Resume

Sign in

Welding Power Plant

Location:
San Juan, Philippines
Posted:
October 23, 2019

Contact this candidate

Resume:

KENT BRUDIT A. VILLACERAN

Guindaruhan Minglanilla, Cebu - Philippines

Contact No.: +63-936******* / +63-945*******

E-mail: adanm5@r.postjobfree.com

Position : GTAW / SMAW

Work Summary

Seven (7) years as a welder in different company in oil gas and plant industry. Welding stainless, carbon, duplex, alloy pipes. Welding Pipe support, hand drills, railings, platforms, everything that my superiors want me to do so. Helping pipe fitters to grind, fit-up, pulling chain blocks and lever blocks. Doing housekeeping before the job starts and when the job is already done. Doing my entire job with all my best knowledge. Follow safety rules and regulations of the company to obtain zero defect and good quality of work.

Employment Record

Company : DAEAH International LLC.

Project : Liwa Plastic Industries Complex – EPC 3 Project

Location : Sultanate of Oman

Position : WELDER / GTAW / SMAW

Inclusive date : June 26, 2018 – May 30, 2019 (Overseas)

Duties & Responsibilities

Know how to read Isometric drawing

Working as welder in both GTAW / SMAW/ 6g smaw

Full welding of pipe, 1”& 2 7/8” and over (diameter) with thickness of

GT: 11.0mm GT+SM: Max

Welding carbon stainless and alloy

Prepare proper ventilation when welding starts

Prepare machine and hand tools before welding start

Check hand tools if it in good condition before using

Check cable wires of welding machine and grinder if is it ok

Check ampere suitable for tacking or welding first, before welding starts

Check root gap, bevel, alignment, squareness, filler and steels

Check forging for stainless and alloys steels before welding starts to avoid welding defects

Check always alignments of the pipe to avoid distortion

Remove spatters and arc strikes when welding is already done

Returned unused fillers and electrodes to storage to avoid contamination

Checking welding machine and cover it when it is not in use

Check welding machine panels if is already shutdown if not in use

Check argon cylinders close when welding is already done

Housekeeping before tasks starts and during after the tasks finished

Company : AIR LIQUIDE MIDDLE EAST MFC. RMC FZC / ALMEM

Location : U.A.E.

Position : WELDER / GTAW / SMAW

Inclusive date : October 09, 2015 – December 16, 2016 (Overseas)

Duties & Responsibilities

Know how to read Isometric drawing

Working as welder in both GTAW / SMAW/ 6g smaw

Full welding of pipe, 1”& 2 7/8” and over (diameter) with thickness of

GT: 11.0mm GT+SM: Max

Welding carbon stainless and alloy

Prepare proper ventilation when welding starts

Prepare machine and hand tools before welding start

Check hand tools if it in good condition before using

Check cable wires of welding machine and grinder if is it ok

Check ampere suitable for tacking or welding first, before welding starts

Check root gap, bevel, alignment, squareness, filler and steels

Check forging for stainless and alloys steels before welding starts to avoid welding defects

Check always alignments of the pipe to avoid distortion

Remove spatters and arc strikes when welding is already done

Returned unused fillers and electrodes to storage to avoid contamination

Checking welding machine and cover it when it is not in use

Check welding machine panels if is already shutdown if not in use

Check argon cylinders close when welding is already done

Housekeeping before tasks starts and during after the tasks finished

Company : DAISHEN PLANT – HYUNDAI ENG. CO., LTD.

Project : Oil Refinery Expansion Project (TORE)

Location : Turkmenistan

Position : WELDER / GTAW / SMAW

Inclusive date : April 23, 2014 – April 23, 2015 (Overseas)

Contact Person : Jung Sung Geun (Site Manager)

Contact No. : +82-616****** F: +82-616******

Duties & Responsibilities

Know how to read Isometric drawing

Working as welder in both GTAW / SMAW/ 6g smaw

Full welding of pipe, 1”& 2 7/8” and over (diameter) with thickness of

GT: 11.0mm GT+SM: Max

Welding carbon stainless and alloy

Prepare proper ventilation when welding starts

Prepare machine and hand tools before welding start

Check hand tools if it in good condition before using

Check cable wires of welding machine and grinder if is it ok

Check ampere suitable for tacking or welding first, before welding starts

Check root gap, bevel, alignment, squareness, filler and steels

Check forging for stainless and alloys steels before welding starts to avoid welding defects

Check always alignments of the pipe to avoid distortion

Remove spatters and arc strikes when welding is already done

Returned unused fillers and electrodes to storage to avoid contamination

Checking welding machine and cover it when it is not in use

Check welding machine panels if is already shutdown if not in use

Check argon cylinders close when welding is already done

Housekeeping before tasks starts and during after the tasks finished

Company : DAEWOO E&C

Project : PNG LNG EPC-3

Location : PAPUA NEW GUINEA

Position : WELDER / GTAW / SMAW

Inclusive date : October 20, 2012 – January 16, 2014 (Overseas)

Contact Person : KIM BOCK KIM (HR- Manager)

Address : Jongno-ga SEOUL 110-713

Remarks : Contact No. and Email address as will as company website not indicated on certification given.

Duties & Responsibilities

Know how to read Isometric drawing

Working as welder in both GTAW / SMAW/ 6g smaw

Full welding of pipe, 1”& 2 7/8” and over (diameter) with thickness of

GT: 11.0mm GT+SM: Max

Welding carbon stainless and alloy

Prepare proper ventilation when welding starts

Prepare machine and hand tools before welding start

Check hand tools if it in good condition before using

Check cable wires of welding machine and grinder if is it ok

Check ampere suitable for tacking or welding first, before welding starts

Check root gap, bevel, alignment, squareness, filler and steels

Check forging for stainless and alloys steels before welding starts to avoid welding defects

Check always alignments of the pipe to avoid distortion

Remove spatters and arc strikes when welding is already done

Returned unused fillers and electrodes to storage to avoid contamination

Checking welding machine and cover it when it is not in use

Check welding machine panels if is already shutdown if not in use

Check argon cylinders close when welding is already done

Housekeeping before tasks starts and during after the tasks finished

Company : C.A.T. International Qatar W.L.L.

Project : New Doha International Airport

Location : Doha Qatar

Position : WELDER / GTAW / SMAW

Inclusive date : January 12, 2011 – February 10, 2012 (Overseas)

Contact Person : Rony Mondalak (HR and Admin Mngr.)

Contact No. : +974-******* / +974-******* F: +974-*******

Duties & Responsibilities

Working as welder in both GTAW / SMAW/ 6g smaw

Full welding of pipe, 1”& 2 7/8” and over (diameter) with thickness of

GT: 11.0mm GT+SM: Max

Welding carbon stainless and alloy

Prepare proper ventilation when welding starts

Prepare machine and hand tools before welding start

Check hand tools if it in good condition before using

Check cable wires of welding machine and grinder if is it ok

Check ampere suitable for tacking or welding first, before welding starts

Check root gap, bevel, alignment, squareness, filler and steels

Check forging for stainless and alloys steels before welding starts to avoid welding defects

Check always alignments of the pipe to avoid distortion

Remove spatters and arc strikes when welding is already done

Returned unused fillers and electrodes to storage to avoid contamination

Checking welding machine and cover it when it is not in use

Check welding machine panels if is already shutdown if not in use

Check argon cylinders close when welding is already done

Housekeeping before tasks starts and during after the tasks finished

Company : TRUBARABIA CO. LTD.

Project : QURAYYH COMBINE CYCLE POWER PLANT

Location : K.S.A

Position : WELDER / GTAW / SMAW

Inclusive date : April 17, 2008 – April 26, 2010 (Overseas)

Address : Dammam – K.S.A.

Contact Person : Samir Abdul Raouf (Admin/Support Mngr.)

Contact No. : +966-******** / 6645041 F: +966-********

Duties & Responsibilities

Working as welder in both GTAW / SMAW/ 6g smaw

Full welding of pipe, 1”& 2 7/8” and over (diameter) with thickness of

GT: 11.0mm GT+SM: Max

Welding carbon stainless and alloy

Prepare proper ventilation when welding starts

Prepare machine and hand tools before welding start

Check hand tools if it in good condition before using

Check cable wires of welding machine and grinder if is it ok

Check ampere suitable for tacking or welding first, before welding starts

Check root gap, bevel, alignment, squareness, filler and steels

Check forging for stainless and alloys steels before welding starts to avoid welding defects

Check always alignments of the pipe to avoid distortion

Remove spatters and arc strikes when welding is already done

Returned unused fillers and electrodes to storage to avoid contamination

Checking welding machine and cover it when it is not in use

Check welding machine panels if is already shutdown if not in use

Check argon cylinders close when welding is already done

Housekeeping before tasks starts and during after the tasks finished

Tools and Equiptment used:

Welding Machine

Grinder

L-square

Spirit Level

Electrode Holder

Tig Torch

Cheaping hammer

LANGUAGE

Speak Write Read

English:

Tagalog:

Visaya

Educational Attainment

Vocational

: Bachelor of Science in Commerce

Course Major in Management

University of Cebu

S.Y. 1992-2000

Personal Information

Birth Date : May 11, 1982 Birth Place: Cebu City Age: 35

Height : 5`7 Weight: 75 kls. Gender: Male

Civil Status: Married Religion: Roman Catholic Nickname: Kent

Passport No.P1406431A Date Issued: 27 DEC 2016

Character References will be given upon request

I hereby declare that all the statement above metioned are true and complete to the best of my knowledge and beliefs.

Kent Brudit A. Villaceran

APPLICANT



Contact this candidate