Quality Control Power Plant
Resume:
MACARIO B. PALOLA, JR.
# *** *******, ********, **********, ***********
E-mail Address : ********@*****.***
Mobile No. : +63-929-***-****
Educational Attainment
Collegiate : Bachelor of Science in Mechanical Engineering
Luzon University
1992 – 1997
Trainings
RADIOGRAPHIC TEST FILM INTERPRETATION
Apex Engineering Services
Las Pinas City, Metro Manila, Philippines
Certificate No. N01916-2012-RTFI32-0001
Date of Seminar/Training: January 30 – February 2, 2012
ASNT – NDT LEVEL II – VISUAL TESTING (Welding Inspection)
Korean Non-Destructive Testing (KNDT) Arabia Co., Ltd.
Certificate No. KNDT-QP-LII-M10103
VALIDITY : 13 January 2014 – 12 January 2019
ASNT – NDT LEVEL II – VISUAL TESTING (Welding Inspection)
Qatar Fertilizer Company / Examiner : TEJPAL SINGH – ASNT ID No. 141147
Certificate No. 46/10/VT
VALIDITY : APRIL 2013 – MARCH 2018
Glassfiber Reinforced Polyester GRP (Vinylester/Epoxy - GRV/GRE) Lamination
Future Pipes Industry
State of Qatar
July 2009
Professional Experience
QA/QC Welding Inspector
Daewoo Engineering & Construction Company Ltd.
Safi Independent Electric Company
2x700 MW Coal Fired Power Plant Project
Safi, Morocco
December 10, 2015 – Present
Review and verify the quality control procedure as per relevant Codes and Standards.
Inspection of fit-up joint preparation and visual inspection of weld joint prior to commence full welding BEP, BOP, NBEP Piping.
Inspection of Condenser and Auxilliaries (fit up and visual)
Conduct inspection of materials and welding works in piping fabrication assembly and erection based on plans and specifications.
Conduct Welders Qualification Test
Ensure that established quality control procedures are maintained in all aspects of work.
Preparation of non-conformance report and recommend work rejection prior to the resolution and disposition of non-conformities. Prepare and schedule required NDT request including PWHT.
Conduct inspection fit up and welding works of HFO Day Tank, Condensate and Demi Water Storage Tank.
Conduct inspection of materials and welding works in piping fabrication assembly and erection based on plans and specifications.
Actively participates in site specific safety programs; watches for and reports safe and unsafe work practices
QA/QC Piping Inspector
Hyundai Engineering Co. LTD
Turkmenbashi Oil Refinery Expansion/Reconstruction Project
Turkmenbashi, Turkmenistan
May 19, 2014 – October 02, 2015
Review drawings, standards, specifications for inspection requirements
Perform QC inspection as required by the Inspection and Test Plan
Generate all QC Inspection Reports
Witness welder performance tests for client qualification
Inspect field welds to ensure compliance with specifications for level of quality required, maintain surveillance over contractor welding
Monitor the preparation and execution of postweld heat treatment in accordance with applicable approved procedures
Cooperate fully with the client’s discipline field representative(s)
Maintain copies for reports with respect to welders and their assigned symbols, welds completed, radiographic inspection and weld repairs
Ensure that all associated safety measures and correct procedures are in place for radiographic inspection
Perform other related duties as assigned
QA/QC Welding Inspector
Daewoo Engineering & Construction Company Ltd. / joint venture with Mitsui Company
Jorf Lasfar Energy Company (JLEC)
2x350 MW Coal Fired Power Plant Project
Jorf Lasfar, Morocco
March 2012 – January 31, 2014
Review and verify the quality control procedure as per relevant Codes and Standards.
Inspection of fit-up joint preparation and visual inspection of weld joint prior to commence full welding BEP, BOP, NBEP Piping.
Inspection of Condenser and Auxilliaries (fit up and visual)
Conduct inspection of materials and welding works in piping fabrication assembly and erection based on plans and specifications.
Conduct Welders Qualification Test
Ensure that established quality control procedures are maintained in all aspects of work.
Preparation of non-conformance report and recommend work rejection prior to the resolution and disposition of non-conformities. Prepare and schedule required NDT request including PWHT.
Conduct inspection fit up and welding works of HFO Day Tank, Condensate and Demi Water Storage Tank.
Conduct inspection of materials and welding works in piping fabrication assembly and erection based on plans and specifications.
Actively participates in site specific safety programs; watches for and reports safe and unsafe work practices
QA/QC Welding-Pipeline Inspector
MAPA-LIMAK-MNG Joint Venture
Saline Water Conversion Corporation (SWCC)/Pipeline Project
Ras Al-Khair – Riyadh Water Transmission System
Construction of 276 Km Pipeline from PS1 TO PS2 (Package B1)(72” Ø Pipe)
Jubail, Kingdom of Saudi Arabia
December 14, 2010 – December 24, 2011
Review and verify the quality control procedure as per relevant Codes and Standards.
Ensure that established quality control procedures are maintained in all aspects of work.
Perform site inspection (i.e. Material Receiving Inspection, Material Thickness Verification, Welding Inspection, Sandblasting, Joint Coating, Holiday Test, Cathodic Protection Test)
Conduct Welders Qualification Test
Preparation of non-conformance report and recommend work rejection prior to the resolution and disposition of non-conformities.
Notifies appropriate management personnel regarding quality audit and test results, ensuring that any defects are remedied appropriately.
Actively participates in site specific safety programs; watches for and reports safe and unsafe work practices
QA/QC Piping Inspector (UNDERGROUND FIBERGLASS PIPING) GRP
Hyundai Engineering and Construction Company LTD./ a joint venture with ENI/Saipem
Qatar Fertilizer Company – QAFCO 5 Expansion Project
Ammonia and Urea Plant
Mesaiied Industrial City, Doha, Qatar
September 20, 2008 – June 20, 2010
Inspection of Glass Reinforced Vinylester/Epoxy Pipes and Fittings (GRV/GRE) ranging from 50mmØ -3000mmØ upon delivery at Warehouse. (together with Future Pipes Industry Representatives)
Inspection of fit-up joint preparation and visual inspection of GRE/GRV Pipes prior for lamination/epoxy bonding.
Review fabrication/erection pipes, documents and work quality in terms of specification, workmanship and other variables as indicated in the above mentioned documents as per requirements of QC Standard Operating Procedure and client specification.
Perform visual and dimensional check on fabricated/piping spools and component to ensure compliance with ISO drawing and applicable codes and standards.
Preparation of non-conformance report and recommend work rejection prior to the resolution and disposition of non-conformities.
Monitor and prepare documentation on GRV/GRE pipe fabrication and site installation to determined and verify conformance to the project specification requirements.
Witnessing Field Density Test (FDT) for the dune sand prior for backfilling.
Notifies appropriate management personnel regarding quality audit and test results, ensuring that any defects are remedied appropriately.
Accompanies third party inspection groups ( Future Pipes Industry) on audits and monitors activities.
Prepares quality program records and documentation to ensure accuracy, thoroughness appropriate distribution and information quality.
Performs routine quality assurance assignments requiring independent judgment while supporting multiple crafts disciplines.
Actively participates in site specific safety programs; watches for and reports safe and unsafe work practices
Performs additional duties as assigned or as the need is apparent
Mechanical Engineer – Central Workshop
Engineering and Housing Directorate
Ministry of Defense and Aviation / Royal Saudi Air Defense Forces
Jeddah, Kingdom of Saudi Arabia
July 2006 – July 2008
Design and estimates ductworks in central air-conditioning;
Design and estimates steel structural, perimeter fence, parking shed;
Supervise maintenance works according to maintenance program
Supervise repair of generator set on site, making sure of its operation, operating the spare generator set in case of the delay in the repair;
Supervise maintenance/repair of all air compressors (screw and piston type) in all sites;
Supervise maintenance/repair of HVAC in all sites.
Supervise repair of all equipments brought to the workshop;
Supervise maintenance, repair, installation of pumps;
Review and checked the correct information/specifications of the purchased equipment before delivery to the warehouse;
Supervise steel fabrications, welding and machining works;
Visit sites and check conditions of all equipments;
Supervise workers in Central Workshop knowing their capabilities according to the work requirements taking into consideration of safety measures for the workers and equipments.
QC Piping Inspector
Consolidated Contractors International Company
Qatar Gas 2 Development Expansion Project (QGDP-2)
January 25, 2005 – May 19, 2006
Doha, Qatar
Inspection of fit-up joint preparation and visual inspection of weld joint prior to commence full welding.
Conduct inspection of materials and welding works in piping fabrication assembly and erection based on plans and specifications.
Ensure that established quality control procedures are maintained in all aspects of work.
Responsible for line checking, final inspection and transmission of all line cleared NDT requirements for Hydro Testing.
Review of test package document and submit to client for review and approval prior for Hydro / Pneumatic Testing.
Prepare and maintain QC inspection / test documentation for turnover to the client following completion for the project.
Prepares quality program records and documentation to ensure accuracy, thoroughness appropriate distribution and information quality.
Performs routine quality assurance assignments requiring independent judgment while supporting multiple crafts disciplines.
Actively participates in site specific safety programs; watches for and reports safe and unsafe work practices
Performs additional duties as assigned or as the need is apparent
QC Piping/Welding Inspector
Mohammed Al Mojil Group
Linear Alphine Olepines (LAO) Project
Jubail, Kingdom of Saudi Arabia
December 2003 – November 2004
Review and verify the quality control procedure as per relevant Codes and Standards.
Inspection of fit-up joint preparation and visual inspection of weld joint prior to commence full welding.
Conduct inspection of materials and welding works in piping fabrication assembly and erection based on plans and specifications.
Ensure that established quality control procedures are maintained in all aspects of work.
Responsible for line checking, final inspection and transmission of all line cleared NDT requirements for Hydro Testing.
Review of test package document and submit to client for review and approval prior for Hydro / Pneumatic Testing.
Prepare and maintain QC inspection / test documentation for turnover to the client following completion for the project.
QC Piping / Mechanical Inspector
GAMA Al Moshega S.A. LIMITED
SAFCO IV Expansion Project
Kingdom of Saudi Arabia
December 2002 – September 2003
Review fabrication/erection, documents and work quality in terms of specification, workmanship and other variables as indicated in the above mentioned documents as per requirements of QC Standard Operating Procedure and client specification.
Perform visual and dimensional check on fabricated/piping spools and component to ensure compliance with ISO drawing and applicable codes and standards.
Check and approve Daily Welding Reports (DWR) of completed weld joints per line number in daily production basis and mark-up on the ISO drawings for record and reference.
Preparation of non-conformance report and recommend work rejection prior to the resolution and disposition of non-conformities. Prepare and schedule required NDT request including PWHT.
Principal Engineer A/QC Inspector
LIGHT RAIL TRANSIT AUTHORITY
Department of Transportation and Communications
Pasay City, Philippines
January 1998 – December 30, 2000
Review fabrication/erection, documents and work quality in terms of specification, workmanship and other variables as indicated in the above mentioned documents as per requirements of QC Standard Operating Procedure and client specification.
Perform visual and dimensional check on fabricated/piping spools and component to ensure compliance with ISO drawing and applicable codes and standards.
Check and approve Daily Welding Reports (DWR) of completed weld joints per line number in daily production basis and mark-up on the ISO drawings for record and reference.
Preparation of non-conformance report and recommend work rejection prior to the resolution and disposition of non-conformities. Prepare and schedule required NDT request including PWHT.
Seminars
Grundfos Pumps
Philippine Society of Mechanical Engineers
Western Region, Jeddah Chapter
Kingdom of Saudi Arabia
September 2006
AUTOCAD DESIGN
Microcadd Technologies
Manila, Philippines
October 2004
AIR-CONDITIONING SYSTEMS OF COACHES
Marubeni Corporation/Toshiba/Mitsubishi Electric Corporation (MELCO)
Pasay City, Philippines
November 2000 - December 2000
Personal Information
Birthday : June 22, 1975
Birthplace : Dagupan City, Pangasinan, Philippines
Nationality : Filipino
Religion : Christian-Methodist
Height : 172 cm.
Weight : 80 kgs.
Passport No. : EB4811404
I certify that all written above are true and correct to the best of my knowledge.
Macario B. Palola, Jr.
Contact this candidate