Electrical Maintenance and Operation Engineer (Oil & Gas Onshore)
Mobile India : +91-944*******
WhatsApp : +968-********
Date of birth : 15-Oct-1989
E-Mail : firstname.lastname@example.org
Skype : +968-********
In my career major rolls and responsibility is to involved in Electrical Operation and Maintenance Departments Carryout Planned for all Electrical parameters and rotation equipment’s Preventive and corrective maintenance, Troubleshooting and shutdown maintenance activities, failure report and rotating machine service maintenance report and handover report are records without production affecting in Oil & Gas petrochemical and Gas Power Plant onshore.
• B.E EEE (ELECTRICAL AND ELECTRONICS ENGINEEARING) completed in P.B College of Engineering, Chennai with 6.23 CGPA on October 2013.
• DEEE (DIPLOMA IN ELECTRICAL AND ELECTRONIC) completed in Ponnaiyah Ramajayam Polytechnic College, Keelapalayar Kumbakonam, with 80% on April 2007. SUMMARY
SIX (2.6 years in Oman + 3.4 year in India) years’ Experience in Operation and Maintenance field (Power Generation & Distribution)
Competent Electrical Person (CEP) in: Occidental of Oman (OXY) Authorized person in : ISSOW Permit Requester/ Full, AGT (Authorized Gas Tester), CS
(Confined Space), WAT (Work at Height), FW (Fire watcher), Basic First AID, CPR/AED, Performing Isolation & De-Isolation Authority level-2.
Organization : UEP United Engineering Projects Co. LLC, Muscat –Sultanate of Oman Duration : May 2017 to still date
Designation : Electrical and Instrument Supervisor (E & I) Client : OCCIDENTAL OF OMAN (OXY) (OIL & GAS Oman) Nature of work:
Project : PG&D OPERATION AND MAINTENANCE OF OIL AND GAS PLANT (11/33kV, 100MW) Client Name : OCCIDENTAL OF OMAN (OXY) (OIL & GAS FIELD). The Position identifies,
Troubleshooting and maintenance activity of following electrical Equipment’s
GAS TURBINES: Routine & Preventive Maintenance and operation of 10nos Gas Turbine Generators for different capacity likes 4nos of 8MW and 6nos of 15MW (Solar Turbines Titan 130, Siemens Turbines GTG 300)
Daily routine checks for Turbine Generator, 33KV Switch Rack, 11KV switchgear panel and 415v auxiliary panels, Generator protection relay, transformer protection relay, MW, Mvar, current, voltage, Excitation voltage, and protection relays checking, Synchronizing of generator, load matching, Starter motor VFD, DC lube oil motor, AC pre/post lube oil motor, Lube oil cooler fan motor, turbine vent fan and generator vent fan motors, Turbine inlet Gas pressure, Turbine control Battery and charger, Scrubber unit, Huff and puff DP, Instrument Air pressure, any oil leakage inside turbine compartment, Enclosure filters checks, Lube Oil level checks, Inlet air filter db checks
Turbine Generator 2000hrs, 4000hrs and 8000hrs service, Turbine core and gearbox service handled.
Switch Rack and Substation daily inspection and monitoring ( 415v, 11kv and 33kv)
All the DC, AC motors and Transformer tightness checking, motor IR value and WR value checking, NER and body earth pit reading checking and Turbine control back up batteries load test handled.
Generator transformer checking, transformer IR value, WR value check, Transformer oil sample check (BDV test), WTI and OTI check, and other parameters are checking, HV and LV side three phase bushings and neutral bushing checks, oil leakage check in transformer body and around the transformer. DIESEL GENERATOR Servicing and troubleshooting:25kw to more than 1MW service handling, Different ranges of diesel generators like 40Kva, 60Kva, 100Kva, 150Kva, 175Kva, 500Kva,1250Kva Servicing and troubleshooting, Engine Governor, AVR, Exciter, Starter motor, PCC, oil pressure switch, temperature sensor, magnetic pickup ECM,emergency, switches, start relays, Batteries, replacing handled
Different makes like Caterpillar, Cummins, Perkins, Olympians, meccalte, Aksa, Mitas, Eicher, etc...
Carried out Diesel generator load test by using froment sigma load bank controller 500KW
DG changeover and AMF Panel operation carried out manual operation and auto operation DBR Fuel gas generator: 750hrs, 2500hrs services handled and carried out operation and maintenance activity.
Carried out test run the diesel engine pump for firefighting (fire water pump ) TRANSFORMER TESTING&SERVICES: 100Kva up to 20Mva transformer service and testing like IR, WR, Oil BDV, Turns Ratio test (TTR), Transformer cable test, Continuity test, High voltage test, for different transformers Make such as Voltamp, Siemens, Emirates, Telk, Emco, ABB, Crompton Greaves,Kirloskar,Utec.
Carried out Semiannual and annual PM activities
Carried out Cathodic protection transformer annual PM activities
Carried out Desalter transformer annual PM activities
During the TX Repairing work assist with the vendors replace the radiator top value gasket leakage,HV and LV Pushing and marshalling box gasket leakage and Oil filtration work BATTERY,UPS&CHARGER PM:12V,24V Battery bank, 110V AC/DC battery bank,240V AC battery bank, 110V,240V UPS 5KVA,31.5,upto 61.5KVA and 24V Charger Operation and maintenance in different makes like HBL, GUTOR, CHLORIDE, AMERICAN CHARGER, SENS, Sterling power products
During the PM activities check the each battery Voltage,Electrolyte level,temperature,specific gravity. Impedance test and check the tightness of link plate and cables different make Acdelco,sunlyte,Ni-Cd,Lead Acid battery
Battery bank load test and discharge test using load bank
PLC battery charger 24V/25A and 24V/50A installation and carried out Monthly PM activities. SWITCH GEAR SERVICES & PM:ACB,VCB,SF6, MCB, MCCB, ELCB, RCCB,ODCB, GCB Auto Recloser 415v,3.3KV, 6.6kv, 11kv, 33kv service and testing like Vacuum bottle test for different makes like Joythi sohar, ABB, SIEMENS, EPE, CROMPTON GREAVES, MERLINE GERIN,SCHNEIDER,EPE
All types of protection relays like earth fault, overcurrent, differential, Supply supervision, Master lockout, LBB, under voltage, overvoltage, REF, SBEF, Synchronizing relay, motor protection relay, over frequency, function of working, fault history, reset, fault parameters checking MOTOR PM&TROUBLESHOOTING:
VFD,VSD, Soft Starter, SW Starter Panel,ACDB,DCDB Service, Maintenance and troubleshooting different make like schlumberger,Reliance Industry.
HV and LV motors Semi Annual and Annual Maintenance and Trouble shooting 1.5kw,30kw,upto 550kw different make Siemens,ABB,Wego,American motors
Carried out 3.3KV, 6.6KV motor Overhauling Replacing the bearing and stator,rotor adjustment SOLAR PANEL SERVICES AND MAINTENANCE: Three-month only routine inspection check the all parameters solar panel and backup batteries, Inverters and clean the solar panel using distilled water. GAS COMPRESSORS&INSTRUMENTS AIR COMPRESSOR PM: 3.3KV&6.6KV RGRS&GAS COMPRESSORS Semi Annual& Annual PM activities check the IR&WR Value of lube oil cooler motor,pre lube oil pump,process cooller motor,main Siemens 6.6KV Motors.
Carried out Instrument Air compressor and Driyer circuits semiannual and annual PM activities and check the loading & un-loading operation(GA 15,GA 45,GA 75 Atlas Copco ) LIGHTING MAINTENANCE&TROUBLESHOOTING: Check and Replace the Defective lights Plant Inside and Outside Flood lights like Sodium vapor, Mercury vapor, and fluorescent LED lamps. Maintenance of following Electrical Equipments in Oil and Gas Operation:
Carried out WATER SOURCE WELL Semiannual and annual PM activities and Troubleshooting
Carried out WATER INJECION PUMP Semiannual and annual PM activities
Carried out ELECTRICAL SUBMERSIBLE PUMP(ESP WELL) Semiannual and annual PM activities
Carried out Monthly RMU,ODCB Inspection and checking gas level & all parameters
Carried out Monthly Switch Rack Harmonics Inspection and Note down the Readings
Carried out Monthly LTI(long term isolation) Conformation.
Carried out monthly Stand by generator test run activities
Carried out monthly Safety Equipment’s and Electrical equipment’s inspection and checking OVERHEAD LINE MAINTENANCE: 33KV Wooden Pole Shut down jobs and repairing work under my supervision check the lightning arrester, conductor, cross arms all tightness, Earth value EARTH BOND: Monthly and Yearly Plant all Equipment’s structure, Neutral Earth pit value checking and maintained required value
Good knowledge in MS Office, Excel Photo Shops, Windows XP/7/Power point
Preparing documentation related to job ISSOW work Permits, Work Orders Maximo, PM Schedule, PM Procedures
Scope of works, Maintenance Reports, Incidents reports, HES Risk assessment
Material request and updating the data in appropriate site software.
Preparing and Planning of Maintenance Schedules
Preparing Schedule and planning for Shutdown jobs. KNOWLEDGE IN PERMIT SYSTEMS (ISSOW)
Creation of different type of Permit for different jobs such like Cold work, Hot work, Spark Potentional, Confined Space and isolation and de-isolation plan by using ISSOW software
Making new work order and closing work order after completion of jobs by using MAXIMO software.
Preparing Permits, Job safety analysis (JSA), HES Related TBT, Job Plan, Cable Sweep, and all other supporting documents as per job requirements.
Creation of Isolation and De-isolation for different Shut down jobs and Regular jobs by using PROCIENT ISSOW software.
Competent Electrical Person
OXY ISSOW Permit To Work holder
OXY Permit Coordinator Card holder
Authorized Gas Tester
CPR, First Aider certificate given by OTI Training Centre MUSCAT.
Fire prevention & firefighting equipment operation course done by United Engineering projects Co LLc.
Health Safety and Environment Induction Program.
H2S Awareness & Escape Training Program
Certified Tower Climber Training through KARAM training center (Work At Height).
Cable Scanner Certification Courses.
Cenelec standard inspection (IEC & ATEX) course for (Exd, Exe, Exn, Exo) cable glanding and termination
(HV underground cable 11/33KV).
Organization- AATRAL (P) Ltd
Duration : June 2013 to May 2015
Designation : Junior Engineering
Location : Trichy, Chennai, Tamilnadu
Nature of work:
Construction & maintenance of Solor panel:
Ensures that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards
Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs
Manages directly and provide engineering and technical supports to all the electrical work groups at site
Submits site daily reports, inspection requests, estimates and all applicable monitoring reports on regular basis or as required.
Plans the execution of all electrical related works and coordinates the works to mechanical and civil groups
Leading and controlling Foremen, skilled labor and work crews engaged in all activities.
Supervising crew in the installation of electrical equipment, fixtures and fittings, and lighting.
Supervising installation of Cable Trays and Conduits.
Supervising installation of Low Voltage Panel Boards
Ensuring that installations are in accordance with specifications, electrical codes and safety standards.
Preparing attendance sheets and time sheets of all workers.
Addressing problems regarding workers’ safety and health.
Daily reporting to Operation Manager.
Making weekly plans to achieve better performance.
Attending weekly meeting with manager and consulting engineers.
Supervising Cable Pulling and Cable Termination.
Grounding of all panels and electrical equipment and devices.
Having very friendly relationship with colleagues and subordinates PERSONAL DETAILS
Father’s Name : Mr. SUBRAMANIYAN
Date of Birth : 15-Oct-1989
Marital Status : Married
Languages Known : Tamil,English, (Read, Write) Hindi, Arabic, Malayalam (Speak) Address
: 524, Pillaiyar Kovil st, Thillaiyambur(p), kumbakonam(Tk) Thanjavur (Dt), Tamil Nadu - India.
Driving license : Four wheel drive (Light) – India. PASSPORT DETAILS
Passport No : L7789894
Date of issue : 03-04-2014
Date of Expiry : 02-04-2024
Place of given : Trichy, Tamil Nadu
I hereby declare that the information of fact stated here in above are true and correct to the best of my knowledge and belief.