From:

Naushad Kozhikoden Veetil

Calicut, Kerala, India

To

Amal M

Edakkulam, Kerala, India

Profile: Male, Married

Date of birth 20.12.1961

Medical Fitness No any health issues

Notice Period Immediately

Passport No. & Expiry T 9980160, 13.11.2029

Sub: Appointment as a MEP Draftsman to prepare Quantity take-off / Any Suitable post

Dear Sir,

Recently I had just practiced preparing Quantity take-off for Ducting & piping with Revit software and Previously I was used to preparing it in Excel with Autocad software for HVAC Duct & plumbing Service. I have 15 years of experience in the Gulf working as an MEP Cad Draftsman. Recently I updated Revit 3d Software and also confident to prepare Drawings & details as mentioned below. Unfortunately, the supporting documents not able to attach in the link.

Proficiency in AutoCad 2d Software Version-2019 (Buildings):-

1. Expert to prepare MEP Coordination drawings referring Elecro / Mech. & Civil Drgs.

2. Prepare Builders work Drawings for Core wall, slab and Block wall.

3. Prepare RCP & Shaft Coordination Drawings.

4. Prepare Isometric details instead of Revit.

5. Prepare Shop Drawings for Mechanical Service (Bldgs.)

Proficiency in Revit 3d Software Version-2018 (Buildings):-

1.Prepare Architectural & Reflected Ceiling Drawings

2.Prepare HVAC Load Calculation in Revit Standard

3.Prepare Air Flow Shedule based on HVAC Load Calculation

4.Prepare Mechanical Shop Drawings for HVAC, Plumbing & Fire Fighting Services.

5.Prepare Quantity Takeoff for Ducting & Piping.

Awaiting for your precious response.

Yours truly,

Naushad K.V

Naushad Kozhikoden Veetil

Jennath, Near Nambi Veedu School, Samanwaya Res. No.165, Sneha Nagar Colony, P.O Kallai, Calicut-3, Kerala – India, Mob: 0091 960-***-****, adcs98@r.postjobfree.com, adcs98@r.postjobfree.com,

Seeking Appointment as a MEP Draftsman to prepare Quantity take-off / Any Suitable post

Key skill & Summary

Revit 3d Software Version 2018

Autocad Version (2016, 18 & 2019)

HVAC / MEP Cad drafting experience

Additional experience on Civil drawings

Preparation of BOQ using Excel

Preparation of Isometric Drawings for pipe line

Excel, Microsoft word & Internet browsing

Education

Draftsman - Civil Course, conducted by National Council for Vocational Training Ministry of Labour, Govt. of India.

Passed pre-degree examination from University of Calicut, Kerala - India.

Certification in Cad drafting

Conversant Drawings as a MEP Cad Draftsman

Preparation of MEP Coordination drawings with Sections

Prepare RCP Coordination Drawings.

Preparation of Riser Coordination drawings.

Preparation of Wall opening drawings with Sections

Preparation of Slab opening drawings

Preparation of Mechanical shop drawings (HVAC, Plumbing, Fire)

Prepare isometric for Toilet details.

Previous project (Mainly with Contractors):

Casa Administration Building (Sceco Project - K.S.A)

Tariq Haj (Sunset Beach villa Half moon bay - K.S.A)

Ethihad Tower (Abudhabi)

Dental Clinic Hospital (Khafji – K.S.A)

Teaching faculty centre (Alain University – U.A.E)

Adma-opco & Adgas (Abudhabi – U.A.E)

New Aquatic (Swimming pool project in Qatar)

CBQ Multi Tower building (Qatar)

Cooling plant for Difc (32 chillers work in Dubai – U.A.E)

Inter continental Hotel extension building-Al-Khobar

Kapsarc Project – Riyadh

Al Khafji joint operations (MAU Project, K.S.A)

King Saud university projects- Riyadh

Qatar foundation – Qatar

Jabal Ali Airport’s 2013 Air show project – Dubai – U.A.E

Dubai Airport’s new Terminal job (C4) – U.A.E

Lulu Grand Hyatt Hotel & Convention Centre at Cochin – India

Adam Airbase & ROP Project of Oman

Rafal Living Project (High Rise Tower) at Riyadh

Work Experience

Sterling & Wilson Middle East – Riyadh, K.S.A Mar. 2016 – Oct 2017

MEP CAD DRAFTSMAN

Prepared MEP Coordination Drawing for RAFAL LIVING project (High Rise Tower) at Riyadh using CAD Version-2017.

Sycone cpmc pvt ltd– Banglore, India Oct 2015 – Feb. 2016

MEP CAD DRAFTSMAN

Worked for Adam Airbase & ROP Project of Oman preparing MEP Coordination Drawings, HVAC Shop Drawings. Also, put comments on reviewed drawings prepared by junior Draftsmen and venders.

Teamlease recruitment Consultancy – Cochin, Kerala Jun 2015 – Oct 2015

MEP CAD DRAFTSMAN

Prepared MEP Coordination Drawing for Voltas project in Lulu Grand Hyatt Hotel & Convention Centre at Cochin using CAD Version-2015.

Ramtech Corporation May 2012 – May 2013

MEP CAD OPERATOR

Worked for Qatar foundation, Jabal Ali 2013 Air show project, Dubai Airport’s extension terminal projects receiving short term contact visas to Qatar and U.A.E.

Al Mashariq, SK Engineering, UTC, Radicon & First Gulf Co. Sep’ 10 – Dec’ 11

MECHANICAL SHOP DRAWING ENGINEER / MEP CAD OPERATOR

Worked under different projects and companies holding a Free visa in Saudi Arabia. Nearly 4 months worked as a Mechanical shop drawing Engineer for KAPSARC Project under SK Engineering Reviewing and putting comments on sub-contractors submitted drawings. Also Prepared coordinated sections, Builders work drawings, shop drawing status schedule for 189 Nos. villa etc.

Work continued for other above-mentioned companies on hourly and monthly salary basis as HVAC/MEP CAD Draftsman preparing Mechanical shop drawings, Composite drawings, Builders work drawings, etc.

Voltas Limited, Dubai – U.A.E Sep’07- May 2009

HVAC / MEP Cad Draftsman

Role:

Accountable for the preparation of Coordination, Builders work drawings for Empower DIFC district cooling north plant at Dubai.

Involved in the preparation of Coordination, HVAC shop drawings for Ethihad Site Project infront of International Palace Hotel at Abudhabi.

TRAGS, Doha Mar’05-Apr 2007

Mechanical Draftsman for HVAC, Plumbing and Fire Fighting

Role:

Prepared drawings for CBQ multi-tower Building, New-aquatic swimming pool (Asian games project) and private villa project work which include a group of small and big villas inside one plot.

Universal Voltas, Abudhabi - U.A.E Jan’02-Feb 2004

Mechanical Draftsman: Hvac & Plumbing

Role:

Involved in the preparation of drawings for BHS LIWA, Shaik Khalifa Hospital, Jabal Dhanna, Al Masood, Ministry of Interior, Saed Eid Al Ghafli, Teaching Faculty Centre- (University Al Ain), Adma-Opco & Adgas, Sheraton Residency, etc. using autocad Ver-2002 & 2000.

Hitech Consultants, Doha, Qatar Nov’99-May 2000

HVAC CAD Operator

Role:

Involved in the preparation of HVAC & plumbing drawings of Qgpc Fire Training Center at Dukhan, Shaikh Palace & Albida Plaza (Hotel & Commercial Complex) using autocad release-14.

Pi-Consult, Al-khobar, K.S.A Aug’96-Oct 1998

Cad Operator-1

Role:

Preparing drawings on microstation/Autocad depending on client requirement; drawing packages for the sceco-east; Contract no.82520/00. Al-khafji 115/13.8 kv substation and in Tariq Haj (sunset beach villa. Half moon bay).

Preparing drawings for civil, HVAC and plumbing using cad microstation.

Preparing HVAC drawings from single line diagram, plumbing plan and isometric drawings using microstation.

Assmail Airconditioning, Al-khobar, K.S.A Feb’94-Jan 1996

Mechanical Draftsman / CAD Operator

Role:

Mechanical draftsman and cad operator in the company, involved in the preparation of Hvac drawings from single line diagram in various residential villa projects. Familiar with and well versed in AutoCAD (rel.12) and other drafting job services.

Co-ordination with other engineers of different disciplines and trades involved in project.

Buildline Engineers & Contractors, Calicut, Kerala, India Jan.’90-Jan 1994

Civil Draftsman / Site supervisor

Role:

Prepared Building plan, Service plan and Site plan for Residential buildings to obtain Coorporation / Panchayat license to start construct job.

Supervised site work observing per head manpower coverage, taken measurements and quatities to assist contractors for settlement.

Contact this candidate