HSE Engineer

AMAN KUMAR

Sr. Loss Prevention Engineer

B. Tech. in Chemical Engineering (2005 – 2009)

Uttar Pradesh Technical University, Lucknow, India.

M. Tech. in Health, Safety and Environment Engineering (2009 – 2011)

University of Petroleum & Energy Studies, Dehradun, India.

Flat No. 1106, Al Manama Building, Al Mujarrah, Sharjah, UAE.

Mob: +971-*********; E-mail: ***********@*****.***

Summary

A Professional Safety Engineer (M. Tech. in Health, Safety and Environment Engineering, specialization in Industrial Safety & B. Tech. in Chemical Engineering) having 10+ years international experience in Technical/ Process Safety for Major Operators i.e. ADMA-OPCO, ADNOC, ZADCO, QP, Aramco, KOC, Abu Dhabi Airports Company (ADAC), TRANSCO, Indian Air Force, ONGC, Petronet, Reliance, Cairn, ENOC, DUSUP, Syncrude.

Involved in oil & gas (Offshore, LNG, Onshore, Refinery, Tank Farms & Cross-Country Pipelines), infrastructure, townships, control rooms, HV substations, Water Treatment Plant, high risk missile explosive storage facilities projects, proposal technical notes for all phases concept, FEED, detail design, construction, procurement, commissioning and operation support.

Graduate Member of Institute of Occupational Safety & Health (IOSH).

NEBOSH – International General Certificate from National Examination Board in Occupational Safety and Health (UK).

Work Experience:

From/ To

Organization

Designation

2016 - Present

SNC Lavalin, U.A.E.

Sr. Loss Prevention Engineer

2015 –2016

Petrofac International Ltd. & CCC, U.A.E.

Loss Prevention Engineer

2012 – 2015

Technip, India

Sr. HSE Design Engineer

2011 – 2012

L&T Valdel Pvt. Ltd., India

HSE Design Engineer

2010 – 2011

Technip KT India Ltd., India

PGEIT, HSE Design

Key Areas of Expertise / Particularly involved in:

Project HSE Plan, HSE Design Basis/Philosophies.

Design of Fire Protection, Detection, Prevention & Inert Gas Suppression System for Plants & Buildings.

Fire water steady state hydraulic calculations using Pipenet (Network & Spray/ Sprinkler).

Layout drawings, isometrics & PID’s for Fire water network, spray & sprinkler system.

Fire water pump system design as per NFPA 20, datasheets, PID’s, pump room design & arrangement layout.

Datasheets & Specifications of Fire water, Firefighting & Life Safety Equipment’s, Safety Signs.

Fire detection & alarm system layout drawings, block diagram, single line diagram, specification & datasheets for Plants & Buildings.

Firefighting equipment, life safety, personnel protection, escape route & safety signs layout.

Fire strategies & fire rating drawings for Infrastructure & Buildings Complexes.

Building Risk Assessments & occupancy calculation-based architecture safety design study.

Hazardous/ Electrical Area Classification Drawing & Fire Hazardous/ Proofing Drawings.

Safety & Firefighting Equipment MR, MTO, Vendor TBE.

Task Based Risk Assessment, site inspection, establishing site safety requirement guidelines, carry out Site Risk Assessment including HAZID.

Develop Performance Standards for maintenance activities as per ADNOC Guidelines

Carry out Building Risk Assessments as per NFPA requirements.

Human Factor Study including ergonomics analysis for safe work environment indoor as well as during inherent safety design.

Vendor documents review, vendor coordination during entire project phase i.e. engineering, installation, site inspection/ acceptance & handover.

Hands-on experience as workshop Scribe and performing studies for onshore & offshore facilities such as Flare Dispersion and Radiation Study, HAZID, HAZOP, ENVID, OHID, SIL, COMAH, SIMOPS, HSEIA, Building Risk Assessment, F&G Mapping Study, Planning for Start-Up, HSECES Identification, Performance standard development.

Participation & review of following safety studies like QRA, EERA, FERA, Bow-Tie, Dropped Object, Noise Study, Initial Environmental Examination (IEE), Design Safety Review, Constructability Review.

Preparation of safety studies Closeout Report & HSE Risk Register.

Deep understanding of Process Safety management, Fire Safety Management, Integrated Management System (OHSAS, EMS & QMS) and ERCP (Emergency Response & Control Plan).

Site/ Construction support and advising site technical queries, Site inspection/ coordination, site acceptance/ handover, defining site safety requirements.

Familiar with several international codes & standards i.e. UAE Fire Code, NFPA, API, ANSI, CCPS, BIS, IP,

Alberta Fire Code, BP-GP, Total-GS, Shell-DEP, Chevron CEP, Saudi Aramco SAEP, KOC standards, ADNOC

COP’s, Qatar Petroleum specifications, DNV, IBC, NBC, OISD, TAC & PESO for process safety design.

Software Skills

DNV – PHAST, SAFETI, Pipenet, AUTO CAD, Auto Desk, Navis Work, PHA Pro, MS Office.

Work Experience Details

SNC Lavalin, U.A.E. (2016 – Present)

Sr. Loss Prevention Engineer,

Projects: -

Qatar Petroleum (QP) FEED for New Effluent Water Treatment Plant for NGL at Mesaieed, Qatar.

Qatar Petroleum (QP) EPIC for telemetry system replacement/upgrade for MM & BH fields wellhead jacket and realtime data transmission to onshore, Qatar.

PMC service for EPC Project of Moveyeid Gas Storage Project (Phase-2), SNOC, UAE.

Concept & FEED Services of Umm Al Dalkh Early Production, ADNOC Offshore, UAE.

FEED for Umm Shaif Long Term Development Plan – Phase 1 (9 Offshore Platforms), ADNOC Offshore, UAE.

HAZOP secretary for GPS Chem Oil Storage Tanks Complex, Truck & Jetty Loading & Unloading facilities, GPS Chem Oil Terminal, Fujairah, UAE.

PHA, HAZOP & SIL secretary for Abu Ali & Khursaniyah Gas Plant Complex, Berri Gas Project, Saudi Aramco.

UPPER ZAKUM (UZ-750) HSECES Identification, Performance Standards Enhancement, Job Plan Alignment and GAP Analysis of Commissioning Procedures for Central, North, South & West Islands, ADNOC Offshore, UAE.

Detail Engineering for the Hook-up of New Offshore Wells EB-53, WD-3 & WAG system at GIP, Bunduq Company Limited, UAE.

Qatar Petroleum (QP) FEED for New Crude Oil Storage Tank and Associated Facilities at Halul, Qatar.

Saudi Aramco, Master Gas (MGS) System Expansion Phase-II Pipeline Project (BI-10-01810). EPC by Atkins & ARKAD, Saudi Arabia.

Saudi Aramco, Master Gas (MGS) System Expansion Phase - I Booster Gas Compression Stations (BGCS-3&5) and Phase II (BGS-1) Projects, Contract # 660******* (OOK) & 660******* (IK), Job # 10-012**-****, EPC by Atkins & SEPCO, China.

ADAC & Transco PMC Services for Detail Engineering for 132/22kV CUP-2 Airport Substation Project.

ADNOC Distribution Detail Engineering for Design of New Gasoil Storage Tanks at ADNOC Dow Harbor Terminal.

Syncrude Canada Ltd. Feasibility/ Conceptual Study for Design of Automatic Fixed Fire Suppression System for Bitumen Storage Tanks.

Activities carried out for all above projects:

-Project HSE Plan.

-Fire & Gas Detection, Fire Protection & Fire Suppression Design Basis/ Philosophy.

-Fire water demand calculation & hydraulics reports for oil & gas plants & buildings.

-Steady state hydraulics, layout, isometrics & PID’s for network, spray/ sprinkler system.

-Guideline for Inert gas fire suppression system gas.

-Design of fire detection & alarm system.

-Firefighting equipment, personnel protection, escape route & safety signs layout for plants and buildings.

-Life safety & firefighting equipment, safety signs & fire detection system specifications & datasheets.

-Fire Proofing & Hazardous Area Classification Drawing.

-Fire strategy, fire rating & escape route drawings for buildings.

-Flare/ Vent Dispersion & radiation Study.

-Safety & Firefighting Equipment MR/ MTA, MTO, Vendor document reviews & TBE.

-HSECES Identification, Performance standard & GAP Analysis of Commissioning Procedure.

-Review of detailed EIA & HSEIA Reports inclusive of PHA, QRA, FERA, EEERA, ESSA, EIA scoping, EIA Screening Report, OHRA, Bow-Tie Workshop sheets & Reports for developing the Performance Standards for Upper Zakum (UZ-750) Project, ADNOC Offshore.

-Ensuring the compliance of government environmental regulations in the projects such as combustions from flare, compressors, GTG, generators etc. for environmental approvals from local authorities.

Proposal Undertaken:

FEED Services for Hail & Ghasha Sulphur Handling at Ruwais Sulphur Facilities, ADNOC GAS PROCESSING.

ENOC Detail Engineering for Fire Risk Assessment of Jebel Ali Refinery Expansion Project.

Abu Dhabi Gas Development Company Limited (Al Hosn Gas) Conceptual study for Hail & Ghasha Project – HSEIA Study for Artificial Islands, Abu Dhabi, U.A.E.

Saudi Aramco Detail Engineering for Hawiyah & Haradh Projects (Package 1, 2 & 3).

Saudi Aramco Detail Engineering of King Salman International Complex for Maritime Industries and Services, Maritime Yard, Ras-Al-Khair.

Petrofac International Ltd. & CCC, U.A.E. (2015 –2016)

Loss Prevention Engineer (Safety Lead Engineer & Lead Coordinator)

Projects:

Kuwait Oil Company (KOC) Detail Engineering for Lower Fars Heavy Oil Development Program Phase -1.

Activities carried out:

-Qualitative Risk Assessment Report Review & HAZID for support complex and Township.

-Design of Fire Fighting facilities for support Complex.

-Fire water demand & hydraulic calculation of fire water network for Township.

-Definition of applicable codes & standards like NFPA 101, NFPA 5000, NFPA 551, NFPA 20.

Technip, India (2012 – 2015)

Sr. HSE Design Engineer (Safety Lead Engineer)

Projects: -

Oil and Natural Gas Corporation Limited (ONGC) Detail Engineering for Onshore Terminal for VA & S1 Development Project, KAKINADA (Gas Processing Terminal).

EPC for Reliance India Limited Detail Engineering for Benzene Recovery Unit Project, Jamnagar, Gujarat.

EPC for Reliance India Limited Detailed Engineering for Off-Gas Cracker Project (ROGC), Jamnagar, Gujarat.

Petronet LNG Limited Feasibility Study for Petronet LNG Terminal, SIKKA, Dahej, Gujarat.

Abu Dhabi Oil Refining Company (TAKREER) FEED for Ruwais Refinery – FEED for an upgrade of Furnaces.

EPC for Cairn India Limited FEED ITT Package for Mangla Upgradation Project (Oil Processing Terminal).

EPC for Cairn India Limited FEED ITT Package for Raageshwari Field Development Project (Gas Processing Terminal).

IPIC FEED & Detail Engineering for Fujairah Refinery Project, Fujairah, UAE.

Indian Air Force PMC services for FEED & Detail Engineering for Design & Construction of Infrastructure for MICA Missiles Maintenance and Storage.

Activities carried out for all above projects:

-Fire Protection, Suppression system & Fire and Gas Detection concept sketches/layout/ philosophies.

-Passive Fire Protection Layout/ Specifications/ Philosophies.

-Fire Water Demand Calculation & hydraulic calculation of fire water network / spray & sprinkler system/ curtain system including design of pumping system.

-Firefighting equipment, personnel protection & safety signs layout.

-Fire Proofing & Hazardous/Electrical Area Classification Drawing.

-Layout, isometrics & PID’s for fire water network, fire water pumping system, deluge & sprinkler system.

-Design of Fire Detection Alarm System for plants & buildings.

-Preparation of Fire & Gas Cause & Effect Chart.

-Preparation, participation & review of safety studies.

Proposals Undertaken:

Petronet Detail Engineering for LNG Regasification at Dahej, Gujarat.

ONGC Offshore Detail Engineering for Heera Re Development Platform (HRD, Phase II), Mumbai.

ONGC Detail Engineering for Mehsana Gas Gathering Station Onshore Project at Mehsana, Gujarat.

L&T Valdel Pvt. Ltd., India (2011 – 2012)

HSE Design Engineer

Projects: -

PTTEPI Detail Engineering for PTTEPI Offshore Project, Myanmar.

ADMA OPCO FEED Verification & Proposal for UMM-LULU Full Field Development Project, Phase –II.

Activities carried out for all above projects:

-Develop Safety Concept/Philosophy.

-Hazardous Equipment Schedule/ Hazardous Area Classification.

-Escape routes and firefighting equipment’s layouts.

-Design of Fire Water Spray system using PIPENET software.

-Flare stack Thermal Radiation and Dispersion Modelling using DNV-PHAST Software.

-HAZOP & HAZID workshop facilitation/ coordination & closeout report.

-Offshore related Safety Studies participation & review.

Technip KT India, India (2010 – 2011)

PGEIT, HSE Design Department

Project: -

Indian Oil Company Limited IOCL, Mathura, Detail Engineering for Propane Recovery Unit.

Activities carried out:

-Develop Safety Concept/Philosophy.

-Fire Water Demand Calculation

-Hydraulic Calculation for Network & Spray System Design for PRU Unit using Pipenet.

-Firefighting equipment, personnel protection layout.

Indian Oil Company Limited IOCL, Mathura, PGEIT

Activities carried out:

-As Built Verification of Mathura Refinery Firefighting equipment’s, Hydrant & monitor system.

-Review Work Permit System.

-Assist in Safety Induction Training.

Contact this candidate