** **. ****’eq El-Ahram

Giza -Egypt

Mobile +2-011********

E-mail Mostafa.abdulrazeq@

gmail.com

Mostafa Abd El-Raziq Abd El-Hameed

Objective

Seeking a challenging position that best fits my international professional industrial automation experience, Specialized in Foxboro DCS and Triconex systems as Senior DCS/Triconex®. Project Application Engineer.

Education

Faculty of Engineering - Cairo University

Major : Electronics and Electrical Communication – class of 2011

Excellent in the graduation project (Robotics), with score of 97%, sponsors

’’ITIDA&HIGH TECH’’, participated in ROBOCON Thailand contest got the 7th place. Brief of Experiences

Implementing the sequence logic for three SIEMENS SG compressors.

Establishing communication packages with many vendors (GE, Allen Bradley, Yokogawa, Emerson, SIEMENS, Enraf, OMNI, ASPEN, OSI PI, PAS, FEAG

(Serial, MODBUS, PROFIBUS, HART, .etc).

Very Good knowledge in networking, Network instructor at the current local office.

Engineering, PreFAT, FAT, SAT, SD, Decommissioning, Commissioning and Sites start up and service.

UNIX, command line, and Shell Scripting.

Networking Cyber Security

Green Field projects and upgrade starting from extracting the control loops from P&ID, complex control loop, system, troubleshooting, Graphics (Symbols, Overlays, and Dynamics) till the Start Up.

Very good knowledge in documentations, test case and V&V testing cycle.

DCS System/Marshalling Cabinets Design.

DCS system staging (Servers & Workstation Installation, Mesh Network

Configuration- Switch Configuration)

EECE employs Trainer for a basic Instrumentation training.

PLC software familiarity (P&ID, Ladder diagram, functional block diagram, cause & Effect diagram and flow chart diagram)

Very strong knowledge in Microsoft package and server installation and Work Experiences

1. Schneider-Electric (Invensys), Nov. 2011 – Present. DCS/Automation Project Engineer

I. DOHA – Qatar (March. 16 –August)

RG Train 1,2 upgrade, Client: RASGAS - Qatar

Site - DCS/Automation Project Engineer – Responsibilities

Database Comparisons / Equalization

N1 Switches to SSA replacement (Live Replacement)

Pre-Shutdown Activities(System Cabinet decommissioning, Stations, wiring, etc) and installing new cabinet and power up, Diode O-Ring Test

Workstation and Server Installation

Server (HOST) AW Replacement, FCP280 Database download and Checks

I/O Checks, and FDSI Communication establish,

SAT

Sustained Performance Test (SPT)

CSA migration

II. DUBI – UAE (Dec. 15 – Feb. 16)

RG Train 1,2 upgrade, Client: RASGAS - Qatar

FAT - DCS/Automation Project Engineer – Responsibilities

FAT general support, system setup for FAT, communication check with the UCM, old System and other packages, HW and IO check,..etc, Cyber security support.

Responsible for all project DB modifications.

P2P alarms configuration after upgrade.

HW FDSI creating and check between the common area and Trains.

CSA merging and updating

Workstation System Checks

Testing the sequence of the Radio links in the offshore

System backups

Powering off system cabinets for shipment.

III. Al Khobar – KSA (July 2015)

SHAYBAH, Client: Saudi Aramco

Site - DCS/Automation Project Engineer – Responsibilities

FF devices configuration and commissioning in the site.

Implementing the Air compressors logic.

FAS (Fire Alarm System) communication establishing and its process displays drawing

(statics and dynamics).

IV. Western desert – Egypt (June 2015)

ASSIL&KARAM project, Badr El-Deen Petroleum company Site - DCS/Automation Project Engineer – Responsibilities

DCS 24h On-call Site Support.

Trends & History recording SW troubleshooting

Modbus communication HW establish and SW implementation.

AMS implementation and FF devices troubleshooting.

On job training for the customer.

V. Kafr El-Sheikh – Egypt (December 2014 – June 2015)

Disouq Fields for Gas Treatment ‘RWE’ project, SUCO Petroleum company Site - DCS//Triconex® Automation Project Engineer – Responsibilities

New Modbus communication systems staging and setup SW/HW for SIEMENS Sales Gas Compressors and recovery Gas Compressor, for Invensys FGS system.

DCS SAT, Start-Up & Commissioning for various devices types (Analogue, digital, Pumps, Heaters, Coolers and HART).

IA SW Day0 installation, FoxView/Draw and PACTware.

PID tuning.

Customizing the CAD (Control Alarm Display) as per the operator requests

DCS 24h On-call Site Support.

Setup history recording SW for process values and generating automatic reports.

Providing as built cabinet drawings.

Modifying SW logic and HMI as required from customer.

Operators training provided in site.

Implementing and testing boiler control logic and sequence Provided by’DEA’, Produced water Pumps, and FANs.

Safety system (Triconex) SW services.

Addition of 25 New Displays (2 Process displays + 23 third party packages displays) and their dynamics configuration.

VI. Beijing – China (Aug 2014 – Sep 2014)

China Nuclear Power Plants: Hainan 2 Nuclear Power Plant project IV&V/Triconex® Engineer – Responsibilities - FAT

DCS PreFAT/FAT for Hardware (cabinets, Control Processor & Field bus modules) acceptance testing.

DCS PreFAT/FAT for Software, control logic & system loading acceptance testing.

Modifying DCS Test Cases for coherent & sequenced logic testing. VII. Beijing – China (June 2014 – Aug 2014)

China Nuclear Power Plants: Hainan 1 Nuclear Power Plant project IV&V/Triconex® Engineer – Responsibilities - FAT

Reviewing DCS SW Test cases & applying the required modification.

DCS PreFAT/FAT for Software, control logic & system loading acceptance testing. VIII. Beijing – China (Feb 2014 – May 2014)

China Nuclear Power Plants: Fujian Fuqing 3 Nuclear Power Plant project IV&V/Triconex® Engineer – Responsibilities - FAT

Reviewing DCS SW Test cases & applying the required modification.

New DCS SW test cases creation.

DCS PreFAT/FAT for Hardware (cabinets, Control Processor & Field bus modules) acceptance testing.

DCS PreFAT/FAT for Software, control logic & system loading acceptance testing.

Downloading the software compounds on real CPs and troubleshooting the download errors.

IX. Cairo – Egypt (June 2013 – Jan 2014)

China Nuclear Power Plants: Fangjishan 2 Nuclear Power Plant project IV&V//Triconex® Engineer – Responsibilities - FAT

Safety system (Triconex® 1E) HW testing.

Studying Relay logic for ECB (Emergency Control Panel) for creation of testing strategy in an efficient manner.

Creating Testing strategy for stand-alone I/O testing for Tricon® (Processor) cabinets.

Creating Testing strategy for BUP (Backup Panel) commands and feedbacks. X. Cairo – Egypt (June 2013 – Aug 2013)

China Nuclear Power Plants: Fangjishan 1 Nuclear Power Plant project IV&V/Triconex® Engineer – Responsibilities - FAT

Safety system (Triconex® 1E) HW testing.

Studying Relay logic for ECB (Emergency Control Panel) for creation of testing strategy in an efficient manner.

Creating Testing strategy for stand-alone I/O testing for Tricon® (Processor) cabinets.

Creating Testing strategy for BUP (Backup Panel) commands and feedbacks.

NC/NC+ & 1E IV&V team member in Egypt to review the following documents:

System Requirements Specifications (SyRS), Software Requirements Specifications

(SRS) and FAT TC’s and test procedures

XI. Mansora – Egypt (June 2013)

EL-MANSOURA company for Gas: Merlose LPG Plant

Site - DCS/Automation Project Engineer – Responsibilities

Installing of new FCP270 and respective Baseplate.

Installation of FBM230 and FBM233 pair on baseplate for the purpose of communication with the newly added devices in the MCC.

Wiring of RS-485 third party Devices to FBM230/231 Termination assemblies

Modification of existing system definition to match the current network architecture.

Performing a Day1 installation on all network stations to update the system to the latest configuration.

XII. Cairo – Egypt (June 2013)

SAMREF Project in Saudi Arabia

DCS/Automation Project Engineer – Responsibilities

Upgrading the current system to the new software provided by Foxboro®.

Re-encoding for Sequence logic to be compatible with the new system Academic skills

XIII. Cairo – Egypt (May 2013)

SAHMAH Upgrade project in Saudi Arabia

DCS/Automation Project Engineer – Responsibilities

Updating Sequence Blocks.

Creating IACC databases and importing/converting the Gateway databases to IACC.

Upgrading the displays to FoxVeiw from the Unix Display manger.

Testing/Verifying converted database integrity using the test displays. XIV. Düsseldorf – Germany (Nov. 2012 – March 2013)

Novey Urengoy Project in Russia -FAT

DCS/Automation Project Engineer – Responsibilities

DCS PreFAT/FAT with customer “Linde –Germany” for the SW and control logic.

Applying changes and finding solutions for changes requested by customer onsite.

DCS HMI Testing and modifications.

Managing the distribution of the new data (SW & HMI) onsite for all the targeted control stations.

DCS FAT for Hardware points on Field Bus Modules installed in the cabinets. XV. Cairo – Egypt (March 2012 – Nov. 2012)

Novey Urengoy Project in Russia

DCS/Automation Project Engineer – Responsibilities

Studying FBDs & P&ID provided by the EPC ‘Linde’ for configuring and building project’s documentations (Test cases and FDS), simple and complex control loops.

Creating HMI and Dynamic Configuration using the Foxboro® programs and tools.

Testing the project’s units internally and covering the modifications plans for the failed loops.

Sending technical queries to the business unit in Germany, and applying their responses on areas needed their assistance, preparing testing documents.

Bulk Generate using workbench tool and Bulk Data Object.

Direct Access for bulk modification

XVI. Cairo – Egypt (Jan 2012 – Feb. 2012)

ME-24007 QG Shell GTL Project - Qatar

DCS/Automation Project Engineer – Responsibilities

Adding a new Controller to the DCS, Communication with a third party System using Modbus communication and communication with a Foxboro system that exists in another Network using Modbus communication.

Remote Engineering for the new Databases and Process Graphics. 2. Telecomax Group Aug 2011 to Nov.

Three months Drive tester engineer before applying to Invensys at .

Built complete Robots (a Manual and Automatics using Micro C) in Egyptian Robocon Computation 2010 and got the sixth place.

C++ Programming Language and Data structure via C++.

using C++ to build up a Data structure for a Hospital Database project with its HMI and search engine project.

Temperature Sensors (Thermistor, Thermocouple, RTU, Semiconductor junction).

Light Level Sensors (Photoconductive cell, Photodiode, Phototransistor).

Equalizer using PID control.

Modern Control Engineering

Embedded Systems, Microcontroller, CAN, Flex ray and Ethernet communication, and state machine design.

Activities

Interpersonal skills

Language

September 2009 - 2011

ROBOCON Egypt and Thailand contest

got the 6th place in Egypt and 7th place in Thailand

English Translator to Vietnam and Mangolia teams September 2008 – April 2010

Steps Towards Progress (STP).

IT team member

Human Resources workshop participant

July 2008 – Present

RESALA

Permanent Member in its charity works.

Excellent oral and written communication, presentation, leadership, Fast learning and selling skills. Self-motivated, good team player and work very good under stress by experience.

Arabic: Mother Tongue.

English: Excellent command in speaking & writing. Personal Info

Date of Birth: 30/09/1987

Nationality: Egyptian

Social status: Marriage

Military status: Exempted

All references are furnished upon request.

Contact this candidate