Joshua Lee Taylor
Heavy Equipment / Diesel Engine / On-Highway and Off-Highway Truck Technician ; Industrial Maintenance Mechanic
I have been Trained and Certified to work on all types of Heavy and/or Construction Equipment, Diesel and Gas Engines, On and Off Highway Medium to Heavy Duty Trucks, Hydraulic Systems and Industrial Components. (i.e. Tanks, Vessels, Heat Exchangers, Reactors, Pumps,Turbines, etc.). I enjoy the challenges and rewards of repairing Equipment, and making them run like new again.
Cell Phone # 979-***-****
Normangee, TX 77871
Diesel Mechanic TST Construction Normangee, TX
2015-02 - Present
Repair and maintain construction equipment for private company.
Lead Technician 1 / Shop Foreman Penske Truck Leasing / Champion - Nalco Centerville, TX
2014-06 - 2015-02
Responsibilities
As Shop Manager / Lead Tech 1, I interacted with the customer, made up repair orders, located all parts needed for repairs, made up the P.O.'s, and performed needed repairs ( it was a small captive shop that had the maintenance contract for a large oil well service company; Champion - Nalco. I managed a small fleet of 20 Tractor / Trailer rigs and 14 Tanker trailers - Including Peterbilt, Freightliner, International, Kenworth.. Also I am Cummins Certified to perform warranty work and Electronic Control Diagnostics and Flashing / Reflashing engine parameters and other software.
Accomplishments
Cummins Certified, Flash ECM's Certified, and Warranty Work on Cummins and Detroit Diesels.
I completed 52 training modules,including training in Eaton transmissions, Allison trans., Navistar engines, and more . Also got experience with Service-Net and Parts-Net software, as well as Nexiq diagnostic equipment and programs.
Diesel / Heavy Equipment Technician Waukesha-Pearce Ind. Buffalo, TX
2013-06 - 2014-03
Responsibilities:
Preform all repairs as needed on heavy equipment from Komatsu, Bomag, Sennebogen, Takeuchi, Allied, and Waukesha Industrial Engines . Also working on Coal Mine sites repairing large mining equipment.
MSHA Mine Equipment experience - Texas Westmoreland Coal Co. In Jewitt, TX ; Kossee Mine - Luminant in Kossee, TX ; Big Brown Mine - Luminant in Fairfield, TX and Oak Grove- Luminant in Franklin, TX.
*MSHA Safety Corse Completed most recent September of 2013.*
Accomplishments:
Repairs and Troubleshooting Excellence certificate from Takeuchi Corp.
Lead Mechanic / Boilermaker and Quality Control Foreman Timec Co., P2S, Starcon Industries, J.V. Industrial, etc. Everywhere
2005-02 - 2012-07
Responsibilities:
Various industrial maintenance mechanical repair and instalation. Rebuilding and repairing valves, heat exchangers, condensors, steam systems and traps, and reactors.
Accomplishments:
Received a certificate of appreciation for quality from Chevron Corp. at El Segundo Refinery in Los Angeles, CA
Skills Used:
Completed training and internship and received a certificate as a Industrial Maintenance Mechanic from the NCCER.
Diesel / Construction Equipment Mechanic Mustang Tractor & Equipment Co. Bryan, TX
2001-06 - 2004-01
Responsibilities:
Repair Caterpillar Equipment and Engines. Also Worked and Interned at the Mustang Truck Shop in Houston during my training where I got experience repairing all types of Trucks and Rebuilding Transmissions and other Components on Peterbilt, Freightliner, Volvo, and Western Hauler just to name a few.
Accomplishments:
Received the Caterpillar "Think Big" Scholarship and Internship at TSTC.
Graduated with honors on the Deans List, Member of Phi Theta Kappa National Honor Society, 3rd in my class.
*Received Associates Degree in Diesel Equipment Technology With added Caterpillar specific O.E.M. training.*
N/A Agriculture Mechanization, General Studies Sam Houston State University
Huntsville, TX
2004 - 2006
A.A.S. - Associate of Applied Science Degree Diesel Engine & Equipment Technology Texas State Technical College
Waco, TX
2001 - 2003
Cummins Diesel Electric Engine Controls certified repair and programing (7 years)
Chevron Inc. Certificate of Appreciation
2007-10
Awarded Certificate of Appreciation for On-Time & Below Budget Repair of the ISOMAX Facilites Breechlock Heat Exchangers during the Emergency Turn-Around in 2007 at the Chevron El Segundo Oil Refinery in Los Angelas, CA.
Caterpillar ''Think Big" Scholarship - Mustang Tractor
2001-05
College Scholarship
Oakwood Youth Support Scholarship
2001-05
College Scholarship
V.F.W. Post 1907 2001 Scholarship
2001-05
College Scholarship
Hilltop Lakes Chapel Auxiliary Merit Scholarship
2001-05
College Scholarship
M.S.H.A. Certified to work at Surface, Coal, Metal/Non-Metal Mine Facilities
2013-09 - 2014-09
MSHA Certified To work in Coal Mines and Metal/Non-Metal Sites, or Surface Mining
ASE Certified R-12 Recovery & Recycle License - Applies to E.P.A Code 608 / 609 Regulations
2002-06 - Present
Ability to work with and purchase R-12 Refrigerant, Recycling and Collecting.
T.W.I.C. Certified, Background Checked, and Card Holder; Transportation Worker Identification Credential
2010-10 - Present
Ability to possess and maintain Transportation Worker Identification Credential .
N.C.C.E.R. Certified - Industrial Maintenance Mechanic
2007-02 - Present
Completed corse and quiz for industrial maintenance mechanic and received certificate from the National Center for Construction Education & Research.
Takeuchi Equipment Training Certificate
2013-11 - Present
Training and Parts Acquisition For Takeuchi Equipment.
D.O.T. Inspector Certification
2014-11 - Present
1. Certified Wheel End Alignment Inspector
2. D.O.T. Annual vehicle inspector certified + Heavy Truck and Equipment, Passenger Car, Motorcycle, and Commercial Inspector Licensed
3. Certified Brake Inspector
Cummins Certified (15 certs.)
2014-07 - Present
Eaton Transmission Training and Certifications ( 8 Certs. )
2014-02 - Present
Phi Theta Kappa
2002-03 - Present
PTK - International Honor Society - Alpha Omega Omega Chapter
Dean's List Member, 2001 to 2003,TSTC-Waco.
2002-05 - 2003-04
Awarded for holding a 3.5 or Better G.P.A. while earning my Degree at T.S.T.C. in Waco, TX
I have extensive Training from many diffrent manufacturers, and i have all documentation ready to show. Im willing and able to relocate, I'm currently single with no children, and im looking to start a long term and successful career - not just another job. Thanks for your time!