Resume

Sign in

Project Electrical

Location:
Tamil Nadu, 621306, India
Posted:
October 03, 2016

Contact this candidate

CURRICULUM VITAE

BALAKRISHNAN KANDHASAMY C/*, Housing Board,

B.E.-Electrical & Electronics Karikkankulam Street,

acwvtd@r.postjobfree.com Manaparai-621306.

+91-868******* Trichy (District).

OBJECTIVE

To get into an esteemed organization, work in competitive and active environment, learn more and to be technically updated and seeking a challenging position that utilizes my education and skills for the development of the company and work with all my efforts for gaining the expected results of the company.

WORKING EXPERIENCE

Company : SE Electricals Ltd., Coimbatore

Designation : Engineering Trainee- Quality Assurance

Period : Sep 2010 to Apr 2012

Company Profile:

Since 1995 in India, Suzlon Energy with just 20 people has now grown into one of the major global leaders in the wind power industry. More than 6800MW installed capacity across 8 cities with No.1 position by market share for 13 consecutive years

Responsibilities:

BEFORE TESTING:

Performed wiring, safety routings of cables and assembled bus bars with enough clearance b/w each phases

analyzed the wiring diagram in panel

Verified the part list for corresponding panel by sap codes

Checked the components mounted as per design document (GA)

Inspected the ratings, supplier and the type of components used in panel as stated in bill of material

Visualized the panel physically and found the technical faults in panel wiring like wrong wiring, loose connections, wire missing, cable crimping etc.,

Reworked and re-inspected the reputable points and finalized whether they are perfect or not.

Then performed the torque inspection for each components terminals based on the data given

IN TESTNG:

Performed Megger test to find the insulation level of panel

Performed High Voltage Test for panel at 2.5KV

Again Performed Megger test to find the improvement in insulation level of panel

Then tested of whole panel functions by giving 690V, as per FTPC document

Company : Pure Tech India. Trichy.

Designation : Design Engineer_Electrical

Period : May2012 to Dec 2014

Company Profile:

Pure Tech India is knowledge based Clean Technology Equipment manufacturer of specialty engineering equipments put up in trec-step, Trichy, South India, a leading business Incubator under the Department of Science and Technology, Government of India.

Achievements:

Executed the commissioning of OIL Water Separator system Successfully in Indian Oil Corporation Limited at Asanur, Tamilnadu.

Carried out the commissioning of OIL Water Separator system Successfully in Indian Oil Corporation Limited at Chitoor, Andhra Pradesh.

Carried out the commissioning of OIL Water Separator system Successfully in Indian Oil Corporation Limited at Kandla, Gujrat.

Executed the commissioning of OIL Water Separator system Successfully in Pepsico India Holdings Private Limited at Kolkata.

Commissioned Coolant Filtration System in CECRI at Karaikudi.

Got the promotion as Project Co_Lead to the plant.

Responsibilities:

Executed the process design and Operation logics with electrical circuits.

Made Plant complete Electrical layout and sizing of components.

Established the type and arrangement of circuits, transformers, circuit-breakers and other equipment

Designed the electrical wiring diagram and single Line Diagram for control panel to control the system automatically and manually.

Created the design document like GA(General Assembly Drawing), BOM (Bill Of Materials), QAP (Quality Assurance Plan) etc.,

Designed the electrical equipment and instrumentation Sizes for control operations required in panel.

Designed the Control scheme for Hazardous area applications and outdoor applications

Performed research for the suitable designs regarding with vendor requirements and satisficaction.

Performed design using CAD Software.

Executed the designs depends upon systems.

Put the costing for the whole system and safeguarding.

Designed the motor ratings for pumps.

Derived the mechanisms and process of the systems.

Took interest on outside service and commissioning of the systems and maintenance.

Created work schedule and planning report for the production of Control Panel.

Company : Pure Tech India. Trichy.

Designation : Project Co-lead

Period : Jan 2015 to Still Now

Achievements:

Executed and completed “Indian Oil Corporation Limited” Project for Abu road terminal within 45 Days.

Carried out the better co-ordination with our team and Make them performed well.

Especially made procurement team as a faster performer by guiding the easy way to analyze the new vendors.

Executed and Completed “Indian Oil SkyTanking, Delhi” Project within the targeted period and successfully completed the erection & Commissioning of the same.

Completed “Indian Oil Corporation Limited, Jaipur” Project within the targeted period and successfully completed the erection & Commissioning of the same.

Executed two number of “Reliance Industries Limited” Project for Hazira & Dahej site at the same time and completed the same with effective cost & time.

Responsibilities:

Making the designed proposals for client’s requirements on waste water treatment, oil water separators, Media Filters, Carbon Filters, ETP, Skid mounted STP etc.,

Performing research on the client requirements and applying the solutions for the same through proposals.

Sizing the process equipments, electrical panel and instrumentations as per the scheme of projects.

Coordinating all department team members and allocating the time schedule to complete the project.

Making the costing for mechanical and electrical, Instrumentation for best proposals.

Executing the procurement process of Mechanical, Electrical, Electronics and Instruments for projects and providing clarification for the same.

Planning the completion of project within the allocated Budget.

Creating the work schedule to all departments and making them technically strong in the corresponding project.

Handling the client’s report and clarifying them to understand the project issues.

Being the single point of contact to all projects and clarifying the doubts about the process of the systems.

Updating the everyday schedule to all departments and organizing the technical meeting on every weekend.

Managing both technical and commercial team members and directing them to do the completion on every Project.

Conveying the requirements which are coming from Client side to our team members and guiding my team members to fulfill the client requirements.

Executing the approval for electriocal, mechanical, Instrumentation, Process drawings to the projects.

Doing R&D on economical control system in the project and Plant.

ACADEMIC CHRONICLE

Under Graduate

Degree : B.E (Electrical & Electronics Engineering)

Year : 2006-2010

Percentage : 70 % ( 1st CLASS)

University : Anna University (Others)

Higher Secondary Education – HSC

Year : 2005 – 2006

School : Bishop Heber Higher Secondary School, Trichy.

Percentage : 70 %

High School Education - SSLC

Year : 2003 – 2004

School : St. Andrews Higher Secondary School, Manaparai.

Percentage : 95 %

FINAL YEAR PROJECT

Project Title : “Dense Phase Pneumatic Fly Ash Handling System Using PLC”

Industry : NLC, Neyveli (TS- )

Implementation : Programmable Logic Controller

Project Description

The Main Objective of this project is to handle fly ash by using Programmable Logic Controller (PLC). Previously in NLC-TPS II, fly ash was handled by Relay Logic controller. Finally, we succeeded handling the same efficiently & effectively with the help of PLC.

In thermal power station, the control of ash conveying process from the hoppers below electrostatic precipitator (ESP) to main silos is done by using relay logic control. These relay logic control has been changed by an alternative programmable logic control. We split the whole ash conveying process into two sequence i.e., from (i) hoppers to intermediate silo and (ii) intermediate silo to main silo. Our project also includes the sensing of ash level present in the hoppers, timing control, pressure measurement and blower, all are controlled using PLC.

The main reason why we have taken up project is that: trail running is possible, timers and counters are available as software, it will support for future expansion, which are not possible in relay logic.

INDUSTRIAL EXPOSURE

Undergone Switchgear Training Programme conducted by L&T Switchgear, Coonur.

● Gained practical knowledge about contactors, circuit breakers Operations and

Mechanisms by supplied voltage

Attended In-plant training at Neyveli Lignite Corporation, Neyveli.

● Trained about practical operations of boilers, substation maintenance, generation of

Power

Undergone Industrial visit at Southern Railway, Trichy.

● Gained more things about electric locomotive operations, electric traction power supplies

SKILL SET

Languages : Basics in MATLAB

Subjects : Good knowledge in Windows, PLC, Auto-CAD & E-CAD

FIELD OF INTEREST

Environmental Pollution control Equipments

Power Systems

Electrical Machines

Power Electronics

Automobile Wiring

Innovative product observations

Electrical Testing and Design

SPORTS

Good cricket and football player.

Good volleyball player.

Good chess player.

PERSONAL DETAILS

Date of Birth : 20-12-1988

Gender : Male

Father’s name : M. Kandhasamy

Languages known : Tamil, English

Hobbies : Playing Chess, Listening to Music

Traits : Self motivated & Adaptable person

Permanent Address : C/6, Housing Board, Karrikkankulam Street,

Manaparai – 621306, Trichy (DT).

I hereby assure that the details given above are true to my knowledge and belief.

Place : Trichy Sincerely,

Date : 03.10.2016 (BALAKRISHNAN. K ).

ANNEXURE-I:

Current Location : Trichy, Tamil Nadu

Total Experience : 5-6 yrs

Passport Details

Passport No : M4085453

Date of issue : 02/12/2014

Validity : 01/12/2024

Notice Period : 1 month

Contact Details

: C/6, Housing Board, Karrikkankulam Street,

Manaparai – 621306, Trichy (DT),Tamil Nadu.

+91-868*******



Contact this candidate