CURRICULAM VITAE
Sr. Telecom Engineer (Designing) with 12 Years’ experience
Name: Sameer Ahmed Ala
Current Address: Saudi Arabia-yanbu@RC
Phone: 040-********(India)
Mobile: +966**********(Saudi Arab)
Email:****.*********@*****.***
Register in Saudi Council as Associate Engineer
OBJECTIVE
Aim to learn more and gain practical knowledge that can be further utilized to accomplish the organizational goals effectively. Looking for challenging and exciting opportunities, which call upon one’s ability and give a considerable degree of responsibility.
PROFESSIONAL QUALIFICATION
2004-2008 Jawaharlal Nehru Technological University (JNTU) Hyderabad, India.
Bachelor of Technology (B. Tech) in Electronics & Communication Engineering
Graduation Grade: Good (first division)
Graduation Project: EPAX (Electronic Private Automatic Exchange) /IR-Security system
Graduation Project Grade: Excellent.
Professional Software Skills:
AutoCAD 2007-2018 by Autodesk, Inc.(professional)
REVIT(BIM)2013
Microsoft WORD and EXCEL
Microsoft Power Point
Computer Skills:
CCNA/CCNP
MS-office (Excellent).
Network solution: IP network (A+, N+ and CCNA).
Codes and Standards:
RC Royal Commission Standards
SASO Saudi Arabian Standard Organization
STC Saudi Telecomm Company
IEEE institute of Electrical & Electronic Engineers
ITU-T International Telecommunication Union Telecommunication
ANSI American National Standard Institute
Professional experience: 12 years of experience in Consultant Designing. 1) Position: Sr. Telecom Design Engineer (2018-till date) Company: ABDUL RAHMAN AL NAIM CONS. ENG. (ACE) - Sub Consultant of Royal Royal Commission Yanbu (RCJY)
Location: YANBU & JAZAN, Saudi Arabia.
PROJECTS (RC YANBU):
Project Name Contract Number in RCJY
Family housing (2,3 & 4 bedrooms) JCPDI F-7005
Commercial Center JCPDI-F-7009
Local mosque building JCPDI-F-7009
Roles and Responsibilities:
Working as a Sr. Telecom Engineer on Royal Commission Yanbu projects, where some of my daily responsibilities are:
Responsible for Performing site survey for telecom design “Telecom network / FTTH” and coordinate with latest as-built drawings
Prepare the DAR (design analysis report) as per the existing condition as well as proposed design.
Design duct distribution network to provide telecom service to the proposed facility’s based on the latest as-build drawing.
Design the Infrastructure Telecom system fiber networks (FTTH)
Distribution of security camera on the proposed site to cover the utility’s and roads
Prepare the schematic diagram and block diagram as per the network
Coordinate with other discipline like civil, electrical with their utility’s
Designing all type of Low current system such as (Data, IP-Telephone, LAN/WLAN, IPTV, IP- CCTV, public address, Intercom system and Access Control system).
Prepare single line diagrams and block diagrams
Calculation, BOQ, material take off (MTO), SOQ, and all other related documents inside RFP package
(attachment D1, D3 & D5)
Prepare Specification as per the design (Division 27 & 28)
Attain hand-on review meeting with RC-Engineer
Updated the design and specification as per the requirement and prepare the design for next submission 2) Position: Sr. Telecom Design Engineer (2010-2018) Company: ABDUL RAHMAN AL NAIM CONS. ENG. (ACE) - Sub Consultant of Royal Commission (R.C) – Saudi Arabia Bechtel Company (SABCO). Location: Dammam, Saudi Arabia.
Roles and Responsibilities:
Fiber Optical Network distribution (FTTX, DATA & CATV/IPTV).
Telephone Network distribution (Secondary and primary copper networks) Operation Skills:
Design outside Plant (OSP)
CCTV System
Access Control System
Fire Alarm Systems
Audio Video Systems SATV/MATV/ IPTV
AutoCAD / MS Office
Nurse Call System
Structure Cabling Systems (UTP/ FIBER)
Telephony system
Network LAN/WAN infrastructure
Building management system
Data Center & Telecom Equipment Rooms
Preparing Budgets, BOQ and MTO.
PROJECTS (RC- JUBAIL):
Project Name Contract Number in RCJY
Government Buildings Phase 1 611-C22
Expansion of Temporary Academic Male (JUC) 097-C67 Student & staff accommodation for JIC- 097-C53
P&C OF JTI EXPANSION, PHASE 4 028-C26
Construction of Schools in Jalmudah, Phase 4 627-C19 Neighborhood Centers and Sector Center at
Jalmudah, Phase I
765-C01
Construction of Friday mosques, phase 2 610-T17
RC-HOSPITAL(FANATEER) 641-C27
Cultural Center 671-Y01
Multi-event center 114-C37
Police station 611-C25
RC-CLINICS 641-C27
Alwaha shopping center Dammam
Ministry of water OTHER PROJECT
Faculty of science (medina) Medina
Umul-qura university Makkah
MA’ADEN JUBAIL
City Center Mall MA’ADEN PROJECT
My Job responsibility:
Site survey (study the existing infrastructure)
Prepare DBR (design base report)
Design and construction support for outside plant facilities (Infrastructure Work) including Backbone FOC and Access Network FOC designs (FTTH, GPON) including the site surveys.
Get non objective certificate (NOC) from STC or STC approval.
Designing and planning FTTB
Conversant in Performing Engineering Studies in The Planning and Design of Telecommunication Networks for Outside Plant Network for “Fiber Optics “And “Copper Cable “In The Process Plant Industries.
Designing Low current system such as (Data, IP-Telephone, IP-CCTV, IP-TV, CATV, public address, IP- Clock, Master clock, Intercom system, Intrusion detection, Audio visual and Access Control system).
Prepare single line diagrams and block diagrams
Designing and planning solution for building control systems (BMS system for HVAC, Lighting, security and door contact system) from scratch using AutoCAD software.
Managing design implementation and commissioning of BMS with 3rd party systems.
3rd party system integration like Modbus BacNet thru BMS system.
Project planning and preparing budgets, BOQ and MTO. 3) Position: Network Design Engineer. (2009-2010)
Company: TECHNO (Electronics security system)
Responsibilities: Designing and installation
Worked in one of the biggest construction company for the MEP Projects like SHOPPING MALLS, AIRPORT, COMMERCIAL & RESIDENTIAL BUILDINGS, HOTELS & UNIVERSITIES in HYDERABAD.
IP-CCTV Design and execute for (shopping malls, offices, outdoor fences)
Calculation of CCTV storage
Audio visual system (Auditorium conference hall meeting rooms & multi-propose hall)
Configuration of Digital Video Recording (DVR) and Network Video Recording (NVR).
IP-Door Access control system (wire & wireless)
Installation of Fire alarm and security system.
Selection of devices – Smoke, Heat and Beam Detectors.
Installation of data cabinet switches patch panels
Considering Points from Network and Standalone System.
Installation and Troubleshooting of analog CCTV and IP CCTV.
Design house security systems using IR pairs.
Used EPBAX technology for linking one to many networks.
Preparing Budgets, BOQ and MTO.
PROJECTS:
Project Name My job
Hotel Taj banjara Design CCTV security system / Access control DRDL Design Outdoor CCTV (security fence)
City center mall Design PA system and CCTV system
4) Position: Telecom Engineer (2008-2009)
Company: ICOMM (International communication) Hyderabad, India Responsibilities:
Worked in I-COMM Company as a Telecom Engineer on EPABX
Identifying the problems in the existing sites.
Responsible for revision of design drawings
Provide details shop drawing during project construction
Review and coordinate telecommunication renovation and construction projects
Provide technical support from planning, designing, to final construction
Analyze resources needs of telecommunication projects and develop schedule
Study project feasibility, and draft and present report to the management
Prepare design, scope, and estimates of projects, MTO
Define, develop, and promote plans for all future projects
Designing the block diagram in accordance with the project.
Meeting with different supplier for selecting proper equipment’s
Designing the cable maintenance equipment’s.
Checking the condition of the components.
Personal Details
Birth date : 30-01-1986
Nationality: Indian
Marital Status : married
Languages : English, Urdu, Hindi, Arabic
Hyderabad-500059, Telangana.
Email: ****.*********@*****.***