Resume

Sign in

Engineer Design

Location:
Rawdat Al Khail, Qatar
Posted:
January 16, 2020

Contact this candidate

Resume:

Curriculum Vitae

RAFIUL QUADER KHAN

CV Page * of 5

QUALIFICATIONS

B-Tech.(Electrical Engineering) - Jamia Peer Mohammed University, Hyderabad, 2006

Certificate in Auto Cad Design - Aabad Institution of Design, New Delhi, 2003

Intermediate - U.P. Board, 2002

High School - U.P. Board, 2000

COMPUTER LITERACY

AutoCAD (2D & 3D), Revit, Photo Shop, MS Office and Dialux. PROFESSIONAL WORK EXPERIENCE:

Over 12 years as Project Engineer/Site Engineer/Site inspector. CONTRACO WLL – QATAR

MEP Design Engineer ( March 2011 – Present)

Duties and Responsibilities

Pre-construction Phase:

As an MEP designer, supervise the design & drafting team for all MEP deliverable like Single line diagram, equipment layout, cable routing layout, cable trench layout, tray layout, installation drawings, schematic drawings, block diagram, lighting & small power layout, Plumbing Layout, Drainage Layout, Irrigation Layout etc. independently.

To advice on any impact on services caused by Architectural changes and raise Query to MEP Manager & Consultant.

Prepare Voltage drop calculation sheet for Cable sizes as per Kahramaa Regulations.

Prepare material/Equipments technical submittals for submit to consultant as per project specification.

Produce Equipments & builder- work scope Schedule for all MEP Equipments detailing construction and maintenance requirement for Equipments.

Review of method statements from Sub-contractor with respect to installation works and logistics for equipment positioning. To liaise with MEP Manager on matter seeking advice/requiring assistance.

To assist internally QS and Planning department for update MEP system progress. Construction Phase:

Ensuring that services provisions clearance is provided in time for structure.

To provide technical advice to construction team.

To oversee MEP services installation under civil contractor scope of works.

Close inspection for MEP contractor installation works.

Carry out site walks and inspection for service installation, identifying poor quality elements and advise construction team and MEP Manager.

Carry out inspection for Sub-Contractor material along with QA/QC and Consultant.

Ensure that MEP site instruction/NCR are closed out (if any).

To inspect concealed MEP service installation prior to closure of void /riser etc. in conjunction with QA/QC and obtaining consultant sign off.

RAFIUL QUADER KHAN

MEP Design Engineer

Curriculum Vitae

RAFIUL QUADER KHAN

CV Page 2 of 5

Ensure that Company HSE policies are implemented at site in coordination with HSE department.

Preparation of Minutes of meeting after weekly site coordination meeting. Projects Handled:

Construction & Development of QF Golf Course (Package 2). Consultant: Ramboll Project Management: Time Qatar Client: Qatar Foundation

Worker’s Hospital & Integrated Health Centre at Mesaieed Industrial City. Consultant: Dar Al Handasha

Client: Privet Engineering Office

Tamu-Q & High Hazard Labs, Qatar Foundation, QATAR Consultant: Astad Project Management

Client: Qatar Foundation

CONTRACO WLL – QATAR

MEP Coordination Draughtsman (December 2009 – February 2011) Duties and Responsibilities

Preparing Shop Drawings/Design Drawing for Chilled Water, Ducting, Drainage, Irrigation system, Water supply, Storm water, Fire Fighting, Electrical (Lighting, Power, Telephone, Fire Alarm, CCTV etc.) Layout from Design Drawings

Receiving Commented Drawings from the Consultant & Submitting the Amended Drawing to the Engineers.

Having Knowledge Of Making Isometric Views & Schematic Drawings From Relevant Drawings

Preparation of Tentative Layouts for Projects while tendering.

Preparation of Isometric Layouts.

Preparation of Schematic Diagram.

Preparation of Plant Room, Pump Room, HV Room and MV Room Layout.

Incorporating standard details for HVAC, DRAINAGE, PLUMBING, FIRE FIGHTING, IRRIGATION and ELECTRICAL services.

Incorporating Equipment schedule for all services.

Superimpose all service’s shop drawings in CO-ORDINATION drawing and coordinate their levels, rooting, equipment locations etc.(EXTERNAL AND INTERNAL THE BUILDING)

Preparation of Sectional details for the project at required areas.

Co-ordination with the concern design/site engineers while Preparing CO-ORDINATION drawings.

Resizing of Ducts and Chilled water, Drainage, plumbing pipes as per co-ordination required for the projects

Revising the all Layouts as per Revised Architecture/ Structural/False Ceiling

Layouts.

Preparation of As-Built drawings.

Attending weekly site coordination meeting.

Curriculum Vitae

RAFIUL QUADER KHAN

CV Page 3 of 5

Projects Handled:

AL-JASASIYA GUEST PALACE, AL JASSASIYA, QATAR

Consultant: GHD

Client: Privet Engineering Office

CONTRACO OFFICE BUILDING(2B+G+F+S), AL MAMOURA, DOHA, Consultant: Arab Engineering Bureau,

Client: Mr. Abdullaha Al Attiya

V.I.P. MENSION-2 ISOLA DANA, PEARL QATAR, QATAR

Consultant: CEG

Client: Privet Engineering Office

BEACH VILLA at LEHWALIA.

Consultant: Arab Engineering Bureau

Client: Mr. Abdullaha Al Attiya

TORNADO TOWER (2B+G+54F) FIT OUT WORKS, AL DAFNA, QATAR Consultant: Astad Project Management

Client: Qatar Foundation

RAMTECH SOFTWARE SOLUTIONS, DUBAI, UAE

MECH. Draughtsman (HVAC, PLUMBING & FIRE FIGHTING) - MARCH 2008 – FEB. 2009 Duties and Responsibilities

Duct, Pipe Design

Preparing Shop Drawings & as Built Drawings for Chilled Water, Ducting, Drainage, Irrigation system, Water supply, Storm water Layout from Design Drawings

Receiving Commented Drawings from the Consultant & Submitting the Amended Drawing to the Engineers.

Having Knowledge of Making Isometric Views & Schematic Drawings from Relevant Drawings

Preparation of Tentative Layouts for Projects while tendering.

Preparation of Isometric Layouts for Refrigerant/ Chilled water

Piping, Irrigation system

Preparation of Schematic Diagram.

Preparation of Instrumentation Diagram.

Preparation of wall penetration Layout.

Preparation of Plant Room Layout.

Preparation of Sectional details for the project at required areas.

Incorporating standard details for HVAC, DRAINAGE, PLUMBING and IRRIGATION services.

Incorporating Equipment schedule for HVAC services.

Sizing of Ducts and Chilled water, Drainage, Plumbing pipes for the projects.

Co-ordination with the concern design/site engineers while

Preparing drawings.

Checking for levels with other services.

Preparation of Air-conditioning, Smoke and Ventilation layouts.

Preparing drawings for MEW Approval.

Curriculum Vitae

RAFIUL QUADER KHAN

CV Page 4 of 5

Preparing As-Built drawings.

Revising the HVAC, Drainage, Plumbing Layouts as per Revised Architecture/

Structural/False Ceiling Layouts

Projects:

1. MOVE AND PICK HOTEL, PALM JUMEIHRA, DUABI, UAE (VOLTAS) 2. ROTANA AND CENTRO HOTEL, YAS ISLAND, ABU DHABI, UAE.(DRAKE & SCULL)

3. FORMULLA ONE K RACE TRACK, YAS ISLAND, ABU DHABI, UAE. (VOLTAS) ABID HUSSAIN CONSULTANTS, NEW DELHI, INDIA

DRAFTSMAN (HVAC) Dec. 2006 – Feb. 2008

Section of Various areas.

Duct Design.

Receiving commented drawings from the consultant & submitting the amended drawing to the engineers.

For HVAC Services, Designing of complete Duct Layout etc..

Preparing Shop Drawings & as Built Drawings for Chilled water & Ducting layout from design drawings.

Having knowledge of making Isometric views & Schematic drawings from relevant drawings.

Making Quantities for HVAC services from Shop drawings.

To make Builders work related to HVAC works.

Projects:

1. Indian Oil Corporation Hyderabad

2. City Hospital Orangabad

Curriculum Vitae

RAFIUL QUADER KHAN

CV Page 5 of 5

PERSONAL INFORMATION

Nationality: Indian

Language: English, Arabic, Urdu & Hindi.

Sex: Male

Date of birth: 10-05-1986

Passport No: P0073087

Marital Status: Married

Religion: Muslim

Qatar Driving License: Yes

Declaration

I consider myself familiar with mechanical field. I am also confident of my ability to work in a team. I do hereby declare that the information furnished above is true to the best.



Contact this candidate