibration and maintenance. also involved to give support DCS & SIS for loop check, logic check & functional check
Having experience on PTW system.
HYUNDAI HEAVY INDUSTRIES
Position : INSTRUMENT TECHNICIANPRE. COMM./ COMMISSIONING
Working Thru : Hyundai Heavy Industries (Escravos Gas Project Phase 3).
Period : 14th October, 2009 to 3rd Sep 2010
Nature of Job : My work here includes calibration of different types of process instruments such as pressure transmitters, level transmitters, flow transmitters, absolute pressure transmitters, temperature transmitters, control valves, pressure gauge, pressure switches, level switches, temperature switches, pressure relief valves, etc.
Skilled in loop checking Process Control System (PCS – YOKOGAWA) or PAS (Process Automation System using Field Bus system, YOKOGAWA), Safety Instrument System (SIS
Work impulse tubing of transmitters and airlines of control valves (stainless and copper tubing) Also I am work on (S R U) Unit,
Troubleshoot abnormalities arising in the plant and oilfield equipment.
Execute all assigned work tasks in line with agreed plant operating philosophies, and in line with current Maintenance Craft Procedures and work practices.
Give guidance to Assistant or Trainee technicians in the team - to aid their development.
Working Area : Chevron Nigeria Onshore Gas Project, Escravos.
COMPSIP A AL ALI
Position : INSTRUMENT TECHNICIAN
Client : Bapco Refinery Bahrain
Period : 24th may2008 to 26th mar 2009
Nature of Job : Worked with As a Bapco Refinery
Working with Calibration, Installation & loop checking and commissioning of all type of Instruments like transmitter, control valve, switches, gauges, ESDV on-off valve, I/P conveners, valve positioner, level troll, interface level troll, thermo couple, RTD. Familiar with Rosemount hart-265/375, Honeywell (SFC). System like Honeywell DCS & PLC.S R U Uniit,Ghadhring centre, Modification Start up and commissioning Activities. I was working with safety rules and thought Proper Procedure. I have good safety record.
Pneumatic/electronic Transmitters, Well Test facility, S500 flow computer, Fire and gas system, Solar turbine, Ruston turbine, Carry out monthly local and remote ESD TEST during PM. and maintaining good housekeeping, etc.
I am able to complete my job task independently with minimum supervision.
EMCO U A E
Working Thru : UAE
Position : INSTRUMENT TECHNICIAN
Period : 8thDEC.2005 to 10th march2008
Nature of Job : worked Done In Refinery Bu-Hasa Project,& Inter Refinery pipeline Project of installed of all types Instrument such as a Transmiter,Control valve of single & double action, switches Thermocouple,RTD’S also Capable to Calibration, Loop Check, Pre-commissioning & Commissioning activities etc.
Working Areas: Storage and Loading Area
AL MUHALAB CONTACTING COMPANY
Working Thru: Power plant (Kuwait)
Position: INSTRUMENT TECHNICIANPRE. COMM./ COMMISSIONING
Period : 6thoct 1997 TO 20TH NOV 2001
Nature of Job: Personally involve in loop checks, function checks, and field to control room for all types field instruments and having Ability to loop drawing, handle success fully all land of test instrument, like primary and secondary instrument and also Capable pf calibrated all kind of instrument devices,
Working Areas: PLANT AREA
I C B LIMITED
Working Thru : Hazira Surat (Offshore)
Position : ASST INSTRUMENT TECHNICAN
Period : Nov1994 to Oct 1996.
Nature of Job : Preparation in instrument calibration shop of all types of instrument,function test, testing of impulse line &air line, Testing of temperatures element, calibrated of flow,pressure, Temperature both high & low switches, capable remove & Re installed of control valve Worked for maintenance of Gas Plant and Utilities Instrumentation System. Job involves Preventive maintenance, Corrective maintenance, Calibration, Trouble Shooting of Field Instrument & Control system.
Working Areas: Plant
JOB RESPONSIBILITIES
Instrument Maintenance of the plant: Field Modifications, Fault Diagnosis & Trouble Shooting, Calibration & Inspection of Instrumentation Work, Execute PM & CM Jobs.
Erection, Pre-commissioning & Commissioning Activities : Monitoring the Job execution with QA & QC, Instrumentation Loop Checking,Testing & Commissioning of Logic & Interlocks, Instrumentation Data Sheet Verification,Punch List Clearance
Conversant with Process Flow Diagrams and P&IDs, Loop, Logic & Instrumentation documents.
Responsible for Day to Day Activities involved with Central Control Room & maintenance personal Eg.Job Distribution, Safety Talk, and Permit Authorisation etc.
Liaising with the Vendors, Manufacturers and other contracting company on requirement basis.
A LIST OF PACKAGE / SYSTEMS HANDLED
oFoxboro I/A series DCS (Invensys)
oGTI – Yokogawa ( ESD System )
oHoneywell ESD (Fail Safe Controller - QMR System)
oAllen Bradly PLC (Control Logix-5555)
oModicon PLC
oDaniel Custody Metering & Proving System(S-500)
oMachine Monitoring Systems of Bentley Nevada-3300 Series
oShip Approaching System
oFire and Foam Systems
oENRAF System
oSurge Relief Systems
oQuick Release Hook Systems
A LIST OF INSTRUMENTS/EQUIPMENT HANDLED
Rosemount Electronics Tx (1151) & Smart Tx (3051) for Flow, Pressure, Level & Temperature
Transmitter’s Electronic & Pneumatic (Rosemount, Yamatake Honeywell, Foxboro, Taylor, Yokogawa, Kent )
Flow Instruments: PD Meter, Turbine Meter, Magnetic Flow Meter, Coriolis Mass Flow Meter & Vortex Flow Tx, Oval Gear Meter, Flow Totalizer
Transducers and Converters: I/P & P/I ( Rosemount Taylor, Bells, Moore, Foxboro),
Safety Instruments &Fire Monitors
Valves (MOV, ESD & On/Off): Limitorque and Rotorque
Control Valves: Masoneilan, Gulde, Kent, Fischer, IL, Valtek, Control Components etc.
Hydraulic control valves – Amri, Domgas
Flow, Pressure, Level & Temperature Switches, ( SOR, Ashcroft, Delta )
Rosemount Scanner, Limit Switches, SOVs and Current Sensors
FMasoneilan and Tokyo Keiso Level Troll
Electronic and Microprocessor based Recorders and Controller Of Foxboro
Package Systems: Instrument associated with package system for Air Compressors (Ingersoll Rand,), Air Driers, Boilers, Booster Compressors, Propane and Butane Blowers
Well aware of P&ID, Interlock Logic ladder diagrams, Loop checking and Maintaining good housekeeping
Thanking You,
Your faithfully
Dinesh B Patel
Contact this candidate