CURRICULUM VITAE
NAME
Nationality
DOB
Contact Details
Home of Record (nearest airport)
Home Address
MOHAMEDIGBAL.A
INDIAN
Mobile No: +974********
Skype:mohamedigbal.abdulrazack
Email : ada149@r.postjobfree.com
CHENNAI AIRPORT
5/73, mariammankovil street,
T.Panapakkam,
Thuravipost,
Villupuram-605601, Tamilnadu, india.
QUALIFICATIONS
2011 B.Tech. Degree in Chemical Engineering
FromAdhiparashakthi Engineering College,Melmaruvathur, with an aggregate of 76%
EXPERIENCED PLANT :
FPSO Operation,Well Head operations
Crude and Vacuum distillation unit(CDU/VDU),SRU Process
Glycol dehydration unit,Amine Recovery unit process(ARU)
DCS & SCADA PANEL OPERATION (YOKOGAWA)
Oil and Gas Gathering Station,Offshore Production Platform
Artificial Lifting System,Gas Compression and Gas Plant
Central Production facility & Tank Farm,Water Treatment & Injection Plant
Chemical dozing unit,Fuel gas system,Flare system.
Distillation columns,Shell and tube, Double pipe type heat.
Exchangers, Centrifugal pump,Positive displacement pumps.
Reciprocating Compressor,Christmas tree,Dilution steam stripper.
Air Blowers,Fin-fan coolers,Power Generation Unit,Propane Chilling Unit
P&ID references such as distillation columns, Compressor, separator, pumps, vessels etc.
CAREER SUMMARY
TOTAL EXPERIENCE: 8.5 YEARS(offshore & onshore)
I. Since June 2018 –QATAR PETROLEUM,QATAR
SENIOR OPERATOR(PANEL& FIELD)
Department: OPERATION
Responsibilities:
DCS Yokogawa Centum-3000 R-3.08 and SCADA Operation
PLC Yokogawa, PLC Mitsubishi, PLC Enerflex, PLC ABB
Accepts shift from off-going Senior Operator with detailed log sheet of operational adjustments and changes during previous shift and hands over job and completed own log sheet in an orderly and efficient manner.
Operates electronic, computerized, sophisticated and critical instruments on plant control panel governing the operation of highly complicated process and non process operating units, such as Catalytic Reformer, high pressure steam boilers, marine terminal loading operations and gas receipt stations.
Constantly monitors control panel, diagnoses abnormal situations, initiates operational adjustments and maintains a continuous check on the operating plants. Takes reading of essential instruments to ensure that equipment is operated within the specified parameters and limits. Records and reports serious operational deviations to the supervisor and takes immediate remedial corrective actions. Implements the emergency procedures as dictated by the circumstances.
Reviews and analyses outside log sheet readings at regular intervals with control room instrumentation to make sure they correlate. Verifies correct operations of rotary and stationary plant equipment.
Reviews laboratory results and makes the necessary fine-tuning of the control panel instruments to ensure that products meet the specified quantities and qualities. Keeps the Shift Supervisor fully advised on all related aspects and obtains guidance when necessary.
Controls operating plant start-ups, shutdowns and emergencies. Includes controlling the alterations of speeds, temperatures, pressures and flow rates as necessary.
Attends the departmental safety, health and good housekeeping meetings. Participates in plant inspection tours, and takes active participation in implementing company policies of safety, health, and loss prevention and quality management.
Discusses all accidents, incidents and near misses with shift supervisor and fellow operators in order to avoid recurrence.
Observes all safety, fire and security rules and regulations, including the use of protective clothing and equipment, and ensures all personnel working in his area comply with safety procedures. Ensures the maintenance of assigned area in a clean and tidy condition.
Performs other similar or related duties, as assigned including training fellow operators, completing log book, conveying messages/instructions to operators for operational adjustments, etc. Works with advanced system Advanced Process Control (APC) system and monitoring the advanced operational system.
Gas Dehydration with MEG, TEG and Molecular Sieve Bed.
Prepared job packs for the area, which include the isolations list, safety pre job check list, commissioning procedures, P & ID marking, punch listing, Blowing, Nitrogen Purging, Pressure and Leak Testing. etc.
Reporting daily shift Activities to Supervisor - Preparing Midnight Readings of Chemicals, Temperature, Pressure, Level, and Shift Status Reports are sending through E-mail to Supervisor.
Reporting of Equipment and Instrument Defects, Unwanted Noises and Leaks immediately to Supervisor and take possible correct action.
Checking and recording the Plant Log Sheet each and every day a variety of readings such as Oil and Gas Flow, Temperature and Pressure.
Identified and troubleshoot process equipment, process problems and worked towards solutions
Maintained daily logs of gas consumption and steam production.
Created, approved and processed lockout/tagout permits for blocking out equipment.
Safely handled plant trips and correctively brought back the system on time.
II. Since July 2014- April 2018
CAIRN INDIA LIMITED, RAJASTHAN.
PRODUCTION ENGINEER
Department: PRODUCTION
Responsibilities:
Follow PTW system, rules, regulations and work procedures applicable to his responsibilities Monitor, control and log imported and produced oil
Control and execute export oil discharge
Monitor and execute ballast operations
Monitor and control Fiscal Metering Unit operation
Monitor and execute bulk chemicals loading and distribution operations
Monitor and record all safety equipment alarms received in the Cargo Control Room
Maintain radio communication with the Process Deck as applicable
Maintain radio communication with the Export Tanker as applicable
Maintain CCR Logbook and storage tank status records
Undertake training relevant to the position requirements
Member of Emergency Response Team
Familiar with preparing Mid Night Reports, Permit To Work and Isolation Registers
Short Term Isolation Register, Long Term Isolations Register, Fire and Gas Override Check Lists, Preparing Production (Oil, Water and gas) Charts (Daily, Monthly and Cumulative) etc.
Preparing PMR- Production Maintenance Request for the equipments to be repaired, Preparing Permits, Risk Assessments, Tool Box Talk, Process and Mechanical Isolation Certificates and recording all for future reference.
Production well testing of oil/gas and water injection wells through separators, Optimization of wells, well head operation (oil and gas).
Pigging crude Pipelines and water injection line,
Undertaking day-to-day production operations & maintenance activities.
Overhaul, repairing, and testing of wellhead valves assemblies,
Operating and normalizing shut down panels,
Monitoring and recording daily pressure and volumes from wellhead sensing points, assisting with data gathering of samples of well bore fluids for lab analysis,
Responsible for the safe loading and unloading of materials and equipment.
Pneumatic panel and equipment operations,
Looking after all operational activities of process control and utility system.
Maintaining the daily records, Involvement / participation in team reviews including HAZOP, Risk Assessment, toolbox talks and safe operating practices.
Fully aware of permit to work system,
Taking active part in shutdown and normalization. Also able to read and interpret written work instructions and technical drawings.
Fully aware of safety and fire equipment’s and high degree of HSE awareness and attentiveness at all working locations of the platform.
Fully conversant with company operating and Maintenance Procedures, HSE Procedure, and relevant Administration Procedure.
Monitoring the steady state operation of chemical injection program, looking after the 2-stage and 3-stage separators and the related equipments, Oil Pumping Facilities, skimmer vessels, chemical dosing, produced water conditioning system, Gas Compressors, and related equipments, Knock-out drums, Gas dehydration and Glycol Regeneration system and their related equipments, Sea water lifting and filtration, Deoxygenating and Pumping etc.
Responsible for maintaining good housekeeping to ensure clean and safe working environment for all employees.
Plant optimization, process troubleshooting, production planning, plant emergency control, implementing safety systems.
Responsible for the plant production, process and equipment is troubleshooting and process optimization.
Planning and preparing SOP’s and MOC according to plant jobs – When carried out Pigging operations and plant modification.
Ensure P&ID’s when new MOC’s carried out by Operation team.
ACTIVITIES:
WELL SERVICE CO-ORDINATION
WELL TESTING CO-ORDINATION
COMMISSIONING RESPONSIBILTIES
PREPARE START UP AND SHUTDOWN PROCEDURE AND EXECUTION
PANEL MONITORNG (DCS AND SCADA)
SLICK LINE ACTIVITY CO-ORDINATION
PIGGING
III.Since July 2011 To July 2014
OIL AND NATURAL GAS CORPOPRATION,
MAHARASHTRA, MUMBAI, INDIA.
Worked as PRODUCTION OPERATOR.
Department: PRODUCTION
Responsibilities:
Experience in Oil and Natural Gas Ltd. in the area of
Centrifugal Three Phase Separator
Gas Treating Unit Pigging Operations.
H2S Stripping Column. Gas compression
Sour Gas Absorber. Storage Tanks (Tank farm)\
Maintain radio communication with the Helicopter as applicable
Maintain radio communication with the supply boats as applicable
Control supply operations and boat traffic in 500m Zone
Sampling of cargo tanks/stripping excess water.
Particular regard for cargo/ballast valve status, tank levels, and operational status of pumps as well as all other cargo /ballast handling equipment.
Critical responsibility for performing tank cleaning and gas freeing operations.
Perform cargo, ballast and tank atmosphere sampling.
Supervise operations and maintenance of production/well testing.
Monitored production of oil, gas, water. Monitored flow rates and line pressures/temps
Tracked fresh water return rates from the fracturing process
Monitored and adjusted separator pressure and levels
Recorded oil and water and gas rates
Practical experience on three-phase mobile Separators, choke manifold, ESD Systems, Rig up and Rig down, Equipment maintenance, re certification arrangement & transportation from base to locations, reporting etc.
Preparation of equipment’s, transportation, and installation on location, operation monitoring and maintenance of sand filter and associated equipment’s. Certification of equipments, associated paper work and reporting of jobs etc.
Logging of plant parameters in log sheets, events in log book and also prepare daily shift reports.
MISCELLANEOUS:
PERSONAL:
Flexible in handling a variety of tasks and shift priorities simultaneously and can work independently and in a team environment.
STRENGTH:
Proactive, hardworking, self-motivated, optimistic and
Believe in gaining knowledge through work. Detail-oriented, accurate, and dependable, with an uncompromising work ethics.
Professional experience regarding procedures in finding and exploiting oil.
In depth knowledge of various well and gas operations.
Knowledge of exploitation and drilling methods
Ability to work in all kinds of working conditions with a flexible schedule
FIRE &SAFETY:
Knowledge of fire & Safety procedure.
Checking and operation of Fire Fighting Equipment’s such as Extinguishers like Foam, DCP, CO2, Fire Water Pump, and Jockey Pump.
Familiarize with Deluge valve system Fire Hose Reel, Fire sprinkler systems and also fire detection and fire monitoring systems.
Operation of personal protective equipment’s and breathing apparatus.
Training on HSE, Permit to work, Gas tester, Firefighting and fire prevention
H2S training,
PASSPORT DETAILS:
Passport Number : L5724995
Date of issue : 15/01/2014
Date of expiry : 14/01/2024
Place of issue : CHENNAI
DECLARATION:
I hereby declare that all the above mentioned facts are true and complete to best of my knowledge.
DATE : SIGNATURE: MOHAMEDIGBAL
PLACE: SIGN :