Engineer Safety

Dennis Jones

Plot no **/*, Yeshwantnagar, Behind Shirke building, Aundhe road,

Kusgaon Bd, Lonavala – 410401, Dist – Pune, India. Mobile: 009*********** / 009***********

Email: ************@*****.***

Skype id: denisj83

Professional Summary

To undertake a challenging career in oil & gas industry where I can utilize my broad training, skills and experience acquired over the past 14 years across the service industry and 10 years in key roles such as H2S/HSE engineer and H2S instructor. Multi-skilled and diligent team member, I possess strong technical and problem-solving skills with the ability to working at heights, in confined spaces, remote areas, and challenging weather conditions. Physically fit and energetic, I am most willing to complete a current Medical certificate and undertake Drug and Alcohol screening.

Core competencies

Hazard mitigation

JSA, JHA

Behavior based safety (BBS)

Risk assessment

Evacuation plan

PTW

Employee education/training

Site inspection

Documentation according to ISO 9001

Preventive maintenance

Breathing air compressors ( BAUER, COLTRI, MAKO )

Gas detection systems ( Detcon, MSA, Crowcon, Zellweger, Dragger, OTIS, RAE)

SCBA ( SCOTT, Sabre, MSA, Bullard, Sekur )

Professional Development

NEBOSH IGC certificate.

IWCF – Level 1 certificate.

Basic and Advanced technical course for BAUER compressors – Munich, Germany.

H2S instructor course OPITO approved – Doha, Qatar.

IADC Rig pass – Doha, Qatar.

Compressed gas cylinder safety – Doha, Qatar.

Electrical safety – Kazakhstan.

LOTO (Energy Control Awareness) – Kazakhstan.

Working at heights – Kazakhstan.

AUTHORIZED GAS TESTER – Singapore.

First Aid – Kazakhstan.

Defensive driving – Kazakhstan.

Employment history

November 2018 – Present QHSE Akbarys LLC, Kazakhstan. The major project as Lead H2S/HSE supervisor

KPJV (Kazakh Projects Joint Venture)

TCO (Tengizchevroil) – Tengiz field drilling sites Key Duties

Monitoring toxic gas detection system installed for the perimeter of the 3GP/3GI plant sites.

Coordinating with emergency evacuation team during evacuation.

Preparing reports about daily drilling activities and reporting directly to the OEM.

Maintaining the H2S equipment on site and making sure all are at optimal state.

Troubleshooting, maintenance of gas detection systems and breathing air compressors.

Weekly reporting of all colourimetric stain tube usage by QTY, date, time& operation.

Organized safety drills at prescribed times.

Preparing and issuing PTW and gas permit.

July 2012 – March 2018 Rutledge Omni services PTE LTD, Singapore. www.rutledgeservices.com

July 2017 – March 2018 Kurdistan region of Iraq

The major project as Lead H2S/HSE engineer

DNO Iraq AS – Drilling sites.

DNO Iraq AS – Production and Loading facility.

Key duties

Preparing Monthly and Weekly Safety Statistics report for all projects.

Taking care of remedial measures at work site and advising management on-site safety rules and regulations.

Conducting Daily, Weekly, Monthly Safety Meeting.

Conducting Daily Tool Box Meeting and Safety briefing.

Taking part in the safety inspection as per plan schedule by Client.

Implementing the safety procedures to the contract employees.

Identification of occupational health & safety hazards.

Root cause analysis and corrective action.

Preparing and issuing PTW and gas permit.

Preparing reports about daily drilling activities and reporting directly to the OEM.

Maintaining the H2S equipment on site and making sure all are at optimal state.

Troubleshooting, maintenance of gas detection systems and breathing air compressors.

Weekly reporting of all colourimetric stain tube usage by QTY, date, time& operation.

Organized safety drills at prescribed times.

Increased HSE behavior observations by 50%

Conduct safety meetings, tailgate meetings, lesson learned sessions and work permits systems.

Ability to oversee the Safe Operations of a project at any level.

Conduct timely walk around of sites to assist all contractors with compliance issues, behavioral safety observations and corrected actions to ensure safe operations.

Carry out periodic monitoring and reviews of work systems to ensure safe systems of work at all times.

July 2012 – April 2017 Kazakhstan – Tengiz oil field The major project as Expat H2S engineer / Field HSE engineer

Tengizchevroil (TCO ) – Drilling sites and Plant Key duties

Coached, mentored local staff about usage of H2S equipment and reporting according to ISO 9001 standards.

Implementation, enforcement, and compliance audit related to standards such as ISO 14001, IS0 9001, OHSAS 18001.

Work close with the site supervisor to ensure daily and special task JSAs and Risk Analysis are completed that include hazard indemnification with corrected actions noted.

Preparing Job Hazard Analysis (JHA) with and for field men with respect to scope of job.

Ensure workers are daily informed, instructed and trained on the job to be done.

Maintaining and modifying gas detection system and alarms according to client requirements.

Repaired breathing air compressors and performed preventive maintenance on compressors present on rig site.

Performed weekly air quality test for compressors on rig & plant sites.

Performed calibration of multi-gas and fixed gas detectors (Detcon, Dragger, MSA, RAE) on site.

Maintained ESIP (Engineered shelter in place) with HVAC, F & G systems.

Bi-annual reporting to address the validity of all certificates for all lifting equipment/subs points for cascade units as well as provided slings.

Maintained all documents including MSDS, AQT, Calibration, Drill reports for annual audits performed by client HSE.

Provided onsite induction to new personnel/crew arrival on rig site and getting them familiar with the rig contingency plan.

Trained ERT members for search & rescue during H2S emergency drills. February 2011 – May 2012 Total Safety LLC, Dubai.

www.totalsafety.com

Feb 2011 – May 2012 Rumaila oilfield, Basra, Iraq

Major projects as H2S safety supervisor

Exxon Mobil production sites.

Schlumberger rigs.

DQE & Gaz Prom rig sites.

Key duties

A routine check on the daily basis of all air stations to assure that the pressure on the system is as according to standard practice.

Inspected each assigned breathing apparatus for correct location readiness and cleanness.

Ensured the breathing apparatus is easily accessible to anyone trying to gain access to it in event of an alert.

Checked gas detection system on daily basis to assure that they are in good working order.

Ensured being at the shale shaker with an SCBA and colourimetric tube detector and tubes to monitor all bottoms-up when encountering any possible H2S bearing zones at trips, drilling breaks well flow and other moments that there are indications of possible problems with the well.

Ensured being at rig floor during all core barrel retrievals until completion.

Monitored all arriving crew returning to the site for clean-shaven faces.

Maintain readiness of breathing air compressor by running for 10 to 15 minutes per day and log usage.

March 2008 – January 2011 Solas Marine Services Co LLC, Dubai. http://www.solasmarine.com

Clients handled

Shell Petroleum, Qatar.

JAPEX, Libya.

Qatar Petroleum and Qatar Gas, Qatar.

SAUDI ARAMCO, Kingdom of Saudi Arabia.

ADMA-OPCO (Abu Dhabi Marine Operating Company), Abu Dhabi.

British Petroleum, India.

Major projects as an H2S technician

Rig Noble Joe Beall (Shell, North field, phase 2) Qatar; 5 November 2010 27 December 2010.

Rig Noble Joe Beall (Shell, North field, phase 1) Qatar; 21 July 2010 – 21 September 2010.

Rig GSP Saturn (Sea Dragon Oilfield), Libya; April 2010 – 30 June 2010.

DSV Normand Fortress (Qatar Gas Field), Qatar; 10 November 2009 – 21 December 2009.

Hyundai Derrick Barge HD 1000 Barge (Umm Shaif Field), Abudhabi; 16 April 2009 – 10 September 2009.

McDermott - Derrick Barge DB 16 (Safaniyah, Manifa field) Saudi Aramco, Kingdom of Saudi Arabia; 15 March – 12 April 2009.

Swiber Supporter – Diving vessel British Petroleum (Panna Field), India; 1 March – 14 March 2009.

Hyundai Derrick Barge HD 1000 Barge (Umm Shaif Field), Abudhabi; 20 June 2008 – 3 January 2008.

Key duties

Serviced breathing air compressors. (BAUER- Verticus 5, Mariner 320 E, Mako)

Carried out air quality test with MSA tubes for air loop system.

Serviced breathing apparatus, SCBA, EEBA, ELSA. (Sekur, Dragger, Sabre)

Servicing of Fixed, Portable and Personal gas detectors.

Installed breathing air cascade system.

Installed gas detection system.

Calibration of gas detectors.

Training all the onboard crew regarding H2S, donning of B.A sets and emergency procedures. July 2007 – February 2008 Detection Instruments (I) Pvt Ltd, Mumbai. Service engineer

Key duties

Repairing of gas control cards, transmitter cards, detectors and calibration of the gas detection system.

June 2006 – June 2007 CMS traffic systems (I) Pvt Ltd, Mumbai. Field engineer

July 2004 – March 2006 Blue chip systems

Service engineer

June 2003 – June 2004 Vishay components India Pvt Ltd, Pune. Education

Diploma in Electronics and Radio Engg. (DERE) passed with (71.28%) first class with distinction from Cusrow Wadia Institute of Tech, Pune – India, May 2003.

Higher Secondary Certificate (HSC) with second class D.P Mehta Junior College, Lonavala – India, Feb 2000.

Secondary School Certificate (SSC) with second class Don Bosco High School, Lonavala – India, March 1998. Personal details

Nationality – Indian

Date of Birth – March 25th, 1983

Marital status – Married

Hobbies – Motorcycle riding

Contact this candidate