Mechanical Engineer Maintenance

Address: *D/*, Saraswathi Illam,

Kamarajar street,

Vivekananda nagar,

M.K.Kottai, Trichy-11.

Contact: +91-952*******; +91-900*******

Email: **********@*****.***

DHEENADHAYALAN M MECHANICAL ENGINEER

OBJECTIVE To be a skillful, resourceful and innovative person with a focus on the organization goals.

SKILLS &

ABILITIES

HSE Management

Responsible for adhering into COMPANY’S policies & producers most specially to the permit systems & safety Requirements.

To Ensures HSE requirements are being adhered into & ensure safe, clean & efficient service in exercise & maintained at all times. Scope Management

To Ensures compliance with Maintenance Schedule/Plans.

To Ensures proper execution of the work.

Time Management

Timely execution of the work.

Contributes to the development of work schedule other than the current maintenance work or any other work that may be provided by the COMPANY to meet operational needs.

Supervises work in accordance with the work schedule. Cost Control

Responsible for the proper use of equipment, materials & resources. Team Management

Focuses team on achievement of maintenance activities as well as timely execution of unplanned activities such as repairs and/or modification due to system’s breakdown.

Maintain good working relations with the team as well as to other personnel to ensure proper execution of work.

Responsible for conducting Tool-Box meeting & other co-ordination. Page 2

Risk Management

Evaluate risks in all aspects of the work.

Responsible for the conducting JASs and work safety documentation.

Monitors the closures of all identified risks and opportunities. EXPERIENCE COMMISSIONING SUPERVISOR – GRAND HYATT HOTEL (360 MALL-TENNIS COURT PROJECT), AHMADIAH-ECOVERT-FM, KUWAIT

[January’20 - Present]

RESPONSIBILITIES:

An Assistant of Commissioning manager supporting as a Commissioning Supervisor to perform required below activities.

Supporting to gather details from HVAC, Electrical, Plumbing, Fire Protection, Fire Detection and Gas Detection Teams from Individual contractors such as BMB, HYDROTEK, GCG and EN-VISION to Commissioning Manager – AHMADIAH.

Supporting to create all documentations works such as Preparations of Commissioning Plan, Commissioning Activity sheet, Projected Organization Chart, Method Statements, Commissioning Program, Checklist for O&M Manuals, Commissioning Handling over Matrix.

To create Daily basis Documents gather from Direct Site Visit for Site Constraints which restrict to do Commissioning between the Projected Dates of Each Contractors work.

Supporting Commissioning and Pre-Commissioning Activities Like, Leak A

And Pressure Test Perform Witness, Equipment Inspection, Flushing, Chemical, Mechanical Cleaning Perform Witness, Strainers.

Inspection Of Equipments And Process Flow Lines Meet As Per The Design Before Boxing Up.

Inspection Of Trays And Its Arrangements, Following The System Cleaning, Pressure Test And Commissioned The System.

Experienced And Knowledge In Pressure Testing (Hydro And Pneumatic) Of Lines And Vessels

Overseeing All Areas of the site and Commissioning New Equipment, Regularly Attend the Meeting Regarding the Safety, Environmental and Production Targets in All Fields As well As Trouble Shooting. Sampling and Placing Of Work Orders.

Gas Testing, Chemical Handling, Confined Space Entry and Atmospheric Monitoring.

Page 3

Checking the Construction of Piping Equipment According To the Process Flow Diagram, Instrumentation Diagram Clearance & Mechanical Clearance.

Making Of Punch Point List Rectification of the Point in Co-Ordination with Maintenance.

Inspecting All The Utility And Their Safe Commissioning. TAB & MEP SUPERVISOR – NATIONAL BANK OF KUWAIT (NBK - PROJECT), ECOVERT-FM, KUWAIT

[November’20 – January’20]

RESPONSIBILITIES:

Supporting Testing and Balancing Team for Air Balancing As a Supervisor Record Tests and Results.

As a TAB team need to check and balance the each floors and Emergency EXIT Floor Steps.

As per TAB works to check and measure the Test values by using Anemometer and Hood Meter.

Also Supporting Maintenance Team to Evaluate & Resolve Concerns Related To MEP as a MEP Supervisor.

Working with vendors where appropriate to resolve technical dispute between vendors on installed equipment during DLP (Defect Liability Period).

Supporting the consultant for the electro-mechanical testing & commissioning activities to take over the asset and reporting snags by comparing the actual installation with the design specification.

Supporting Fit out Department in issuing fit out competition certificate to the tenants in regard to MEP.

Listing all electrical assets with specifications, operational Setting & design parameter to feed the content to CAFM for operation and maintenance.

Planning and monitoring preventive maintenance of more than 70000 assets with available work force.

Reporting the predictive maintenance to be done on major equipment to avoid sudden failure.

Troubleshooting and preparing failure investigation report identifying the root cause of failure and remedial action.

Attending supplier’s Operations & Maintenance Training.

Monitoring sub-contractor’s activities, issuing work permit as per rules and policy.

Page 4

Identifying risk & critical asset of project and addressing it to the Management with rectified advice.

P&I SURVEY JUNIOR ENGINEER – EQUATE ( PETROCHEMICAL PLANT PROJECT), ECOVERT-FM, KUWAIT:

[September’20 – November’20]

RESPONSIBILITIES:

Supporting Technicians and Helpers from the team of Reliability and Maintenance Department.

Before guiding them to do their work by need to go site for Survey to Identify Equipment’s Position and names.

For Identify Equipment details need to read and Analysing the P&I Diagrams bases on Various Zones.

Need to go for survey zones such as Utility Area, Furnace Area and Ethylene Area with full safety precautions to enter site and need to survey using P&I Diagram.

Supporting Piping, Sticker and Tags Marking Team by Surveying Piping and Instrumentation (P&I) Plant Using P&I Design.

And to submit recorded data to respective teams for their works. SUBSTATION & MEP SUPERVISOR – LFHO PROJECT-KOC-ABDALLY-CENTRAL PROCESSING FACILITY BUILDING AND SUBSTATIONS, ECOVERT-FM, KUWAIT

[March’20 – September’20]

RESPONSIBILITIES:

Supporting operations and maintenance team to evaluate and resolve concerns related to MEP and working with vendors where appropriate to resolve technical dispute between vendors on installed equipment during DLP (Defect Liability Period).

Supporting the consultant for the electro-mechanical testing & commissioning activities to take over the asset and reporting snags by comparing the actual installation with the design specification.

Supporting Fit out Department in issuing fit out competition certificate to the tenants in regard to MEP.

Listing all electrical assets with specifications, operational Setting & design parameter to feed the content to CAFM for operation and maintenance.

Planning and monitoring preventive maintenance of more than 70000 assets with available work force.

Page 5

Reporting the predictive maintenance to be done on major equipment to avoid sudden failure.

Troubleshooting and preparing failure investigation report identifying the root cause of failure and remedial action.

Attending supplier’s Operations & Maintenance Training.

Monitoring sub-contractor’s activities, issuing work permit as per rules and policy.

Identifying risk & critical asset of project and addressing it to the Management with rectified advice.

EDUCATION B.E., MECHANICAL ENGINEER – K. RAMAKRISHNAN COLLEGE OF TECHNOLOGY – ANNA UNIVERSITY BOARD – TRICHY (2014-2018)

First Class - CGPA = 8.3 out of 10

HSE – SACRED HEART HR. SEC. SCHOOL, TRICHY (2014)

HSE PERCENTAGE = 85.5 %

SSLC – SACRED HEART SEC. SCHOOL, TRICHY (2012)

SSLC PERCENTAGE = 91.5 %

WORKSHOP

ATTENDED

Attended workshop on “Quadcopter Technology “at K. Ramakrishnan College of technology, Trichy.

Attended workshop on “NDT” at K. Ramakrishnan College of technology, Trichy.

Attended workshop on “Solar Vehicle Design and Manufacturing” at VIT, Vellore.

ACHIEVEMENTS Attended a SOLAR VEHICLE CHALLENGE EVENT at Gujarat and won 5th place in all over India.

PROJECT Exhibited a project on DESIGN AND FABRICATION OF SOLAR POWERED VEHICLE at K. Ramakrishnan College of Technology, Trichy PAPER

PRESENTATIONS

Presented a paper entitled Design and Fabrication of Solar Powered Vehicle and secured first place at Mam College of engineering, Trichy.

Presented a paper entitled Stealth Technology at Care College of engineering, Trichy.

Presented a paper entitled Heat Exchanger and secured first place at university college, Anna university, Pattukottai.

Page 6

CO-CURRICULAR

ACTIVITIES

Successfully participated and completed the NPTEL online course.

Acted as a member of SAE INDIA during 2015-2016.

Acted as a member of 5S and cultural functions organizer & helper in the college.

Acted as a School Pupil Leader in School Level during 2013-2014. SOFTWARE

KNOWN

Auto CAD

Solid works

Catia

Basics of C++

Basics of Ansys

PERSONAL

DETAILS

Date of Birth: 20/11/1996

Languages Known: Tamil & English

Nationality: Indian

Passport No: S9965365

Passport Date of Issue: 16-10-2018

Passport Date of Expiry: 15-10-2028

SIGNATURE

(DHEENADHAYALAN M)

Contact this candidate