Paul Sosnowski

Senior Drafter SME * - IT-** and One Net sites

Summerville, SC

adcsek@r.postjobfree.com - 843-***-****

Over fourteen (14) years of experience in the Installation, technical design of various C4I communications systems and electronic devices, including various network routers, switches, and system intrusion protection devices. Through training, I possess an advanced knowledge of the principles of design, methods and techniques used in the fabrication of electro-mechanical components and extensive experience with associated equipment and systems. Over four (4) years' experience as Team Lead, providing leadership and direction for up to 40 employees including technicians, system administrators.

WORK EXPERIENCE

Senior Drafter SME 3

IT-21 and One Net sites - Charleston, SC -

2017-03 - Present

Computer Defense Systems Build 5

• Provided technical support, systems design and integration for CND systems for Increment 2 Build 5 installations for IT-21 and One Net sites - Bahrain IORNOC / TNOSC, Naples ECRNOC / TNOSC Norfolk UARNOC, Suffolk NCDOC. Includes Installation Design Plans and As Builts. Lead Drafter

Cambridge International Systems Inc - Charleston, SC - 2015-03 - 2017-03

Provide system design and technical support for Installation design plans to customer specifications for Guam, Bahrain, Naples, Djibouti among other Unnamed sites. Scientific Research Corporation - Charleston, SC - 2014-11 - 2015-03

Senior Drafter ISS Division

Computer Defense Systems Build 3 and 4

• Provided technical support, systems design and integration for CND systems for Increment 2 Build 3 installations for IT-21 and One Net sites - Bahrain IORNOC / TNOSC, Naples ECRNOC / TNOSC Norfolk UARNOC, Suffolk NCDOC. Includes Installation Design Plans and As Builts. Lead Drafter / Drafter IV - Shore Division

VT Milcom - Charleston, SC -

2004-09 - 2014-10

Joined VT Milcom as Lead Drafter in support of Air Traffic Control installations for Iraq.

• Created Installation Design Packages for ATC radar tower and control system sites at four locations in Iraq; Balad, Kirkuk, As Salyiah, and Al Saleem. SPAWAR -

2011 - 2014

Lead drafting team for drafting support of Navy Teleport System sites VT Milcom - Northwest, VA -

2010 - 2010

MONMOTH VA, WAHIAWA HI, RAMSTIEN GR, LAGO PATRIA IT, CAPODICINO IT, BAHRAIN, CAMP ROBERTS CA., FORT BUCKNER OKI.).

• Provided on site drafting support for Camp Lemonier, Djibouti, Africa TCF Optimization Phase II/III, as well as local base infrastructure (non-PDS and PDS) cabling throughout the camp.

• Provided drafting Support for CNDS installations - Naples, Norfolk, Suffolk, Bahrain.

• Provided drafting design support for TIMPO installations in Dod medical centers nationwide.

• Built and installed VIC systems (voice communications), MCTAG/OGPK Kits (gun turrets) for MRAPS.

• Provided on site drafting design and installation support of 35 projects at fob Shank, 45 projects Bagram, 12 installations Kabul, Afghanistan. Inside plant/Outside plant cabling infrastructure for base wide communications networks. (NIPR/SIPR)

• Provided on site drafting support and design for RFID tag system in Arifjan, Kuwait and Camp As Saliyah, Qatar.

• Provided on site drafting support of network cabling infrastructure for Centcom forward headquarters Al Udeid, Qatar.

SPAWAR - Kabul, AF -

2008 - 2010

• DOD Level III Drawings (TACOM) Prototype and production vehicles.

• DOD Level III Drawings for US Air Force C-17 Aircraft maintenance trainers

• DOD Level III Drawings (SPAWAR) C4ISR Installation design packages.

• Complete Installation design packages for EHF facilities, and AWS Systems South Pole.

• ISP and OSP IDP Drawings for Djibouti Africa, 2008-2010. Consulting Engineering Designer

Sterling Advantage - Charleston, SC -

2003 - 2009

Charleston, SC 2003 - 2009

Started Sterling Advantage as a design/engineering service company, to support tooling design needs of local customer, a former employer.

Consulting Engineering Designer

• Contract and consulting mechanical engineering and design. Provide Design and detail drafting of work holding fixtures for assembly (tools) to aid in welding Gas Turbine Fuel Injectors. Program Manager for Quality Control

Technical Solutions Group Inc - Charleston, SC -

2002 - 2003

procedures and implementation in support of contract deliverable of 10 vehicles to the US Army for testing.

Coast Guard Drafting Standards -

2000 - 2003

• Shore Installation Process Handbook Standards V2.1 -V4.0 (current as of Jan 2016)

• Installation Requirements Drawings Standards V2.0 (current as of Jan 2016)

• Coast Guard Drafting Standards, NAVSEA Drawing Standards, ONE-NET Drafting Standards

• ANSI Y 14 Standards, GD&T

• Shore Installation of Radomes for TIP Systems.

EQUIPMENT EXPERIENCE:

20 years In Cad operations including AutoCAD r10-2018, Bravo, CADAM, CADKEY, PRO-E, Solidworks, and also Manual Drafting for over twelve years (pre-cad) Nov 2018

Program Manager - Quality Assurance

Parker Hannifin Corporation - Moncks Corner, SC -

2000 - 2002

Program Manager - Quality Assurance

• Provided initial quality assurance check and inspection of Mine Resistant Ambush Protected Vehicles for First 10 contract vehicles to US Army (Buffalo MRAP).

(company later became known as Force Protection).

Parker Hannifin Corporation, Moncks Corner, SC 2000 - 2002 Joined Parker Hannifin as Tooling Designer to support their newly relocated gas turbine fuel systems manufacturing facility in Moncks Corner.

Tooling Designer

• Provided design drafting and details for manufacture of tools to assemble and inspect Gas Turbine Fuel Injectors used in large scale power generation facilities. Also tooling to assemble and fabricate smaller Fuel Spray Bars and Fuel Injectors used in jet aircraft engines. (Rolls-Royce, General Electric, Alstom Power).

Tooling Designer

Siemens Automotive Corporation - Newport News, VA - 1999 - 2000

in support of manufacturing operations, at their Newport News fuel injector facility. Tooling Designer

• Provided design drafting for automated assembly and test of fuel delivery systems for automotive industry for four individual fuel injector assembly lines. Product Designer

AAI / ESI Corporation - Summerville, SC -

1998 - 1999

in support of Aircraft Maintenance Trainer design and build to the USAF C-17 program. Product Designer

• Provided design drafting for fabrication and manufacture of Aircraft Maintenance Trainers Product Designer

Con-Vel Inc - Summerville, SC -

1996 - 1998

to support the manufacture of new constant velocity joint drive lines at their South Carolina manufacturing facility.

Product Designer

• Provided product design drafting of constant velocity joint drivelines for commercial, military and aerospace applications (cv joints ranging in size from 1-1/2" diameter to 14" diameter). Tool Designer

Dynapower Stratopower Inc - N Charleston, SC -

1995 - 1996

N Charleston, SC 1995 - 1996

Joined Dynapower Stratopower as a tooling and gaging designer to support their high pressure pump manufacturing operations in North Charleston. Tool Designer

• Provided design drafting for fabrication of fixtures and gages to manufacture high pressure hydraulic pumps used in commercial, military and aerospace applications. Product Designer/Checker

Behr Heat Transfer Systems Inc - Charleston, SC -

1992 - 1995

in support of their radiator and heat exchanger manufacturing facility in Charleston. Product Design / Checker

• Provided product design guidance to team and checking of drawings for dimensional accuracy, completeness to customer specifications and manufacturing. (heat exchange systems, radiators, charge air coolers, oil coolers for automotive, commercial and military applications). Product Designer

Troy, MI -

1990 - 1992

of brakes for class 6, 7 and 8 trucks and commercial vehicles. Product Designer

• Provided design drafting of brakes and driveline system components for automotive, commercial and military applications. (Heavy duty brakes for class 6, 7 and 8 trucks). Product Drafter

JS McNamara Inc - Warren, MI -

1987 - 1990

in support of welding operations for big three automotive, was contracted out to Dyneer, TracTech next door for 5-6 weeks, (see length of stay above) due to extensive knowledge of manufacturing processes and procedures. Responsible for implementing revisions, and rebuilds to manufacturing tools to increase production. Maintained and developed manufacturing process drawings.

Tool Design / Manufacturing Process Engineering Technician

• Provided design drafting of tooling to manufacture components for posi-traction locking differential used in automotive, commercial and military applications.

• Provided Manufacturing Process Development used to manufacture the individual components of the posi-traction differentials.

• Provided design drafting of tooling to manufacture components for small brakes and clutch assemblies used in automotive and commercial applications.

• Provided Manufacturing Process Development used to manufacture the individual components of brakes and clutches.

Design Drafter/Manufacturing Process Engineering Technician Modern Engineering Service Co - Warren, MI -

1978 - 1987

Warren, MI 1978 - 1987

Joined Modern Engineering as an apprentice, in the metal removal group. I also went to the local community college at night, taking classes pertinent to my job function. Die design, metal removal, jigs and fixture design. Learned manufacturing processes, heat treating, weld design, and fabrication as it pertains to drafting. Started indirect materials group, with four (4) people, lead a team, and expanded it into a forty (40) person group over the course of four years. Design Drafter/Manufacturing Process Engineering Technician Team Lead/Trainer Indirect Materials

• Provided design drafting for fabrication of metal removal machinery to manufacture engine blocks, cylinder heads, and transmission housings for automotive applications.

• Provided design drafting for fabrication and gauging of cruise missile engine components.

• Provided manufacturing process engineering for crankshaft, connecting rods, pistons for diesel engines, including tolerance stack studies to ensure correct process of parts.

• Lead team of 40 personnel in implementing indirect materials for automobile manufacturing plants cataloging over 2.5 million distinct items. EDUCATION

ASME

Macomb Community College - Warren, MI

Contact this candidate