To pursue a challenging career as an Instrument technician in a Petrochemical or gas and oil company, where I can utilize my profession- al knowledge and skills for the achievement of the company’s goal, in the field of Instrumentation Engineering, while I continuously grow & learn.
Total Experience 9 Years
Worked as an Instrument Technician in S-CHEM CHEVRON TURNAROUND -2016 through DAR-AL-RIYADH (S-CHEM-JUBAIL KINGDOM OF SAUDI ARABIA)
Worked as an Instrument Commissioning Technician in Reliance Industrial Ltd Under Contract Induspect India Pvt Ltd. (SD-CES) ShutDown.
Worked at UNDO IBN RUSH Project as an Instrument Commissioning Technician service contract in Saudi S.K.KENTZ (KINGDOM OF SAUDI ARABIA)
Worked as an Instrument Commissioning Technician in ONGC OPAL OIL PETROLEUM ADISNAL Project under contract Maire Tecnomount Pvt. Ltd. (India)
Worked as an Instrument Commissioning Technician in QATAR GAS under Contract MANWIER (QATAR).
Worked as an Instrument Technician in OMAN LNG L.L.C under Contract TOCO (OMAN)
WORK EXPERIENCE
1.Organization Name : Induspect INDIA PVT LTD
Client : RELIANCE INDUSTRIAL PVT LTD (SD-CES) Duration : 15/12/2016 to Till to Continue
Role : Instrument Commissioning Technician
2.Organization Name : DAR Al-RIYADH (KSA)
Client : SAUDI CHEVRON PHILLIPS (S-Chem) Duration : 24/09/2016 to 28/11/2016
Role : Instrument Technician
3.Organization Name : The Oman Construction Co LLG (TOCO)
Client : OMAN LNG L.L.C. (OMAN)
Duration : 02/04/2015 to 04/05/2015
Role : Instrument Technician
PROJECT DETAIL
ONGC Opal Oil Petroleum Adisnal, Dahej.
1Organization : Maire Tecnomount Pvt. Ltd.
Client : Engineering India Limited.(Dahej, Bharuch)
Duration : 25/05/2016 to 06/09/2016
Role : Instrument Commissioning Technician
UNDO IBN RUS PROJECT-II
2Organization : S.A. Kentz Co. Ltd, KSA
Client : Arabian Industrial Petrochemical.
Duration : 14/05/2013 to 22/04/2014
Role : Instrument Commissioning Technician.
Distributed Control System up Gradation
3Organization Name : Aarvi Enterprise Pvt.Ltd.
Client : Shall L & NG Plant, Hazira, (Surat)
Duration : 08/01/2013 to 31/03/2013.
Role : Instrument Commissioning Technician
Erection work, Loop/Function Test and Pre-commissioning, Commissioning work responsibilities:-
Distributed Control System up gradation from ABB MOD 300 to ABB 800xA
Distributed Control System up gradation from Centum CS 3000 to Centum VP
Closed loop and open loop test to confirm the continuity of cables. During loop/Function test, simulated the process variable with hand held communicator or from DCS in manual mode for HART communicator and Simulator.
To monitor the function of instruments and Confirmation availability of inputs alarms & switches on DCS coming from field against Alarm & Trip Set-point List and Check Local/ manually the operation & travel of control valves and shut off valves. Also during startup trouble shooting.
Making punch list and Instrument Termination and gladding according to instrument loop diagram and Junction box wiring diagram.
I can read and worked on P&ID, ILD, Instrument Location, Instrument impulse line pneumatic hook up, wiring diagram exe.
Testing, loop check, Calibration, commissioning and servicing of all types field instruments and valves, We remove Process equipment instrument for Mechanical work after finish connect back and Troubleshoot during startup.
I Have experiences in installation, Erection, cabling, Logic/Function Testing, loop checking, pre-commissioning, Commissioning & Maintenance of process control instruments. Fault Diagnosis, Trouble Shooting, panels, and Electronic & Pneumatic instruments such as Transmitters, Controllers, Indicators, Converters, Recorders, Switches and Control Valves etc.
MAINTENANCE DETAIL & ACTIVITY
1.Organization Name : Hofincons Infotech & Industries Vice.
Client : Relince Industries Ltd, Hazira, Surat.
Duration : 15/09/2014 to 22/05/2016
Role : Sr.Instrument Technician
2Organization Name : Mannai corporation (Manwier)
Client : Manwier (Qatar)
Duration : 20/12/2011 to 08/11/2012.
Role : Instrument Technician
3Organization Name : R.K. engineering.
Client : Essar Steel Ltd Mod-5.6, Hazira, Surat.
Duration : 01/05/2009 to 08/12/2011.
Role : Sr.Instrument Technician
4Organization Name : Hofincons Infotech & Industries Vice.
Client : Relince Industries Ltd, Hazira, Surat.
Duration : 05/11/2008 to 25/04/2009
Role : Instrument Technician
Field Instrument Preventive Maintenance.
I have gain knowledge about Preventive Maintenance all types of Field Instrument, Carryout general day to day preventive Maintenance Job, Break Down job, condition Based jobs and shut down jobs. Troubleshoot and resolve field instruments / DCS control related issues and Abnormal Process Variable.
Calibration and installation of different type Transmitter like – PT, FT, TT, and LT.
Calibration and installation of different type switches like – Pressure switch, Flow switch, Level Switch, Temp. switch, Vibration switch.
Calibration and installation of different type Gauge like – Pressure gauge, DP type gauge, Level gauge, Temp. gauge.
Calibration and installation of quality majoring instrument like P.H meter (Model 2018), Humidity & Temp. Meter (Model-337, make Vaisala), and (O2, CO2, CO) analyzer (Fuzzy electronics).
I/P & P/I converters testing and calibration.
Maintenance, servicing and repair of Solenoid valve. UV scanner, Air filter regulator, Buster relay, Trip relay
Maintenance and Calibration of weight scale and wavebrige (Make : Raise scale, Mettler)
Maintenance and Calibration of Different type Control Valve and Control valve Positioner. Maintenance and Servicing of On-off Valve and Control valve (valve size 1” to 3”) Like Glob valve, Ball valve, Butterfly valve, Gate valve, etc.
Maintenance and Service of Pressure Instrument like Pressure Transmitter, venture meter, Pressure gauge, Manometer, Pressure regulator.
Maintenance and Service of Flow Instrument like Rota meter, Orifice plate, Annubar, venture meter, Pitot tube, Vertex flow meter, Magnetic flow meter, Micro Motion, Ultra Sonic.
Maintenance and Service of Level Instrument like Direct method – Bob and top, Sight glass, Level gauge, Indirect method – Pressure type LT, Bubbler type, Interface level DP type, Displacer type, Dry and Wet lag type level, Capacitance type, Radioactive type, Ultra Sonic type.
Maintenance and Service of Temperature Instrument like Temperature gauge, Thermometer, Thermocouple, RTD.
Experienced in the installation proximity’s Probe. Radial, Axial, Key phasor, Termination gap setting, Trouble shooting and simulation field to DCS, Baring Temp, and Winding Temp. Of compressor, Motor, Pump & turbine.
S.S. & Copper, Impulse line tubing, Control valve tubing (tube size 4mm to 12mm) as per hook up drawing. Instrument Termination and gladding according to instrument loop diagram.
I have knowledge about P&ID drawing, Loop drawing, and hook up drawing, Plant lay out drawing.
Knowledge on Fire & Gas detection Instrument like - Smoke detector, Flame detector, Beam detector, MCP, Gas detector.
Work On System
Experience on Distributed Control system (DCS) of Centum Cs 3000, Centum VP Yokogava.
Experience on Distributed Control system (DCS) of C300 Honeywell.
VIBRATION: -
Bentley Nevada (3300 – 3500 Series) which is used for Compressor, Turbine and Centrifugal Pump. Conducting Loop Checking for Bentley Nevada Vibration & Temp. Monitoring System.
I have knowledge about Proxy type probe (Axial, Redial),Speed Sensor (Key Phasor) & Seismic Probe( Body Vibration).
Also Worked with Compressor & Turbine Temperature (Bearing & Winding Temp.) System.
Fire & Gas:-
Instrument installed, Calibration, Trouble shooting, Loop check, function test of HC, O2, Co,Co2 (crocon Detector Flame detector,Heat detector, Smoke detect or Manual call point .
Involve in Loop Check & function test of Fire Water Deluge System.
Worked with Standard Test/Master equipment
HART Communicator :- Rosemount model No:-375,475
:- Yokogawa Model No:- BT-200, YHC 4150
Dead Weight Tester :- Yamatake, Burden berg
Loop Calibrator :- Yokogawa CA-12, CA-11,
:- Fluke 773,771, Druck TRX-II, Ups-III
Pressure calibrator :- Druck DPI-610,615
Multifunction Calibrator :- Scandura B-20, 8500
Temperature Bath, Resistance kit, (TM-820 Druck, Fluke) TK-3 calibrator
Instrument Handled.
Transmitter : Rosemount, Honeywell, Yokogawa
Control valve : Fisher, Flowserve, Valve take, Masoneilan, Metso
Positioners : Fisher, Metso, Mesoneilan, Siemens, ABB, SMC
Switches : Rosemount, Bells, Switzer, Fisher, UE
Gauges : H.Guru, Wika, Thermostatic
M.O.V. : Rotork, Flowserve
Operation Systems: DOS, Windows 7,8,10, XP, vista.
MS-Office (MS-Word, MS-Excel, MS-Power Point, MS-Outlook,)
Mail, Internet,
Hardware and Software
STRENTH: “Quick learning & Hardworking”
I hereby declare that the information furnished above is correct and true to the best of my Knowledge and belief.
Yours Sincerely,
Akshay Anjan