Resume

Sign in

Maintenance engineer RMC Precast MASA Crusher Workshop

Location:
Bangalore, Karnataka, India
Salary:
50000
Posted:
January 11, 2020

Contact this candidate

Resume:

CURRICULUM VITAE

Mohammad Naseem

Maintenance engineer

E-mail:acw2d0@r.postjobfree.com

Mob no:735*******

Key Result Area:

Development of Programmable Logic Controller (PLC) programs (Siemens, command Alkon), Configuring Human-Machine Interfaces (HMI).

Specification of PLC hardware including CPUs, I/O modules, and Bus interfaces, Knowledge of field bus protocols including HART communications, Profi bus, and Ethernet, etc.

Use of test equipment (Digital multi-meter, loop calibrator) for troubleshooting, commissioning, and plant start up, Knowledge of low voltage power distribution systems (Variable Frequency Drives, motor starters, heater controls, etc.).

Understanding of AC/DC electrical schematics, Specification of process controls instrumentation (pressure, temperature, flow, level), Develop cost estimates and manage project execution & automatic data acquisition systems.

Process analysis & instrumentation selection as well as Electrical control panel design.

I have sound knowledge of,

Operation and Maintenance of Elba, Xtech, O.Cuoghi, BHS, Al Kifah, Aquarius, Wiggert, SCHWING Stetter & Meka Batch Plants, Crusher& Sand Wash Plant, KERB & Masa Block Plant Ice & Chiller, Transit Mixer & Concrete Pump, Overhead Crane, Asphalt plant Generators Etc..

Repair and replacement of conveyor belts, pulleys, dust collection systems, bins, hydraulic and pneumatic gates and air compressor.

Plant's Electric/Electronic/ Hydraulic/ Pneumatic/Sensor & other safety Device Fault Maintenance & Repair, Plant Assemble and Dismantle as per specific catalog, manual book and drawing with safety norms.

Plant inspection before operation and after finished concrete production, like as Skip hoist rope, Mixer gear box, gear oil level, Hydraulic units, Pneumatic units, weighers, materials containers, conveyer belt, safety devices and other respective area as per schedule and check materials stock availability for ordered concrete mix.

Daily keep records or concrete production/material consumption/material stock and task reports submit from Plant Operators and Maintenance department and report to Operation manager.

Plant Installation, safety device installation, Cable lying, Relays and switching system assemble, Panel Board.

Planning and effecting preventive maintenance schedules of various machineries and instruments to increase machine up time and equipment reliability.

Well knowledge assembling and dismantling plant at construction sites.

Worked as a Sr. Maintenance Supervisor in Katerra India Pvt. Ltd. Krishnagiri Tamil Nadu, since Apr-2019 to till date.

Maintenance of the plant machineries (Ready-mix, Hollow Core Precast, EBAWA Concrete Distributer, Shuttering Robot,Mash welding plant, Lattice girder machine, Stirrup Bending Machine, ETP-STP, Generators, Forklifts Etc.

Maintenance of Hollow Core-Extruder E9, Saw Cutting Machine S5&P7, Bed master, Concrete Transport-Shuttle E9, Casting machine ELEMATIC).

Batch plant (AQUARIUS-CB90 & WIGGERT) Pulling device, Pre stressing Equipment (PAUL GMBH), Hydraulic jack hammer, Concrete Gantry crane, Water boiler etc.

Maintenance of Wall production – Concrete Distributor, Vibrators / Circular vibrators, Pallet Circulation/Pallet Stacker/Curing Chamber, Double wall tilting stations, Wall production – Concrete Distributor, Vibrators / Circular vibrators (EBAWE)

Maintenance of Shuttering Robot-SPR, Mesh plant- SWR, VGA Lattice Girder Machine, Stirrup Bending Machine (PROGRESS).

Batch Plant-Elevator Bucket,Rotating device, Pallet feeder, Product conveyor etc.

Maintenance of Overhead cranes (Demag 16-ton, 10-ton, 5-ton. 3.2-ton)

Received 33 KV from substation and using 2500 kva transformer converted into industrial purpose through power panels.

Maintain the planned preventive maintenance program and ensure timely reporting of all breakdowns with corrective actions.

Prepare daily breakdown reports for maintenance management.

Raising purchase requisition parts requisition and follow up.

Attend breakdowns promptly and effect immediate repairs.

Ensure timely reporting of all breakdowns with corrective actions.

Ensure stock of spare parts and consumable are available.

Worked as a Sr. Maintenance Engineer in Redx Industries Bahrain, since Oct-2017 to Oct-2018.

Ensure the service and maintenance of the plant and machines (Ready-mix, MASA, KERB, R.O. Pant, Ice &Chillers, Sand wash plant, Crusher & Precast)

Maintenance of Hollow Core-Extruder Machine E9 Saw Cutting Machine S5, Bed master, Pulling device, Hydraulic jack hammer, Concrete ganatry crane, Water boiler etc.

Maintenance of KERB Plant-Elevator Bucket, Machine, Rotating device, Pallet feeder, Product conveyor etc.

Maintenance of Overhead cranes(ABUS16 ton, 10 ton)

Maintain the planned preventive maintenance program and ensure timely reporting of all breakdowns with corrective actions.

Prepare daily breakdown reports for maintenance management.

Raising purchase requisition parts requisition and follow up.

Attend breakdowns promptly and effect immediate repairs.

Ensure timely reporting of all breakdowns with corrective actions.

Supervising and job assignments for the mechanics.

Ensure stock of spare parts and consumable are available.

Identify opportunities for process improvements.

Any other duties assigned by management.

Worked as a Maintenance Supervisor (Workshop & Plant’s) in Al Bina Ready Mix Concrete. Saudi Arab, since 09-Sep-2014 to May-2017.

Managing heavy equipment workshop to execute all types of maintenance and repair for the factory servicing equipment such as concrete plants, chillers, ice plants, generators, air compressors, conveyor belts, concrete recycling units, mobile and stationary concrete pumps, concrete transit mixers, dump trucks, loaders, forklifts, buses, service cars, vehicles, etc…

To ensure timely production after as per the shipping plan.

To ensure the quality of the product is maintained always in coordination with QC department and report immediately any variations.

To ensure that the plant works smoothly without any breakdown and coordinate with maintenance department for repair and maintenance

To monitor and guide the material movement in the plant for effectiveness

In the plant and keep track of the consumption/wastage.

To monitor and control the truck movement in the plant and site

To under take input-output analysis of the raw materials vs production.

To monitor material receipt/unloading process and authenticate the same.

To monitor and guide the plant control room for efficient and quick operation.

To perform special projects and analysis as required

To ensure business development by generating customer leads and converting them to confirmed orders as per Bina sales strategy.

Worked as a Plant Engineer in Unibeton Ready Mix. Jeddah, Saudi Arab, Since April-2013 to July-2014.

Monitor and handle all maintenance activities in 2 nos. Cuoghi plants, 3 nos. Chiller Plant, 2 nos. Ice Plant, 1 nos. Sand wash plant, 1 nos. Concrete reclaimer, 3 nos. Screen plant, 1 nos. Crusher plant and Weighbridge, Electrical and mechanical section.

Give instruction, technique and training to operators, technicians, helpers and other related sections for well performance during concrete production and task maintenance.

Give instruction, the required cleaning for equipment's and machines as per the work and after inspection.

Daily keep record and report to Operation manager about concrete production, material consumption, material stock and plant condition.

Preparing of monthly production plan & day-wise production schedules.

Prepare the daily Progress Report with daily manpower and productivity wise report.

Co-ordination with material planning for procuring material.

Raising purchase requisition parts requisition and follow up.

Monitoring the daily production as per priority.

To enforce the stringent safety practices and maintain good safety records.

Worked as a Batch Plant Supervisor in Contrack International INC. Afghanistan Since October-2009 to February - 2013.

Project: Under U.S Corp Engineering Camp Bastion Airfield Afghanistan

a- Construct Strategic Airlift Apron, Runway & Rotary Wing Parking, Taxiway and Charlie Ramp, Phase-1.

b- Cargo Handling Ramp, Phase-3

C-Merlin Capability. a- Munitions storage area and

Ammunitions Storage point.

b- CAS & ISR expansion project close Air support and intelligence surveillance and Reconnaissance

Achieve and execute prepared production plans like as confirm mix design, location, quantity provided from the Plant manager.

Give instruction, technique and training to operators, technicians, helpers and other related sections for well performance during production and task maintenance.

Performing minor/major mechanical/electrical/pneumatic/hydraulic repairs with technical team if needed.

Suggest changes in working conditions and use of equipment's and machines to increase efficiency of work.

Give instruction, the required cleaning for equipment's and machines as per the work and after inspection.

Daily keep record and report to Plant manager about production, material consumption, material stock and plant condition

Perform any extra duties assigned by direct Plant Manager.

Plant schedule maintenance, checking, Calibration and Function setting as required.

B.E in Mechanical Automation Engineering in 2007 from Maharishi Dayanand University Rohtak Haryana.

PERSONAL DETAILS

Father's Name

Mr. Aqeel Ahmad

Date of Birth

21st May 1983

Gender

Male

Marital Status

Married

Passport Number

T3356971

Valid Till

18/06/2029

Nationality

Indian

Language

English, Hindi, Urdu, Arabic

Permanent address

Ward No 7th Near Kabristan, Kichha, U. S. Nager Uttarakhand-263148

Correspondence address

1/226-3, Rajaji Nagar, 7th Cross Road, Krishnagiri, Tamil Nadu-635001

Place: Tamil Nadu (India ) Mohammad Naseem



Contact this candidate