Technician Human Resources
Resume:
CURRICULUM VITAE
SR.INSTRUMENT COMMISSIONING TECHNICIAN
PERSONAL
NAME : BHUPESHKUMAR ISHWARBHAI PATEL
DATE OF BIRTH : 22/12/1984
NATIONALITY : INDIAN
MARITAL STATUS : MARRIED
PASSPORT NO : Z-2713715
PLASE OF ISSUE : SURAT
DATE OF ISSUE : 10/01/2014
VALIDITY : 09/01/2024
PERMANENT ADDRESS
: AT& POST-DANTI, SATADIA STREET,
VIA-MAROLI BAZAR, TA-JALALPOR
DIST-NAVSARI, STATE-GUJARAT
P. CODE NO 396436, I N D I A
TEL.- 91-263*-******
MOBILE – 91-999*******,+919*********
Email - ***********@*****.***.**
QUALIFICATION
Passed S.S.C. (Secondary School Certificate) Exam.
Passed Diploma in instrumentation eng. At Dyaneshwar Vidhyapith Pune, Maharastra.
TRAININGS & CAREER ACHIEVEMENTS
MEGAMAS TRAINING CO. SDN BHD BRUNEI (OPITO)
ABU DHABHI 3 TIMES COMPLET THIS OFFSHORE TRAININGS.
Tropical BOSIET including Travel Safely by Boat & Helicopter
Health & Safety
Health Risk Assessment
Emergency Breathing System: underwater with breathing apparatus
Offshore safety & Survival,Huet
PERSONAL STRENGTHS
Strong in Interpersonal Communication
Flexibility & Ability to Work in different Circumstances
Focused on company objective and Approach to meet the Desired Results
Languages Known: English, Hindi, Gujarati
COMPEX ATEX/IECEx Instrument & Electrical Inspection training successfully completed.
SAFETY TRAINING COURES:
Undergone following HSE Course for SIPD Iraq, as follow Health, Safety & Environment Induction (HSE IND)
H2S Training `
Fire Fighting
HSE Tools & Skills
SLS (safety Leadership Supervisor)
CMS (Coaching and Monitoring Course)
PTW (Permit to Work System)
AGT (Authorized Gas Tester)
PICWS (Person in charge at work site)
PTW Applicant
CSU (Commissioning start up unit)
COMPUTER KNOWLEDGE:
Operation Systems: DOS, Windows 95/98/XP
Application: MS-Office 2003 (MS-Word, MS-Excel, MS-Power Point, MS-Outlook)
SAFATY AT WORK
•Borouge HSE guideline
•Borouge Permit to work system
•Borouge LockOut TagOut system
•PPE
•MSDS
•Drain/vent/isolation of Instrument
•Bypass/Forces from control system
SAFATY AT WORK
•Proper process bypass
•Proper Tools and equipments
•Safety while working at height
•Proper PPE for special chemicals
•Communication with other department
•Proper reporting
PERMIT TO WORK RECIVER
•HSE Induction
•Permit To Work
•Basic Life Support (First AID)
•Job Hazards Analysis
•H2S Escape & Awareness
•Gas Tester
•Supervisor Safety
HAVE KNOWLEDGE OF.READING & UNDERSTANDING
P& ID (PEFS/UEFS)
Data Sheet
Location Drawing
Loop Drawing
Instrument Hook up Drawing
Commissioning Procedures
Piping Isometric
Cable Schedule
Junction box Schedule
Panel wiring Drawing
Cable Routing Drawing
Tray Routing Drawing
DCS/PLC functional logic Drawing
JOB EXPERINCE
ESSAR CORPORATE HUMAN RESOURCES, SURAT(HAZIRA) INDIA
Position : INSTRUMENT COMMISSIONING SUPERVISOR
Working Thru : ESSAR LEAMING CENTER HAZIRA, SURAT.
Period : JULY 2016 TO TILL DATE
Industry : Steel industy.
Nature of Job : Personally I have done in Commissioning & Field Calibration Ability, with all types of Instrument & Process Instrument Installation, Loop Checking . Worked with PT,TT,FT,LT, ESV,MOV,PCV,FCV, Installation, Testing & Commissioning, Installation, Calibration, Maintenance of Control valve with positioner & I/P convertor and shutdown valves.Loop checking of all instrument & commissioning. I can able to operate HART 275-375,475.Calibration, loop checking, Functional Test,for ABB Field Bus System & Testing of Various Types of Transmitters,Switches, Control Valves,Monitoring Instrumentation. ESD Valve Timing Checking Calibration of Transmitters, Vibration Probe & Commissioning of Plants
SHELL IRAQ PETOLIUM DEVLOPMENT BASRA IRAQ
Position : INSTRUMENT MAINTANCE AND COMMISSIONING TECHNICIAN
Working Thru : SIPD Majnoon project
Period : APRIL 2014 TO MAY 2016.
Industry : Oil Field & Gas
Able to do Troubleshooting and maintenance of all types of Gas Turbines devices and all process instruments .
Ability to use and interpret phase testers, Repair or replace control devices such as switches, multimeter instrument, megohmmeter and proximity sensors, pushbuttons, contactors, motor other testing equipment starters, transmitters, etc
Good skill to prepare work order and able to change suitable change in it.
Have to do good communication with CRO,Field Operators, PTW Co ordinators, and all production departments. Have to report and notify all trouble belongs to instrument and process.
Good talent to prepare JHA and Tool box talk risk identification chart.
Calibration, Proactive & Shut down Maintenance, Configuration of new loops depending upon the process requirements.
Preparing & Maintaining I/O List.
Reviewing Engineering documents like loop drawings, panel drawing, JB Schedule, Cable Schedule, Trip/Interlocks, Calibration Charts.
Reviewing Engineering documents like loop drawings, panel drawing, JB Schedule, CableSchedule. Trip/Interlocks, Calibration Charts.
SHELL MAJNOON PROJECT, BASRA, IRAQ.
Position : INSTRUMENT COMMISSIONING TECHNICIAN
Working Thru : SIPD Majnoon project through Wood Group PSN
Period : APRIL 2013 TO MARCH 2014.
Industry : Oil Field & Gas (ONSHORE/OFFSHORE )
Nature of Job : Initially during project stage in Erection Worked with PT,TT,FT,LT, ESV,MOV,PCV,FCV, Installation, Testing & Commissioning, Installation, Calibration, Maintenance of Control valve with positioner & I/P convertor and shutdown valves.Loop checking of all instrument & commissioning. I can able to operate HART 275-375,475.Calibration, loop checking, Functional Test, Commissioning Instrument System emertino delta v Sentem System . Work I involved in calibration Of control valve,on off valve, HIPPS valve,ESD,& PSD valve,open path gas detecter,H2s RTC1000 Ray System detecter,,hydrogen detecter,Smart Transmitters and Vibration with Instrument cable termination, Loop Checking all of Instrument DCS & Field side and Plant Commissioning etc.
ADMA OPCO OFFSHORE WIP 2.
Position : SR. INSTRUMENT COMMISSIONING TECHNICIAN
Working Thru : PROJECO.
Period : JUNE 2012 DECEMBER 2012.
Industry : Oil Field & Gas (OFFSHORE )
Nature of Job : Initially during project stage in Erection, Commissioning Instrument System Yokogava Sentem VP in the offshore platform in Abudhabhi Oil Compny. Work I involved in calibration Of control valve &Smart Transmitters and Vibration with Instrument cable termination, Loop Checking all of Instrument DCS & Field side and Plant Commissioning etc.
SAIPEM ALGERIA.
Position : INSTRUMENT COMMISSIONING SUPERVISOR
Working Thru : G.P.S SAIPEM.
Period : MAY 2012 TO JUN 2012.
Industry : Oil Field & Gas ( ONSHORE/OFFSHORE )
Nature of Job :Work I involved in calibration Of control valve &Smart Transmitters and Vibration with Instrument cable termination, Loop Checking and trouble shooting commissioning of all of Instrument DCS & Field to sis side etc.
ESSAR CORPORATE HUMAN RESOURCES, SURAT(HAZIRA) INDIA
Position : INSTRUMENT TECHNICIAN
Working Thru : ESSAR LEAMING CENTER HAZIRA, SURAT.
Period : JULY 2011 TO APRIL 2012.
Industry : Steel industy.
Nature of Job : Personally I have done in Commissioning & Field Calibration Ability, with all types of Instrument & Process Instrument Installation, Loop Checking . Worked with PT,TT,FT,LT, ESV,MOV,PCV,FCV, Installation, Testing & Commissioning, Installation, Calibration, Maintenance of Control valve with positioner & I/P convertor and shutdown valves.Loop checking of all instrument & commissioning. I can able to operate HART 275-375,475.Calibration, loop checking, Functional Test,for ABB Field Bus System & Testing of Various Types of Transmitters,Switches, Control Valves,Monitoring Instrumentation. ESD Valve Timing Checking Calibration of Transmitters, Vibration Probe & Commissioning of Plants
SINGLE BUOY MOORINGS TNC OFFSHORE
Position : SR. INSTRUMENT COMMISSIONING TECHNICIAN
Working Thru : CEGELEC
Period : AUG 17 TO MAY 2011.
Industry : Oil Field & Gas (ONSHORE/OFFSHORE )
Nature of Job : Initially during deep panuke project encana stage in Erection, Maintenance Service & Commissioning Instrument System in the offshore platform in single buoy moorings Compny. Work I involved in calibration Of control valve &Smart Transmitters and Vibration with Instrument cable termination, Loop Checking all of Instrument DCS & Field side and Plant Commissioning etc.
ADMA OPCO OFFSHORE
Position : SR. INSTRUMENT COMMISSIONING TECHNICIAN
Working Thru : CEGELEC.
Period : JULY 2010 TO AUG 2010.
Industry : Oil Field & Gas (OFFSHORE )
Nature of Job : Initially during project stage in Erection, Maintenance Service & Commissioning Instrument System in the offshore platform in Abudhabhi Oil Compny. Work I involved in calibration Of control valve &Smart Transmitters and Vibration with Instrument cable termination, Loop Checking all of Instrument DCS & Field side and Plant Commissioning etc.
c
ESSAR CORPORATE HUMAN RESOURCES, SURAT(HAZIRA) INDIA
Position : INSTRUMENT TECHNICIAN
Working Thru : ESSAR LEAMING CENTER HAZIRA, SURAT.
Period : DISEMBER 2008 TO JULY 2009
Industry : Steel industy.
Nature of Job : Initially during project stage in erection,Maintenance Service& Calibration, Transmeter,valve,switches,gauges,detecters,fisher Control valve,DVC 6000,6010&6020 Series Smart type, Hart 275&375 field Communicator enerson, Vibratio with Instrument cable termination, Loop Checking, Installation all of Instrument DCS & Field and Plant Commissioning etc,.
ABUDHABHI OIL COMPNY.JAPAN
Position : INSTRUMENT TECHNICIAN
Working Thru : AL FALAHI MAINTENANCE&SERVICE EST.
Period : OCTOBER 2008 TO NOVEMBER2008.
Industry : Oil Field & Gas (OFFSHORE )
Nature of Job : Initially during project stage in Erection, Maintenance Service & Commissioning Instrument System in the offshore platform in Abudhabhi Oil Compny. Work I involved in calibration Of control valve &Smart Transmitters and Vibration with Instrument cable termination, Loop Checking all of Instrument DCS & Field side and Plant Commissioning etc.
BRUNEI SHELL PETROLIUM CO. BRUNEI
Position : INSTRUMENT TECHNICIAN
Working Thru : M/s- S.K.S. SDN. BHD. CO. (SKSWOOD)
Period : MARCH 2008 TO JUNE 2008.
Industry : Oil Field & Gas (OFFSHORE & ONSHORE)
Nature of Job : Initially during project stage in Erection, Construction & Commissioning Instrument System in the offshore platform in Brunei shell. Work I involved in calibration Of control valve &Smart Transmitters and Vibration with Instrument cable termination, Loop Checking all of Instrument DCS & Field side and Plant Commissioning etc.
DUBAL REFINERY DUBAI U.A.E.
Position : INSTRUMENT TECHNICIAN
Working Thru : J.R. McDERMOTT MIDDLE EAST INC
Period : DECEMBER 2006 TO OCTOBER 2007.
Industry : Petrochemical and Refinery.
Nature of Job : Worked on calibration of all types Transmitters (Rosemount, Smart, Honeywell, St-3000, and Foxboro), switches, Control Valves (Fisher, Flow Serve, Mesoneillan, Valtek), on – Off Valve, ESD Valve. We are involved in loop checking, Trouble shooting, commissioning of Petrochemical and Refinery.
RELIANCE INDUSTRIES JAMNAGER, INDIA
Position : INSTRUMENT TECHNICIAN
Working Thru : GUJARAT STATE PETRONET LIMITED, SURAT,
Period : OCTOBER 2005 TO OCTOBER 2006.
Industry : Petrochemical and Refinery.
Nature of Job : Initially during project stage in erection, Calibration, Loop Checking, Installation, Commissioning, Pre Commissioning, Process control Instrument.
RELIANCE INDUSTRIES SURAT(HAZIRA) INDIA
Position : INSTRUMENT TECHNICIAN
Working Thru : GUJARAT STATE PETRONET LIMITED, SURAT,
Period : OCTOBER 2004 TO JULY 2005.
Industry : Petrochemical and Refinery.
Nature of Job : Worked for Maintenance of Refinery. Job involves Preventive maintenance, Calibration, Loop Checking, Trouble shooting of field instrument and control system. Re Installed of Process control instruments.
KRISHAK BHARTI CO-OPRERATIVE LIMITED, SURAT(HAZIRA) INDIA
Position : INSTRUMENT TECHNICIAN
Working Thru : KRIBCO LIMITED KAWAS, SURAT.
Period : OCTOBER 2003TO OCTOBER 2004.
Industry : Fertilizer
Nature of Job : Initially during project stage in erection, Calibration, Loop Checking, Installation, Commissioning, Pre Commissioning.
JOB PROFILE
Familiar with Oil and Gas standard.
Familiar with HSE standard and practices. Participation in Monthly, Weekly HSE (Health Safety and Environment) Meeting Emergency Drills and HSE Audits. Fully Conversant With All The Safety Precaution And Technique Followed In Oil And Gas Industries.
Working experience in installation, commissioning, pre commissioning, loop checking, start-up activities and Electrical & Instrument Maintenance Division, for corrective and preventive maintenance of oil & gas, refinery, petrochemicals, fertilizers. (Offshore & Onshore).
Thought my experience I have been associate in all accepts calibration, Loop Checking, Commissioning of process instrument with both Pneumatic & Electronic. This includes installation, calibration, conduit, tray works, cable laying, termination of junction box, panel board wiring.
Good Knowledge over Calibration of all types’ instruments. Transmitter (Pressure, Level, Flow, Temperature), Switches, Control valve, ESD valve, On-Off valve, Solenoid valve, I/P Converter, Vibration Monitoring, Fire & Gas System Such As Smoke Detector, Gas Detector (H2S, CO) Ultra Violet Detector, Thermal Detector, Break Glass Units.
Well aware of P&ID, Interlock Logic ladder diagrams, Loop checking and Maintaining good housekeeping
Familiar with SFC (Smart Field Communicator), Hart Communicator (Model 275 & 375), Brain Terminal (BT 200).
A Challenging position, utilizing skill and knowledge developed through my education with opportunity for professional growth developed based on performance.
Thanking You,
YOUR FAITHFULLY
BHUPESH PATEL
Contact this candidate