Enoch Kabutey

*** ****** ******, ******* ** *****

Cell: 724-***-****

acz6qo@r.postjobfree.com

Career Objectives- To advance in Repair and Maintenance/Operation in a multinational organization with respect to various services to customers.

Strength and Achievements

Willingness to learn other product

Easily adaptable

Effective leader and a communicator

Very hard working and open-minded

Working on various Drilling tools with respect to maintenance, repair and calibration examples Mud motors, LWD tools Directional, Gamma as well Electro Magnetic Telemetry (EMT).

Education / Certification/Certificate of Achievements

BSc (hons) Mechanical Engineering at Kwame Nkrumah University of Science and Technology, Kumasi-Ghana(9/1996-6/2000)

Sperry Drill Course (2nd June-20th June 2008)

M/LWD District Lab Directional and Solar Maintenance( Completed on April 10 2009)

EMMWD Level 1 Repair and Maintenance(completed on February 28 2009)

MLWD District Lab Positive Pulser Maintenance(Completed on April 16 2009)

iNETVU Professional Installer (Completed on March 9 2009)

Certified IPC Specialist(Completed on October 26 2009)- Would recertify in Jan 23- 24 2012

Front Line Supervisor Training from October 11-13 2011

Very proficient in SAP( Plant Maintenance, Inventory and Procurement as well as Asset Management Integration)

PLC programming and programming HMI software; Ethernet, Serial communication

Maintenance, install and repair of instrumentation, such as: flowmeters, yokogawa,, Coriolis meter, transducers, densitometers and controllers.

As well as 4-20ma wiring system

Hi Pot testing module for green energy

Professional Experience:

Broadband Express/Kannan Communications, Washington PA, November 2016 to Present

Field Cable Installation Technician

Installation or repair of cable TV, telephone and internet services.

(Per installation specifications) Install and configure all customer equipment for advanced services.

Communicate effectively with customers and coworkers/supervisors

Excellent customer service skills

Attention to detail

Aquion Energy, Pittsburgh, PA, May 2016 – November 2016

Test Technician

Maintain a safe work environment within the department and on each job.

Ensure quality of work showing an eye for detail.

Responsible to identify areas for improvement, and the use of Non-conformance Reports.

Perform work in accordance with CEC documented policies and procedures.

Complete all applicable quality records.

Test built batteries for specific configurations using Maccor software

Communicate to Engineers as well as managers for further development and design

ATI, Brackenridge, PA, Jan 2016 – Feb 2016

Water Treatment Operator

Monitoring water supply system to steel mill

Collects water samples and performs water quality analyses. Provides results to the shift operator.

Calibrates laboratory equipment and verifies online instrumentation. Conducts quality assurance and quality control analyses.

Assists in monitoring and operating individual water treatment processes, and appurtenant systems such as solids removal, dewatering, gray water disposal and emergency power systems either manually or using the Supervisory Control and Data Acquisition system

Notifies the Shift Operator of adverse monitoring results or operational issues

FTSI (Fractech Services), Eighty Four, PA, Jun 2014 – Oct 2015

Field Electronic Technician

Responsible for wiring of new/rebuilt pumps, control boxes, blenders, and blender data acquisition (DAQ).

Conducts troubleshooting of new/rebuilt pumps, control boxes, blenders, and blender data acquisition (DAQ). Responsible for completion of cable building and technical communication

Performs entry level tasks such as troubleshooting pumps, blenders, TCVs, and cable building with constant supervision.

Troubleshoots and repairs electrical/electronic equipment including but not limited to programmable controls, power supplies, instrumentation, gages and test equipment.

Responsible for programming and reprogramming PLC’s depending on the situation so as to ensure communication with the rest of equipment like blenders, hydration units and pumps for fracturing process in oil and gas well completion jobs.

Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved.

Maintains company-required performance and maintenance records for identified equipment

Wiring field instruments with 4-20mA wiring of pressure/flow transducers as well as simulation

Alstom Grid (Now GE Alstom), Aug 2013 – Mar 2014

Assembler

Building disconnect switches for the power industries

Halliburton Energy Services, Ghana, Jun 2011 – Nov 2013

Sperry Drilling - R&M Lead

Organize and coordinate activities surrounding the repair and maintenance of down-hole, electronic and surface equipment for our Sperry Drilling Services division.

Instruct employees on the proper operation and maintenance of equipment, train new technicians, and develop skills of current workers.

Other responsibilities include, monitoring down-hole equipment operations, ensuring that maintenance and safety procedures are followed, maintaining inventory, and promoting safety, quality improvement process awareness, and teamwork.

Maintain calibration report of all test equipment as well as inspection reports of all downhole tools.

Ensure that shop floor is up to ISO 9001 standards ie creating homes for every piece of equipment and instrument.

Liaise with warehouse to maintain inventory as well as setting MRPs

Liaison between technician and MWD coordinate

PPR manager for 15 DD/ MWD technicians

Provide technical support to the field with respect to all surface equipment and down hole tools

Training and supporting technician in the day to day work

Halliburton Energy Services, Carmichaels, PA & Odessa TX, Mar 2007 – Jun 2011

Sperry Drilling - MWD electrical/mechanical IV, Aug 2010 – Jun 2011

Liaison between MWD technicians and MWD coordinators

Providing technical support to the field

Testing/calibration of down hole tools

Repair/build computers and RFD

Training and supporting technician in the daily work

MWD Electrical/Mechanical Technician III, Aug 2009 – Aug 2010

Testing and calibration of down hole tools

Training/lead new technicians,Repair/build computers

Sperry Drilling - MWD Electrical/Mechanical technician II, Nov 2008 – Aug 2009

Building/ inventory kits

Testing and repair surface equipment

Liaise with MWD coordinator for upcoming jobs and prepare for job ready

DD mechanical technician II, Jun 2008 – Nov 2008

Liaise with supervisor on upcoming jobs, mobilize required tools via the DD coordinator request for job ready.

Shipping and receiving tools before and after jobs

Mobilize damaged equipment for machine shop for repair

Mobilize power section for reline and rechrome and communicate with the vendor for needed documentation

Alert NDT inspectors for any finding on parts after their inspection

Build bearing pack, CV, power section QA and motor build

SP01-DD mechanical technician I, Mar 2007 – Jun 2008

Liaise with supervisor on upcoming jobs; mobilize required tools via the DD coordinator request for job ready.

Shipping and receiving tools before and after jobs

Mobilize damaged equipment for machine shop for repair

Mobilize power section for reline and rechrome and communicate with the vendor for needed documentation

Alert NDT inspectors for any finding on parts after their inspection

Build bearing pack, CV, power section QA and motor build

Other Experiences:

Teremu Medical Corporation, Jun 2006 – Mar 2007

Utility Worker

Manual and/or repetitive job duties in support of the production department.

Responsible to follow requirements of applicable national and international regulations.

Work safely and perform quality work.

Packs, bags, inspect weighs, and moves product or product parts.

Maintains clean work area.

Participates in project performance team meetings on behalf of the job unit in order to provide ideas, methods, or processes for unit/company performance improvement.

Associate is responsible to follow requirements of TMC Quality System; including but not limited to: process controls, inspection procedures, document/data control, and change control practices.

Performs other job related duties as assigned.

Rite Aid Distribution Center, Perryman, MD, Mar 2003 – Jun 2006

Equipment Operator

Drive electrical powered industrial truck equipped with lifting devices, such as a forklift, to push, pull, lift, stack, tier, or move products, equipment or materials in the distribution center.

Position fork over/under/around loaded pallets, skids, boxes, products, or materials to transport to a designated area. Unload and stack pallets, boxes, or materials by raising and lowering lifting device.

Use scanner to scan boxes.

Conduct safety sweep.

Ebenab Inc., Jun 1998 – Mar 2003

Assistant manager

Directs the day-to-day activities of a central warehouse facility that is responsible for the distribution of product

Plans, supervises and records, either by manual or automated inventory control system, the receipt, storage and distribution of equipment, supplies and specialty items in centralized warehouse operation.

Compiles and submits regular reports of damaged or outdated stock or supplies, over/under shipments, return of goods to manufacturer, etc.

Contacts manufacturers and customers/dealers to reconcile invoice discrepancies, shortages or over shipments or to arrange for emergency shipments or requisitions.

Develops and implements storage systems and procedures to obtain maximum use of space and storage areas

Ekofah Distribution, May 1995 – May 1998

Supervisor

Oversees inventory control, including maintaining accurate daily inventory, monitoring inventory variances and supervising periodic full physical inventories.

Supervises maintenance of facilities, product handling equipment and inventory warehousing control systems, manual or automated.

Provides daily oversight and supervision for assigned staff

Coordinates all warehousing activities with management and administration

Champions safe working conditions.

Contact this candidate