CURRICULUM VITAE
ade9gi@r.postjobfree.com /+91-961*******
EXECUTIVE SUMMARY:
Recently worked in “RADISE INDIA PVT LTD (Smart Structures.com-Civil Engineering Company)” Hyderabad, working in Electronics LAB section as Hardware Engineer.
Previously worked in “YASH FANS and APPLIENCES PVT LTD” Hyderabad as Electrical and Electronics Engineer in R&D Division.
Worked as Assistant Professor in “MALLAREDDY COLLEGE OF ENGG” Hyd in ECE Department.
Worked in “GE INDIA EXPORTS PVT LIMITED” Hyd- It is a part of “GE ENERGY MANAGEMENT and INDUSTRIAL SOLUTIONS” Worked as ELECTRONICS LAB TECHNICIAN (TECHNICAL).
Worked as GRADUATE ENGINEER APPRENTICESHIP TRAINEE in ELECTRONICS CORPORATION OF INDIA LTD (ECIL) Hyderabad in the field of Testing, Troubleshooting, Data collection of the PCB’s, SMSP’s and DC Power Supplies Control Panel Modules of “NUCLEAR POWER PLANTS”.
Worked as (O&M Engineer) Operation and Maintenance Engineer of 11KV Synchronous AC Motor by using SCADA Control Software.
TOTAL WORK EXPERIENCE: 6+ years
Relevance Experience: 4.6+ Years
Company: RADISE INDIA PVT LTD, HYD
Designation: ELECTRONICS HARDWARE TEST ENGINEER
Projects Under Gone/Technical Operations:
As Hardware Engineer:
Testing and Troubleshooting the ongoing Project Electronics Circuit Boards (sensor boards)
Testing the Firmware Applications like Smart Pile Acquisition, Smart Pile Monitoring, Smart Pile Suite, Smart Pile Review, Smart Pile Inspector Applications using the Hardware Setups.
Problem Analysis, Troubleshooting the Electronic Circuit Boards (PCB).
Rolls & Responsibilities:
As Lab Support Engineer and in charge: Hardware Materials and Lab Related Items handling, Procurement, Store management and Electronic PCB Soldering Work, Test Setups, Email Test Request Generation.
Company: YASH FANS and APPLIANCES PVT LTD, HYD
Designation: ELECTRICAL HARDWARE TEST ENGINEER
Projects Under Gone/Technical Operations:
Designing and Development of Single Phase AC Motor Stators and all R&D Technical Operations of Single Phase AC Induction Motors of Ceiling Fans
Quality Check and Quality Control and Production related Operations
Knowledge on BLDC Motors (Brush Less DC Motors) Technology
Rolls & Responsibilities: Testing Engineer in the field of Designing and Development of Single Phase Induction Motors (Ceiling Fans), As Technical Engineer R&D Involving in all New Developments.
Company: MALLA REDDY COLLEGE ENGINEERING, HYD
Designation: ASSISTANT PROFESSOR
Rolls & Responsibilities: Worked as Assistant Professor in ECE Department for Electrical Related Subjects.
Company: GE INDIA EXPORTS PVT LTD, HYD
Designation: ELECTRONICS HARDWARE TECHNICIAN (Technical)
Projects Under Gone/Technical Operations:
Testing, Troubleshooting, Sensor Characterization, Calibration, Analysis of Industrial And House Hold Circuit Breaker Components and Electronics Breaker Modules
EOL (Electronic Over Load Relay System) Current Coils Current Injection Testing’s
Trip Circuits Boards Power Up, V&I Injection Testing’s
RMS Electronic Boards Trouble Shooting & Power up Testing
Narrow Frame IMPULSEs Test and Dielectric Test, TITAN and GACB Breaker VALIDATION Test
AFCI Breakers (ARC FAULT CIRCUIT INTERRUPT): Push to Trip Tests, Under Voltage &Over Voltage Tests, RS, RE, CS, ESD, EFT, SURGE, DME, Ramp up & Ramp down, ALT Tests and Troubleshoot, High Voltage Dielectric Sources
Linearity testing of current transformers at different current ratings, ct saturation testing or high current testing, CTs power up test,
Linearity testing of Rogowskis at different current ratings, Rogowskis saturation, stray field test, mutual tests, gear R&R test for Rogowskis, gtu trip unit tests, low current injection tests,
ALT Testing for AFCI Breakers, RMS Boards, Trip Units...
Rolls & Responsibilities: As an Electronics Lab Technician-Trouble Shooting, Calibration, Problem Analysis, Validation, and Sensor Characterization, Auxiliary life Tests.
Company: RMC LTD, DLIP, WARANGAL
Designation: O&M ENGINEER
Projects Under Gone/Technical Operations:
Rolls & Responsibilities: As Operation and Maintenance Engineer for 11KV AC Induction Motor at DLIP
Company: ELECTRONICS CORPORATION OF INDIA PVT LTD (ECIL), HYD
Designation: GRADUATE ENGINEER TRAINEE (GET) (Technical)
Projects Under Gone/Technical Operations:
SMPS and DC Power Supply Voltage testing’s
Voltage Set Up Testing, Continuity Testing Resistance Testing of CRCS Systems
Testing, Calibration and Trouble Shooting of Electronic Boards of Radiation and Data Acquisition System (RADAS) And CRCS
Knowledge & Understanding of Schematics Wiring Diagrams for Heating System, Vapour Generating System, Process Chamber System and Vacuum System for Uranium Clean Up Facility (UCUF) Project.
Testing, Calibration and Trouble Shooting of Boards at Radiation Data Acquisition System (RADAS).
Involved in Installation and Commissioning of CRCS CONTROL PROJECT at Kakrapara Gujarat
Rolls & Responsibilities: As a Trainee Engineer- Knowledge and Understanding of Schematics and Wiring Diagrams of Control Panels, Testing, Trouble Shooting, Calibration, And Validation, Of CRCS and RADAS Systems.
ELECTRONICS LAB RELATED OPERATIONS:
Hardware used for the Tests:
Communication Devices like Pick Kit, RS 485, RS 232 and Input and Output Devices
Measuring Instruments and LAB Equipment’s:
Oscilloscope, Signal Generators, Power Analyzers, Digital Multimeters, Clamp meters, AC and DC power Supply Sources, Data Logger, Humidity Chambers, EMI & EMC Test Equipments…etc
Knowledge on Understanding Schematics and Block Diagrams of the Electronic Circuits, Making of Prototype PCB Electronic Board Models
Operations of Low and High Rated Voltage and Current Sourcing Equipment’s
Material Procurement and Store management, Preparing Test Reports and Test Charts
Having Knowledge in EMI, EMC Technology, ESD, Dielectric Tests (Up to 4KV), Surge Voltage Testing’s (Up to 6KV).
SOLDERING TECHNOLOGY:
Microscopic IC Soldering Technology Soldering of all Types of Small Package SMD Electronics Components 40 Pin, 20 Pin IC’s on PCB’s, Leaded (STH) and small Package IC’s
Understanding, Knowledge on Electronics Circuit Board Schematic Drawings, Electronic Devices and SMD Packages types and Online Purchasing
Electronic PCB (Printed Circuit Board) Testing, Trouble Shooting, Analysis and Making Proto Type Circuits Boards as per the Schematic Diagram
AREA OF INTEREST
Product Design & Development, Production Engg, Quality Check and Quality Analysis, Store management and Procurement, Project Management, O&M, and Research & Development in Electrical and Electronics Systems, Equipment Installation and Commission, Power Electronics, Switchgears and Electrical Product Development, Sales & Marketing, Contracting.
SOFTWARE SKILLS
MS office Word, Power Point, XL
PCB Designing Software like Online Easy EDA, Eagle CAD
Knowledge on PSPICE, MAT Lab Simulation
Internet Applications, Electronics Devices Procurement Sites Like
Digitech.com, Mouser.com, Element14.com and Local Markets
EDUCATIONAL QUALIFICATIONS:
B. Tech (Degree) : EEE (group)-SRR Engineering College (JNTUH)-2010-Distinction & First Division
10+2 (Inter) : MPC (group)-Sri Chaitanya Jr Clg-2006-First Division
SSC (10th) : JBS High School-2004- Distinction & First Division
ACHIEVEMENTS:
Participated in inter zonal “kabaddi tournament” during the college competition.
Participated in Mandal & District Level zones “kabaddi tournament” during the schooling competition
PERSONAL DETAILS : Umashankar B,
H No: 12-15- 797/4, MK Nagar, OU Arts Clg, Secunbd – 500007
MARRIAGE & LANGUAGES Known : Unmarried & English, Hindi, Telugu (Mother Tongue)
HOBBIES : Playing cricket, listening to music
STRENGTHS : Quick Learner, Smart Work, Self-Motivated
Name: Uma Shankar B
Ph. No: +91-961*******
Sign: