Design Engineer Engineering

Ramanadhan.A.V Door No ***,

Amogha appartment

E mail : ***********@**********.*** Rock Hills colony,

Contact no: +91-994******* LB Nager,

Hyderabad - 500068.

Objective:

To be placed in a reputed company and to acquire higher position in the field of design engineering.

Attributes:

Working Experience in hydraulic & Pneumatic Gate valve actuator (API 6A, 6D, 17D).

Working experience on surface & subsea Choke valve, manual & actuated gate valve.

Surface Wellhead & Xmas tree components, subsea frame secondary module, flow loops, quarter turn ball valve actuators, CMIV valves, Tubing Hangers.

Sales order handling, quotation work handling.

Ability to work & lead the team and work under pressure.

Working experience in AutoCAD, Inventor, Math CAD

Knowledge in Unigraphics, PRO-E, & ANSYS

Working experience in Team center & SAP (BOM and documentation)

Knowledge in GD &T, Tolerance stack-up Calculations, stress calculations.

Preparing markups for project requirements, guiding team, reviewing drawings, part reports.

Educational Qualification:

COURSE

INSTITUTION

BOARD/

UNIVERSITY

YEAR OF

PASSING

% OF MARKS

B.E

(Mechanical)

Noorul Islam college of Engg

Anna university

2007

75.3

H.S.C

S.M.R.V Hr secondary school

Tamil Nadu

State board

2002-2003

73.3

S.S.L.C

D.V.D Hr secondary school

Tamil Nadu

State board

2000-2001

85.2

Professional Experience:

2 YEAR OF EXPERIENCE IN TechnipFMC (June 2018 to June 2020)

Designation: Senior Design Engineer

Projects executed:

Designing of F500 NRSC/IRSC Subsea production, Water Injection Chokes, F200 NRSC Gas Lift chokes for projects ENI Merakes, Statoil Snoore, ENI CABACA, Conoco Phillips Brossa, TSEP II

Designing of F500 IRSC choke with LPMA actuator and short length CIRT for Energean Karish project for requirement.

Working experience on Subsea Frame secondary module, Flowloops, - Total Glendronach project

Designed ROV Panel, ROV interface for operating a needle valve with class II ROV interface, - Total Glendronach project.

10 YEAR OF EXPERIENCE IN CAMERON VALVES. (Dec 2007- Jun 2018)

Designation: ETCL Engineer III

Company Profile: Cameron manufactures surface & subsea wellhead & X-mas tree components, Valves and Actuators for the oil & gas applications. India office provides support in the design and development activities for products that are manufactured globally.

Working experience in products:

Designing of hydraulic & pneumatic gate valve Actuators, through handling sales orders of customers.

Design files (Design calculation) creation of wire cutting, non-wire cutting Hydraulic Actuators, test fixtures, other Actuator accessories.

Working in experience in NCRs and FPRs to resolve field & plant issues cost effectively.

Designing of surface and subsea Choke valve body & Choke valve Assemblies, Trim technology, Choke sizing program, and Cv calculation

Performing Engineering calculations including stress evaluation, Tolerance stack-up analysis, MathCAD programs, supply pressure calculations in hydraulic and pneumatic actuators.

Creating assembly/Disassembly procedures for Actuators/actuator sub-assemblies, Chokes and its accessories.

BOM Management in SAP.

Installation, Operation, Maintenance manual (IOM) development for Chokes.

2D drafting, 3D modeling, layout drafting and assembling of valves, subsea and surface Chokes & Actuators components

Working experience on quarter turn ball valve actuators, CMIV valves, gate valve, CLRT, CCRT & SLCA.

Projects executed:

Designed 7” 10ksi NUB design hydraulic actuator for spring pre-load of 13,375 LBF with special adaptor ring to assemble with old design bonnet kit which is already in the field. customer: BP Azerbaijan

Developed new 4-1/16 10K, W/MHW70-RS-0400-D Actuator design with special Quick Coupling System Features. Customer: NUM

Developed 6-3/8 10ksi hydraulic actuator for 450 deg f service with reduced neck design of bonnet & environmental seals to work in higher temperature. Customer: Geodynamic, Australia

Worked on NCRs of hydraulic actuators to resolve issues with spring free length, nub design, actuator product failure issues.

Worked on material stack-up calculations in actuator, supply pressure requirement calculations, engineering standard procedures.

Designed 6-3/8" 5K (6.5K), SSV, FLS, API 6A hydraulic actuator with new bonnet design to hold duel stem packing seals.

Customer: STATOIL.

Developed new Actuator design layouts for MH70-RS-0425-C. MH70-RS-0650-C, MHW70-RS-0900-F customized sizes based on supply pressure variation.

Designed new test fixture for testing hydraulic actuators.

Developed 4” & 5” hydraulic actuator for ENI IRAC with design of new bonnet to hold braided graphite backup ring, packing retainer to comply API 6FA standards to work under high temperature condition.

Developed new manual override for 4” hydraulic actuator to operate actuator manually. Customer SPDC KOROAMA

Developed 6” hydraulic actuator with new fully clad bonnet with buried check valve design for the end user of STATOIL

Developed Wellhead equipments and Master valve for Geothermal Service with Casing programme 20” OD X 13-3/8 OD X 9-5/8” OD Casing for End user of STAR ENERGY

Developed new CC30, CC40 clad choke body with 4” ANSI 1500 RTJ integral inlet & outlet flange for customer PETROFAC

Conducted Choke sizing calculation to select the accurate choke & trim kit to ensure the flow characteristics for the valve flow coefficient of working conditions. End user Chevron Wheatstone

Conducted Finite Element Analysis On MA10 pneumatic Actuator Assembly. (Project Description: To determine any possible failure on individual parts such as upper casing, lower casing & diaphragm plate as a result of the input pneumatic pressure supply, axial thrust, spring reaction force in the Actuator using packages AUTOCAD, ANSYS).

Created Installation, Operation Maintains for subsea & surface chokes for customer BP Angola & Conoco Phillips.

Customers: STATOIL, CONOCO PHILLIPS, ONGC, PETROFAC, SAUDI ARAMCO, EXCON MOBILE, SHELL, NUM, NOC, PPL, STAR ENEGGY, CHEVRON, TODD ENERGY,

Valve Engineering Project:

Supported in creating standardized common MHWCS Design actuator for various gate valve bonnet assemblies with modified stroke adjusters.

Product development:

Developed new Position transmitter device operating arrangement in hydraulic actuator to perform gate valve throttling. Customer BP.

WORKED AT ON-SITE FOR SIX MONTHS IN CAMERON (HOUSTON) TEXAS, USA.

Mechanical Software Skills:

INVENTOR (Working Experience)

MODULES: Part modeling, Assembly, Detailing, Presentation, Piping

AUTOCAD (Working Experience)

PRO-E (Version 2000 i, 2001, wildfire, wildfire 2)

MODULES: Part modeling, Assembly, Detailing, Machining

UNIGRAPHICS (Version NX, NX2, NX3, NX4)

MODULES: Part modeling, Assembly, Detailing, Machining

MATH CAD (working Experience)

ANSYS (Working Experience of one project) (Version 8, 9, 10, 12.1)

Structural analysis, Thermal analysis, CFD, Vibration analysis

MECHANICAL DESKTOP

SAP (BOM DATA MAGEMENT) (Working Experience)

Team Center (BOM DATA MAGEMENT) (Working Experience)

College Academic Project:

DESIGN AND ANALYSIS OF PRESSURE VESSEL USING UNIGRAPHICS

& ANSYS

Curricular Activities:

Under took in-plant training in Roots Industries Ltd at Coimbatore

for a period of 10 days

Under took MATH CAD training in CAMERON ONESUBSEA Houston division.

Under took Learn six sigma, Quality Management System trainings in CAMERON

Under took Management Development Program at KCT Business School.

Under took six sigma training in CAMERON

Under took API SPEC Q1, 8TH Edition Implementers Program

Under took Internal Auditor Training Program.

Under took Ethics code of contact program in CAMERON.

HSSE Core member in CAMERON.

Member of institution engineers.

Personal Details:

Father’s name : A.R.Vijayan

Marital Status : Married

Age & Date of birth : 33 years & 02-12-1985

A.V.Ramanadhan

Contact this candidate