Resume

Sign in

Welding & NDT Inspector

Location:
Rawdat Al Khail, Qatar
Salary:
oooo
Posted:
November 06, 2019

Contact this candidate

Resume:

CURRICULUM VITAE

POST APPLIED FOR – Welding & NDT Inspector

Kanai Debnath

Email- adar28@r.postjobfree.com or adar28@r.postjobfree.com

IMO +918*********, Skype ID: kanai11112, ph. 009********** Qatar.

Date of birth- 1st June 1971. Nationality- Indian. Language- English, Hindi, Bangla. Permanente Address= Neel Diganta Enclave, Asutosh Ghosh road, Near Barasat Government Coolidge, Block- B, 4th floor, Flat no- C, West Bengal., Pin – 700124, Passport no- Z4316534, Re-Issue date-24/07/2017,Expiry Date- 23/07/2027, https://www.linkedin.com/in/kanai-debnath-55497a68

CAREER OBJECTIVE

Intend to build a career with leading construction of Oil &Gas., which will help me to explore myself fully and realize my potential. Work as a key player in challenging & creative environment.

Having above 17 years of working experience in Refinery and Oil &Gas Construction and Fabrication in different Projects,

Technical Qualification.

Certified CSWIP 3.1 WELDING INSPECTOR (TWI) Certificate no- 57188/2

Certified Radiography Testing course Level -2 of A.S.N.T.

Certified Penetrant Testing course Level -2 of A.S.N.T.

Certified Magnetic Testing course Level -2 of A.S.N.T.

Certified Ultrasonic Testing course Level -2 of A.S.N.T.

General Qualification

B. E. (Mechanical Engineering) Institute of technology and management studies (ITMS)

S.S.C Gurukul Vidya mandir. SR,SEC (Board of higher Secondary Education )

H.S.C Gurukul Vidya mandir. SR,SEC (Board of higher Secondary Education )

KNOLEDGE OF INTERNATIONAL CODES

ASME SEC V - Non Destructive Testing,

ASME CODES B 31.3 & B31.8, B 31.1, B 31.4

ASME SECTION IX Welding And Brazing Qualification

ASME SEC VIII Rules For Construction of Pressure Vessels

ASME SEC II Materials Details

BS EN 287-1 Qualification test of welders

API 1104 Welding of pipeline

JOB EXPERIEANCE ABROAD & INDIA

1.QCON – Qatar Engineering & Construction Company W.L.L.

Work QC WELDING & NDT INSPECTOR

Location Qatar gas south

Duration 2nd October 2019 to till date

Projects Qatar Gas south shutdown.

Clint Qatar Gas.

Responsibility

Conducting inspection of Raw materials and review of MTC and the specification requirements.

Reading and interpreting the various drawings (P&ID, GA Drawings, Isometric & spooling) required in the Piping fabrication work and erection work.

Preparation and approval of Work procedures and Inspection Test Plan ITP/QCP for piping according to the project requirements.

Prepared and Qualified welding procedure specification (WPS) for various grades of materials like ASTM 106Gr B, ASTM 106 Gr C and ASTM A312 Tp 316L as per ASME Section IX.

Conducting and witnessing the welder qualification skill test in accordance with the approved WPS and prepare Welder performance qualification record (WQT).

Surveillance and monitoring the contractor’s Process activities like fit-up, Preheat, DPT as per FQAP/ITP and WPS Preparing inspection report for day to day activities.

Monitoring the welder performance on the basis of acceptance of NDT testing of joints and maintaining the record as per Line History.

Preparing Weld maps for Hydraulic piping, Utility piping and Inter connecting piping works.

Witnessing and Reviewing Non Destructive Testing (NDT) activities in Welding compare with codes and standards..

Coordinating with clients for QC issues and coordinates with third party inspection agencies for offering the stages as per Inspection Testing Plan (ITP).

Check for PWHT and review the charts and Compile with standards and specifications.

Preparing QC documentation for handling over to the client and maintaining proper filling system.

Verifying the Piping test pack to undertake Pre-hydro test inspection activity and initiate punch list.

Witnessing all testing activities like Hydro and Pneumatic test, chemical cleaning and Oil flushing.

Distributes Test Packages to Inspectors and Line Checkers for Site Confirmation and Verification.

Review all NDE results of qualification and production joints.

RT film interpretation.

Monitoring welder performance, repair follow up, penalty status, line NDE status etc.

Ensure all NDE have been performed and witnessed as in project spec. and ITP

2. TATA PROJECTS LIMITED.

Work QC ENGG/ QC WELDING & PIPING.

Location Haldia petroleum, India.

Duration 7th may 2018 to 26 July 2019

Projects Haldia Petrochemicals Ltd, HPL. West Bengal (India).

Clint Haldia Petroleum’s.

Responsibility

Verifications of vendor compliances according to purchase order and specifications.

Witnessing the mechanical test required to qualify the materials.

Preparation and qualification of WPS, PQR & WPQR as per ASME Sec IX and relevant Project Specification.

Surveillance inspection during the fabrication & welding of piping.

Receiving inspection of raw materials, welding consumables and bought out materials.

Monitor Contractor’s and subcontractor’s work activities for compliance with quality requirement as per QAP/ITP.

Notify the non-conformance observed during the inspection and recommending corrective action.

Conversant with ASME Sec VIII, Sec IX, Sec. V, Sec IIA/B/C, API 1104, TEMA, ASME B31.3, B31.8,

Review of radiographic films, monitor and control of weld repair rate by analyzing the repairs.

In hand experience in conducting, Radiographic Testing, Ultrasonic testing, Magnetic and liquid Penetrant testing and interpretation of results.

Compilation of quality control documents and submission as a final dossier’s to Client.

Review of NDT Procedure & Interpretation reports as per ASME codes and client requirements.

Verifying welding consumable and review of test certificates as per the project / WPS requirement.

Hydro testing and Pneumatic testing witness.

3. Joint venter SK Engineering (SK E&C), GS Engineering (GS E&C),

Work Welding & NDT Inspector

Location KNPC (Kuwait National Petroleum Company.

Duration November 16th 2017 to 7th march 2018 (fully shutdown job).

Projects KNPC (Kuwait National Petroleum Company

Clint KNPC, Kuwait.

Responsibility

Interpreting drawing and specification of materials and welding requirements,

To review the material certificate chemical composition and the physical properties.

Review of daily welding and ndt reports.

Check fit up, groove angle, type of groove, root gap and cleanliness of joint.

Check condition of welding equipment, current, voltage and polarity.

Supervise and witnessing the welder qualification test as per welding standard procedures.

Conduct inspection of all materials being used for welding activities, Prepare and submit quality report.

Dimensional check of weld and preparation of stage inspection report.

Perform welding inspection to ensure that all welding activities are properly executed.

Check welding procedure (Essential and Non Essential variables) and individual welder qualification.

Procedure Qualification, Welder Qualification.

Witness for all testing activities with the client and third party and to get the final documentation after testing approved by them.

Visual and Dimensional Inspection, Hydro test Reports and Final clearance.

Reviewing raw material MTCs.

Receiving the raw material and checking hardness.

Calibration of all Non Destructive Testing equipment’s. Maintaining inspection records.

Conduct inspection before, during and after welding. Monitoring Ultrasonic Test & RT film interpretation

4. TEKFEN CONSTRUCTION AZERBAIJAN.

Work Welding & NDT Inspector

Location AZERBAIJAN, BAKU

Duration September 25th 2015 to 26th January 2017.

Projects AZERBAIJAN SHAH DENIZ STAGE 2. (Extension projects)

Clint BP EXPLORATION (SHAH DENIZ) LTD

Responsibility

Perform and strictly monitor the following inspection activities as-per ITP, CEP and Project pacifications.

Witness WPS & WQT as per required codes and standards.

Review and verification of Material certificates and Cutting Plans before Fabrication.

Identification of material and stamp transfer.

Preparation of As- built Drawings, weld maps for shop and field Welds.

Monitoring Weld joint preparation. Fit-up inspection, welding inspection and visual inspection.

Welding Inspection of Tie-In & Repair Weld. Verification of pipe fittings and Piping Dimensions.

Monitoring of Pre Heat treatment before Welding. During welding, check proper parameters as per WPS.

Control welding consumables and weld defect rate as per procedure.

Welder Performance monitoring and taking corrective action.

Monitor PWHT in special requirements. Verification of PWHT reports with respect to procedures and specifications. Hardness inspection.

Arrange and co-ordinate NDT activities. Evaluation of NDT results (PT, MT, RT& UT).

Interpretation of radiographs films.

Preparation & review piping hydro test packs according to P&ID and Isometric and organizing hydro test.

Arrangement and witnessing of Hydro, Leak and pneumatic tests according to client specification and approved drawing. Line walk and mechanical clearance of piping and its piping components and hand over to commissioning department. Daily / weekly / monthly reporting of QA/ QC activities to project management and client.

Attending weekly /monthly construction and management meetings.

Co-ordination with 3rd party inspection agencies and clients for the inspection activities.

5. ENI International Resources Ltd,

Work Welding & NDT Inspector

Location ZUBAIR, IRAQ.

Duration 15th April 2013 to 18th June 2014,

Projects ZUBAIR OIL FIELD DEVELOPMENT PROJECT,

Clint ENI BV IRAQ, Operating Company.

Responsibility

Review and approve Contractor and Inspection and Test Plans for conformance to specification, codes and standards and identification of inspection intervention requirements.

Verify quality control documentation in the form of Inspection and Test Plans, Method Statements and

Work instructions and inspection records / test certificates are available prior to work commencing.

Ensure work sequence is planned and controlled via Implementation and adherence to company approved method statements and work instructions.

Surveillance activities of Pipeline / piping / DGS / Christmas tree/ construction and testing works at site as required by Inspection and Test Plans. Verify product conformity and full compliance with engineering drawings specification, codes & standards and project contract documents.

Witnessing NDT of Welding works to verify adequacy of construction and inspection methodologies in producing product conforming to engineering drawings, specification, codes & standards and project contract documents.

Review and acceptance, via signature, of process and inspection verification documents in the form of Inspection and Test Plans, Inspection records, checklists and Test certificates.

Monitoring and reporting the works status using Computer software (MS project).

Ensure company regulations with regard to work safety and environment preservation are maintained.

Produce and submit daily Inspection Reports identifying items inspection, acceptance / rejection rates and area of concern. Carry out surveillance inspection of materials, consumables, welding for the different piping systems, piping supports and steel structure.

Check for the hydro-test packages, witness for hydro-tests and reinstatement works.

Review, endorse NDT and QC reports and prepare daily and weekly reports. Assessment & review of documentation required for the successful work completion.

Witness building, bolts tightening and hydro-testing for Flanged end pipe spools for the successful work completion. All Pipeline and piping welding activity inspection. Witness welder certification test (WQT) and (PQR) test inspection. Verification welder certificates and ID cards. Reviewing All NDT Mentored.

Verification welder certificates and ID cards. Reviewing All NDT Mentored. Witness Non- Destructive test as MT, PT, UT, and VT. Conducting Radiography Film Interpolation piping and pipeline.

6. Consolidated Contracting International Company.

Work QC Inspector Piping, Welding.

Location KAZAKHSTAN. ATYRAU,

Duration 29th January 2011 to march 2012,

Projects KAZAKHSTAN DEVELOPMENT EXPENTION PROJECT,

Clint AGIP KCO, an Operating Company,

Responsibility

Ensure that Contractor, Sub-Contractors and Vendors have the required competent resources, implant internationally acceptable practices and delivery of a product in compliance to QP Corporate and Project Quality requirements.

Monitor all site and fabrication yard welding activities and ensure that all welding joints were welded as per QP approved WPS’s.

Attend all PQR’s mechanical testing to ensure complete implementation of QP corporate standard requirements.

Witness all contactors’ welder’s qualification tests and evaluate their visual and NDT results.

Witness all site or fabrication yard NDT daily activities, carry out interpretation for test results, and evaluate the finding outs.

Monitor the stage (in-process) inspection of offshore steel structure fabrications, and top side facilities at contractor fabrication premises and verify the product conformity to QP corporate standard, project specs, and international codes/standard.

Report daily to QA/QC Coordinator/ Engineer and advise him on the QP’s main contractor compliance to contract procedures and standards and any matters effecting quality.

Witness WPS, PQR & WQT, as-per required codes and standard.

Perform and strictly monitor the following inspection activity as-per ITP, QCP and project specification.

Review and verification of materials certificate’s and cutting plan before fabrication.

Monitoring weld joint preparation. Fit-up inspection, welding inspection and visual inspection.

Monitoring weld defect rate as-per procedure. Welder performance monitoring and taking corrective action. Monitoring PWHT in special requirements.

Verification of PWHT reports with report to procedures and specifications. Hardness inspection

Arrange and co-ordinate NDT activity’s. Evaluation of NDT results (MT, PT, UT, RT).

Especially Interpretation of Radiography’s reports.

Inspection of piping spools and structural modules for testing release.

Assure all the piping fabrication and handling of fabricated spools and installation are in accordance with general arrangements and Isometric Drawings/project specification.

Preparation and review hydro test packs according to P & ID and Isometric and organizing hydro-test.

Arrangement and witnessing of Hydro testing, Leak testing, pneumatic testing according with client specification and approval drawing.

Verify Instruments / Equipment’s are calibrated as-per QA/QC procedures and availability of all the calibration certificates. Daily/Weekly/monthly reporting QA/QC activities to project management and Client. Attending weekly / fortnightly / monthly construction and management meeting.

Monitoring, follow up & Closing out NCR.

Co-ordination with 3rd party inspection agencies and clients for the inspection activity.

7. Consolidated Contracting International Company.

Work QC Inspector Welding.

Location KAZAKHSTAN. OFFSHORE, D-ISLAND,

Duration December 2008 to 31 August 2010.

Projects KAZAKHSTAN DEVELOPMENT EXPENTION PROJECT,

Clint AGIP KCO, an Operating Company,

Responsibility

Witness WPS, PQR & WQT, as-per required codes and standard.

Perform and strictly monitor the following inspection activity as-per ITP, QCP and project specification.

Review and verification of materials certificate’s and cutting plan before fabrication.

Monitoring weld joint preparation. Fit-up inspection, welding inspection and visual inspection.

Welding inspection of Tie-in & repair inspection. Verification of pipe fit-up and piping diameters.

Preparing of As-built Drawings, weld maps of shop and field welds.

Monitoring of pre Heat treatment before start welding activity.

During welding, check proper parameter as-per was. Control welding consumables and monitoring records.

Monitoring weld defect rate as-per procedure. Welder performance monitoring and taking corrective action.

Monitoring PWHT in special requirements.

Verification of PWHT reports with report to procedures and specifications. Hardness inspection

Arrange and co-ordinate NDT activity’s. Evaluation of NDT results (MT, PT, UT, RT).

Especially Interpretation of Radiography’s reports.

Inspection of piping spools and structural modules for testing release.

Assure all the piping fabrication and handling of fabricated spools and installation are in accordance with general arrangements and Isometric Drawings/project specification.

Preparation and review hydro test packs according to P & ID and Isometric and organizing hydro-test.

Arrangement and witnessing of Hydro testing, Leak testing, pneumatic testing according with client specification and approval drawing.

Verify Instruments / Equipment’s are calibrated as-per QA/QC procedures and availability of all the calibration certificates.

Daily/Weekly/monthly reporting QA/QC activities to project management and Client.

Attending weekly / fortnightly / monthly construction and management meeting.

Monitoring, follow up & Closing out NCR.

Co-ordination with 3rd party inspection agencies and clients for the inspection activity.

8. Consolidated Contracting International Company.

Work QC Inspector Welding.

Location KUWAIT, Mina All Ahmadi.

Duration 27th January 2007 to 10 September 2008.

Projects OIL 2K Projects. Ethaline projects (Kuwait)

Clint Technip and Flor denial.

Responsibility

Preparation of Inspection and Test Plan, checklist, procedures and review of construction drawing.

Material Receiving inspection of all RTRP/FRP Pipes and fittings, Gasket, valves, flanges, bolts & nuts in compliance to material list, mill certificates, test reports and correct material specification.

Control of quality for piping fabrication such as fit-up, visual and dimensional inspection conforming to approved for construction drawings. Responsible for issuance of Non-Conformance Report if any violation and out of standard for piping works. Conducts quality co-ordination meeting and initiate corrective and preventive action. Inspection of piping spools fabrication, installation and testing.

Assign as hydro test engineer for all piping and thermoplastic piping, shop fabrication.

Line flushing, air blowing; pressure testing, piping lay-up inspection, relief valve installation, re-instatement and final inspection for mechanical completion.

Responsible for inspection of pipe spools for shop and fabrication such as fit-up, dimensional and visual inspection as Company specification.

Prepare Request for Inspection(RFI) to Project Management Team(PMT) and Project Inspection Division through Quality Management Information system(QMIS)

Witnessed, checked, monitor and inspect of hydro test pressure as per specification (General Requirements for Pressure Testing)

Prepare Non- Conformance Report (NCR), Preventive Action Request (PAR) and initiate corrective Action for every violation and out of Standard of Construction activities. Close log book entry or surveillance violation.

9. M C S C Company. Bahrain

Work PIPING INSPECTOR.

Location BAHRAIN, MANAMA.

Duration 9th January 2000 to 3rd March 2006.

Projects POWER PROJECTS, GOSOLINE PROJECTS,

Clint BAPCO, BANA GAS, BANACO,

Responsibility

Witness and monitor suppliers/contractors work activities, inspection and test in accordance with the approved Quality Plan, ITP, Quality Procedures and etc.

Ensure testing, measuring equipment is fully calibrated as per specification and has current certification.

Witnessing tests like Magnetic Particle Testing, Ultrasonic Testing, Dye penetrant testing.

Preparation of Daily/weekly inspection reports, pre and post-reports, worksheets, noncompliance reports etc. In process inspection of pre-fabricated items, final inspection and issuing IRN (Inspection Release Note).Review daily reports like DWR, PMI report, and PWHT reports. Review Hydro/Pneumatic test packages and witness test.

Inspection of Gratings, dimensional checks on fabricated structures/modules.

Verification Mechanical completion Package. Issue of Non- conformance reports & verification of Corrective/Preventive action, Liaison with client inspectors for inspections of Hold and Witness Point.

Witnessing / Inspection of Tie-In and Hot Tap welding activities.

Prepare Request for Inspection(RFI) to Project Management Team(PMT) and Project Inspection Division through Quality Management Information system(QMIS)

Assign as hydro test engineer for all piping and thermoplastic piping, shop fabrication

10. S K Engineering & Construction Company .Ltd

Work PIPING INSPECTOR.

Location KNPC (Kuwait National Petroleum Company.

Duration March 1998 to 31 may 1999.

Projects KNPC. (SaIbha Refinery). Project- AGR project,

Clint KNPC. Kuwait

Role and Responsibility

Inspection on construction of pipe lines (2” to 45” Diameter)as per the code& procedure.

Inspection on materials with test certificate as per the requirements,

Inspection on Welding consumables on arrival & during process,

Inspection in Dimension wise as per drawing requirements.

visual Inspection on Before, during &after Welding as per needs,

Conducting hydro test on the pipe lines & preparing hydro test package.

Inspection on Construction of welded storage Tanks as per Code (API650).

Conducting tests like Tank circularity &Verticality check, Peaking &banding checking,

On each Shell Course On the Tanks, Vacuum Box Test, RF pad Air Leak

Test, Roof Plate Leak Test, Hydro Test, Tank Foundation settlement during & after Hydro Test, As per Procedure. Inspection on SS piping fit

Offering NDT Requirements like (PT, MT, UT, and RT&PWHT) as per the Code for the storage tanks.

Inspection on new arrival of equipment in Quality Wise, & Maintaining Records.

Inspection before & after installation on Equipment like level-Co-ordination with dumpy level.

Inspection on fabrication of pressure vessel as per the code.

Inspection on ONSHORE & OFF SHORE STRUCTURAL Steel fabrication.

Computer Proficiency

Window Vista, XP, WIN 7, planning software – MS Projects.

Driving License

WB-252********** (India). Validity 31/05/2021.

Family Status: Married; # of Child: One (14+).Family is in India.

Notice period –Immediate

Signed

Kanai debnath Date



Contact this candidate