Post Job Free

Resume

Sign in

Gypsum carpenter/ Doha Qatar

Location:
Bacoor, CALABARZON, Philippines
Posted:
April 28, 2017

Contact this candidate

Original resume on Jobvertise

Resume:

RODELIO P. MAHILUM

Address : Cavite, Philippines

Mobile number : +639-*********

acz06n@r.postjobfree.com / acz06n@r.postjobfree.com

E-mail Address :

Position Desired : Carpenter/ Gypsum Installer

OBJECTIVE

To obtain in challenging position within your reputable and established firm,

able to practice my skills and abilites

WORK EXPERIENCE

Global Art

Office & Home furniture, Interior Design & Projects

Doha, Qatar

Jan 3 2013 Jan 3 2015

Gypsum Installer/Painter/Carpenter

DUTIES AND RESPONSIBILITIES:

- Applies coats of paint, varnish, stain, enamel, or lacquer to decorate and protect interior or exterior

surfaces, trimmings, and fixtures of buildings and other structures: Reads work order or receives

instructions from supervisor or homeowner regarding painting.

- Smooths surfaces, using sandpaper, brushes, and removes old paint from surfaces, using paint remover,

scraper, wire brush, or blowtorch to prepare surfaces for painting.

- Fills nail holes, cracks, and joints with putty, plaster, or other filler, using putty knife.

- Selects premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances

to prepare paint that matches specified colors.

- Removes fixtures, such as pictures and electric switchcovers, from walls prior to painting, using

screwdriver.

- Spreads dropcloths over floors and room furnishings, and covers surfaces, such as baseboards, door

frames, and windows with masking tape and paper to protect surfaces during painting.

- Paints surfaces, using brushes, spray gun, or paint rollers.

- Simulates wood grain, marble, brick, or tile effects.

- Applies paint with cloth, brush, sponge, or fingers to create special effects.

- Erects scaffolding or sets up ladders to perform tasks above ground level.

- May be designated according to type of work performed as Painter, Interior Finish; Painter,

Maintenance; or according to type of material used as Calciminer; Varnish

- Plans gypsum drywall installations, erects metal framing furring channels for fastening drywall, and

installs drywall to cover walls, ceilings, soffits, shafts, and movable partitions in residential, commercial,

and industrial buildings

- Reads blueprints other specifications to define method of installation, work procedures and material, tool

and work aid requirements

- Lays out reference lines & points for use in computing location and position of metal framing and

furring channels marks position for erecting metalwork, using chalkline

- Measures, marks, and cuts metal runners, studs, and furring channels to specified size, using tape

measure, straightedge and hand portable power cutting tools

- Secures metal framing to walls and furring channels to ceilings, using hand portable power tools

- Measures marks cutting lines on drywall, using square, tape measure, and marking devices

- Scribes cutting lines on drywall, using straightedge and utility knife breaks board along cut lines

- Fits fastens board into specified position on wall, using screws, handtools, portable power tools, or

adhesive

- Cuts openings into board for electrical outlets, vents, or fixtures, using keyhole saw or other cutting tools

- Measures, cuts, assembles, and installs metal framing decorative trim for windows, doorways, and vents

- Fixing any kinds of office and house furniture in different varities

- Prepare the layout of the project.

- Estimate height, width, length, and other proportions.

- Select materials.

- Work with blueprints or instructions from supervisors.

- Work with materials such as wood, plastic, fiberglass, or drywall.

- Utilize chisels, planes, saws, drills, and sanders to repair and erect structures.

- Join materials with nails, screws, staples, or adhesives.

- Work on top of stilts, ladders, and the top beams of buildings.

- Check work along the way to ensure it's up to code and specifications.

- Use levels, rules, plumb bobs, framing squares, and surveying equipment to ensure everything is level

and secure.

- Work with prefabricated buildings.

- Install cabinets and molding.

- Remodel homes and businesses.

-

- Create structures for pouring concrete.

Build concrete forms for tunnel or sewer construction project.

- Replace panes of glass, ceiling tiles, and doors.

- Repair or build furniture.

- Install partitions, doors, and windows.

- Move and install machinery.

DDT KONSTRACT, INC

Manila, Philippines

Contractor Engineers

March 2011 - Oct 2012

Carpenter/ Gypsum Installer

- Plans gypsum drywall installations, erects metal framing furring channels for fastening drywall, and

installs drywall to cover walls, ceilings, soffits, shafts, and movable partitions in residential, commercial,

and industrial buildings

- Reads blueprints other specifications to define method of installation, work procedures and material, tool

and work aid requirements

- Lays out reference lines & points for use in computing location and position of metal framing and

furring channels marks position for erecting metalwork, using chalkline

- Measures, marks, and cuts metal runners, studs, and furring channels to specified size, using tape

measure, straightedge and hand portable power cutting tools

- Secures metal framing to walls and furring channels to ceilings, using hand portable power tools

- Measures marks cutting lines on drywall, using square, tape measure, and marking devices

- Scribes cutting lines on drywall, using straightedge and utility knife breaks board along cut lines

- Fits fastens board into specified position on wall, using screws, handtools, portable power tools, or

adhesive

- Cuts openings into board for electrical outlets, vents, or fixtures, using keyhole saw or other cutting tools

- Measures, cuts, assembles, and installs metal framing decorative trim for windows, doorways, and vents

- Fixing any kinds of office and house furniture in different varities

- Prepare the layout of the project.

- Estimate height, width, length, and other proportions.

- Select materials.

- Work with blueprints or instructions from supervisors.

- Work with materials such as wood, plastic, fiberglass, or drywall.

- Utilize chisels, planes, saws, drills, and sanders to repair and erect structures.

- Join materials with nails, screws, staples, or adhesives.

- Work on top of stilts, ladders, and the top beams of buildings.

- Check work along the way to ensure it's up to code and specifications.

- Use levels, rules, plumb bobs, framing squares, and surveying equipment to ensure everything is level

and secure.

- Work with prefabricated buildings.

- Install cabinets and molding.

- Remodel homes and businesses.

- Create structures for pouring concrete. -

Build concrete forms for tunnel or sewer construction project.

- Replace panes of glass, ceiling tiles, and doors.

- Repair or build furniture.

- Install partitions, doors, and windows.

- Move and install machinery.

ATTRACTION

BUILDERS

Manila Philippines

March 2010 - Feb 2011

Gypsum Installer /Painter

- Applies coats of paint, varnish, stain, enamel, or lacquer to decorate and protect interior or exterior

surfaces, trimmings, and fixtures of buildings and other structures: Reads work order or receives

instructions from supervisor or homeowner regarding painting.

- Smooths surfaces, using sandpaper, brushes, and removes old paint from surfaces, using paint remover,

scraper, wire brush, or blowtorch to prepare surfaces for painting.

- Fills nail holes, cracks, and joints with putty, plaster, or other filler, using putty knife.

- Selects premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances

to prepare paint that matches specified colors.

- Removes fixtures, such as pictures and electric switchcovers, from walls prior to painting, using

screwdriver.

- Spreads dropcloths over floors and room furnishings, and covers surfaces, such as baseboards, door

frames, and windows with masking tape and paper to protect surfaces during painting.

- Paints surfaces, using brushes, spray gun, or paint rollers.

- Simulates wood grain, marble, brick, or tile effects.

- Applies paint with cloth, brush, sponge, or fingers to create special effects.

- Erects scaffolding or sets up ladders to perform tasks above ground level.

- May be designated according to type of work performed as Painter, Interior Finish; Painter,

Maintenance; or according to type of material used as Calciminer; Varnish

- Plans gypsum drywall installations, erects metal framing furring channels for fastening drywall, and

installs drywall to cover walls, ceilings, soffits, shafts, and movable partitions in residential, commercial,

and industrial buildings

- Reads blueprints other specifications to define method of installation, work procedures and material, tool

and work aid requirements

- Lays out reference lines & points for use in computing location and position of metal framing and

furring channels marks position for erecting metalwork, using chalkline

- Measures, marks, and cuts metal runners, studs, and furring channels to specified size, using tape

measure, straightedge and hand portable power cutting tools

- Secures metal framing to walls and furring channels to ceilings, using hand portable power tools

- Measures marks cutting lines on drywall, using square, tape measure, and marking devices

- Scribes cutting lines on drywall, using straightedge and utility knife breaks board along cut lines

- Fits fastens board into specified position on wall, using screws, handtools, portable power tools, or

adhesive

- Cuts openings into board for electrical outlets, vents, or fixtures, using keyhole saw or other cutting tools

- Measures, cuts, assembles, and installs metal framing decorative trim for windows, doorways, and vents

STEEL INDUSTRIES OPERATOR

Cavite, Philippines

May 2008- Jan 2010

Painter/ Welder

- Perform welding from various departments with help of welding torches and arcs

- Analyze defective equipments and identify appropriate defective equipments and inform supervisors.

- Administer various components and perform welding of clamps, holding and bolts according to

specifications.

- Manage work with help of manual welding machines and melt metals for various processes.

- Monitor all welding processes and ensure absence of any shrinkage and distortion to materials.

- Manage welding work and ensure compliance to all specifications to perform defect work. .

- Maintain disc grinder and perform all cleaning and grinding of metals.

- Operate various manual and automated welding equipments for welding work

- Analyze speed and length of welding arc for all welding process.

- Assemble all components with help of power and hand tools.

- Apply and paint Epoxy primer for preventing rush

EDUCATIONAL BACKGROUND

Secondary Dasmarinas National High School

Dasmarinas city, Cavite

Primary Dasmarinas Bagong Bayan Elementary School

Dasmarinas city, Cavite

PERSONAL INFORMATION

: November 7 1976

Date of Birth

: Filipino

Nationality

: Male

Sex

: Married

Civil Status

: 57

Height

: 130lbs

Weight

: Roman Catholic

Religion

CHARACTER REFERENCES

JERRY ALMARIA

Position : Architect/ Over all in charge office furniture

Company: Global Art Qatar

Address: Doha, Qatar

RAME SANAD

Position : Division Manager/ Over all in charge Interior Design & Projects

Company : Global Art Qatar

Address: Doha, Qatar

ROLDOLFO PANELA

Position : Project Coordinator

Company : DDT Konstract,Inc

Address: Manila Philippines

LEANNE BUENAVENTURA

Position : Project Manager

Company : Attraction Builders

Address: Manila Philippines

ARNEL CRUZ

Position : Project Manager

Company : Steel Industries Operator

Address: Cavite Philippines

I hereby certify that the above information is and correct to the best of my knowledge and belief.



Contact this candidate