.

ali muhammad (Driller)

Petroleum engineer

IWCF Valid

Successfully Completed Drilling Well Control

Programme IWCF Level # 03 by IMAX (PTA).

** *** **** – 30 Nov 2020.

Plot No# 119-120, Block B, Professors Cooperative Housing Society. Airport Road Sukkur

(Sindh Pakistan)

009****-*******, 009****-*******

Email: adby0n@r.postjobfree.com

Skype ID: Ali.bhutto80

OBJECTIVE

A Resourceful Person Who Has Experience Of The Oil Industry & Has Taken A Professional Interest In HSE Matters & How They Relate To Personnel Protection & Maintaining Productivity, A Team Worker, Who Has The Ability & Knowledge To Be Able To Maintain The Professional Standards With Excellent Communication Skills Involving All Personnel Companies On The Rig Site, Reliable, Conscientious & Committed With Profession.

PROFESSIONAL EXPERIENCE

Working as a “Driller” in ZPEC Pakistan from DEC 2018 to TILL DATE .

Worked as a “ Driller” in Oil and Gas Development Corporation Limited (OGDCL) Pakistan from Feb 2017 to Nov 2018 on Rig K-750T.

Worked as a “ Assistant Driller” in Oil and Gas Development Corporation Limited (OGDCL) Pakistan from Aug 2015 to Jan 2017 on Rig K-750T.

Worked as a “Assistant Driller” with CCDC from July 2010 to Aug 2015.

RIG EXPERIENCE

ZPEC

ZPEC-450

Workover Rig ZPEC-450

Drawwork HP-450

Mud Pump Bomco F- 1200 HP

Travelling Block American 500T

BOPs 10000 PSI. 5000 PSI

Rotary Table National C-375, 20 ”

Engine Cater PILLER 3512, SCR System

I am currently working as Driller on Workover Rig XJ-450 with UEPL.

Involved in work over job like change tubing.2 (3/8)”, 2(7/8)” & 3(1/2)” tubing.

Mill/drill packer and retrieve packer through fishing assembly.

Deeply understand Milling parameters through varities of Mill Bits and wash overshoes.

Run Magnets and junk sub. Technically work on junk sub after pumping Hi-vis to clean the hole.

Milling and scale clean out job.

Running different types of tubing (EUE, VamTop, CS Hydril, PH-6, BGFJU)

Understand Electric Wireline Fishing operations using cut and thread Techniques.

Wash over jobs (used wash pipes and wash over shoe).

Run Bridge plugs like. EZSV & greatly understand the setting mechanism.

Casing integrity test we run R3, RTTS packer.

Greatly understand the well killing procedures on workover wells like. Bull heading, lubricate and bleed method.

Run GP(Gravel Pack) Completions. Run GP Packers and its setting mechanism.

Increasing porosity and prmeability by Pumping Acid and propents like sand.

Run different types of packers. Like Hydraulically set, Mechanically set and Wireline set packers.

Done many jobs through slick line jobs like lib, Magnets, check valves for pressure testing of tubing, guage cutters etc.

Run & Understand coil tubing jobs like. Milling, wash down tubing by spin cat, flowing well by pumping Nitrogen( cool and light gas for well flowing).

Oil & Gas Development Corporation Limited (OGDCL

Rig-K750T

Workover Truck Mounted Rig

Manual Brake

Drawwork 750 HP

Mud Pump Continental Emesco 1200 HP

700 bbls Mud System

I worked as Driller. I did jobs on following Wells as; Mesa Keswal #3, Kal #3,

Thora #(1,3,4) Thora deep # 1 Sono #1& 7, Pasakhi Deep #1,Nim West #1, Palli

Deep #1. kunnar 6. With following responsibilities;

Perform any duty as assigned by Operations Manager, Rig Manager and Tool Pusher.

Pipe tripping operations, handling and operating all drilling related tools and equipment

Following the protocol with all established well control procedures

Mainly Involved in work over job like.

Mill/drill packer and retrieve packer through fishing assembly.

Nitrogen kick off jobs for well flowing.

Cut casings and retrieve well heads. (P&A jobs).

Wash over jobs (used wash pipes and wash over shoe).

CNPC Chuanqing Drilling Engineering Company Limited

Rig GW-165

Joystick Brake System

Drawworks 2000HP

Top Drive Varco TDS-4H

Travelling Block 350 T

Mud Pump Bomco 1600 HP Triplex

Rotary (Varco 37 ”)

I Worked As Assistant Driller On Drilling Rig Ccdc.I Did Drilling Jobs On Following Wells As With

Following Responsibilities;

Prepare BHA And Rig Floor Equipment’s For Tripping, Casing And Cementing Operation.

Assist The Driller During Drilling Operations, Including Relieve The Driller.

Supervised, In Drilling Ahead.

Assist In Running And Cementing Of Casing.

Perform Any Other Duties As Assigned By Driller Or Operation Manager.

Following All The Hse Procedures And Policies And Participating Actively In Hse Programs.

Coordinating With Service Company Personnel And Third Party Equipment’s.

Pipe Tripping Operations, Handling And Operating All Drilling Related Tools And Equipment

Following The Protocol With All Established Well Control Procedures

Observe Proper Rig Operating Procedure And Highlighting Unsafe Practices.

Assisting The Rig Hse In Weekly Safety Meetings.

Prepare &Amp; Follow Up Casing Rih Operations And Float Equipment’s And Centralizers.

Participate In Trouble Shootings And Other Operations On Pumps, Mud System, Drill Line,

Cut &Amp; Slip, Deviation Surveys And Bop Tests.

Well Informed About N/U Of Well Heads And Bop &Amp; Pressure Testing.

ACADEMIC QUALIFICATION

Bachelor of Engineering in Petroleum & Gas Engineering (Grade A,2010)

University of Engineering and Technology (UET) Lahore, Punjab, Pakistan.

Intermediate Pre –Engineering ( Grade A,2006)

Board of Intermediate and Secondary Education Sukkur Govt Degree College.

Matriculation (Physics Math, Bio and Chem) (Grade A,2004)

Board of Intermediate School Education Sukkur Public School

PROFESSIONAL SKILLS

Experience of deep wells up to 9000 ft

Worked on fishing and milling

Experience of worked over wells

Worked on Dual String

Work in Wild cat Exploratory Field as well as Production and work over wells.

Work in H2S Field

Closely assorted with Water Base Mud

Good Knowledge about Rig Equipments and Down Hole tools.

Work on Top Drive system (TDS), SA-11 and SA-9

Familiar to Permit to Work (PTW) system.

Familiar with how to operate the casing tongs.

SAFTEY COURSE

Basic Rig Crew

First Aid.

Safe lifting and Rigging Practice.

Certification on UEPL's Eight Golden Rules. (PTW,Confined Space, Ground Disturbance, Energy Isolation, MOC, Vehicle Safety, lifting Operations, Working at height).

Basic Fire Fighting

Certification of PTW Issuers and receivers.

Certification of Safety and Fire Watch.

HITRA (Hazard Identification & Task Risk Assesment.

Control of Work.

Adv-Fire Fighting

H2s Safety & SCBA. Donning and Doffing Training.

Qhse Environmental Orientation

Chemical Safety & PPE.

Rigging & Slinging

PROFESSIONAL TRAINING COURSE

Introduction to Drilling Rig & Drilling Operations.

Basic Drilling Parameters.

Rig Floor Safety.

Drill string, BHA Designing & Components.

Down Hole Drilling Problems.

Stuck Pipe Prevention

POSITION CONTEXT

Operate Rig (Drilling & Tripping) as per Company representative instrucions.

Plan & prepare equipment as per program.

Conduct BOP tests.

Rig up & Rig down activiteis while Rig shifting/moving.

Mud pump operations.

Monitor various drilling & mud parameters.

Monitor Trip tank for signs of kick.

Coordinate with service company personals to ensure safety in varios operations.

Experience in Hp/Ht wells.

Look after rig equipment & repair.

Insure safety by taking respective measures & to manage my work area according to QHSE requirments.

COMPUTER SKILLS

MS Word

MS Excel

MS Power Point

PERSONAL INFORMATION

Father Name : Abdul Fatah

Date of Birth : 16th Mar 1986

CNIC # : 45504-1155759-7

Passport # : CB3177592

Religion : Islam

Marital Status : Married

Nationality : Pakistani

LANGUAGES

English, Urdu

Additional Information

A Highly computer literate with Cyber Chair Experience, enjoys working in a team and have a good knowledge of health and safety practices. I have been in oil field over the last 10 years . The span of my professional experience is wider enough to cover all the direct and concerning applications in the drilling field. Having a wide range of experience in oil field I have comprehensive knowledge to run the operation in tidy and constitutional manners. Also have good experience of rig moves, mast raising and lowering including the assessment of new locations. Good presentation and delegation ability as well. I am fully acknowledged with different formations and well problems which help me to be ready to handle any kind of critical situation at any given time that is obviously transparent through my certifications.

REFERENE

Will be furnish on request

Contact this candidate