Tooraj Rahmani M.Eng acvm27@r.postjobfree.com; Cell#+*(**6)706-

4234

Senior Electrical Engineer registered Professional Engineer (P.Eng & PEGNL)

engineering practice in different industries including Mining, Oil and Gas, Refineries, and

Water Treatment Plantst, EPCM projects experience in industrial Projects, Power

distribution, Power Generation, Renewable Energy, Discipline Technical Specialist to

initiate and execute power system studies. On site management, commissioning &

Start up, Commissioning, testing and inspection process in variety of projects mainly

energy project, material handling system, Mining, overhead lines (T&D), Transformers,

Switchgears, and substations, experience with Arc Flash Labeling and Electrical Safety

Program.

Qualifications:

MSEE Master Degree Electrical Engineer (Power) from University of Waterloo and

License Professional Engineer and PMI member

15 plus years relevant experience as Lead Electrical in consultant firm for factory

plants or utility environment and 10 years as Project Engineer responsible for

delivery design and construction packages.

Proficiency in Power Systems Software and programs, such as ETAP, SKM, Easy

Power, and EDSA. Recent projects utilizing ETAP for Short Circuit Calculation, Load

Flow study, Arc Flash and Harmonic Study, Transient and stability study, Motor

Starting, and overcurrent protective device coordination, and review of power quality

and reliability.

Designed electrical systems, developed Single Line Diagrams, Prepared Load List,

preformed voltage drop calculation, expert in power system analysis, short circuit

calculation and protective device and coordination studies.

Prepared detailed design drawings including: Schematics, Protection & Control,Layouts (Equipment, Cabling, Cable Tray, Grounding, Lighting),Single and three line

diagrams, Interconnection wiring diagrams),Communication block diagrams

Strong understanding of project management principles

Experience developing the I&C design on P&ID s.

Experience working in Hazardous area Material and Installation of Electrical

equipment (explosion proof) for Hazardous area.

Experience with Direct Digital Control (DDC), and Programmable Logic Controllers

(PLC), DCS, and SCADA system.

Preformed working with multi discipline project teams, poses leadership skills to

develop engineering team

1

Tooraj Rahmani M.Eng acvm27@r.postjobfree.com; Cell#+1(416)706-

4234

Demonstrate thorough knowledge and understanding of NEC, NFPA 70E,CSA, IEC

and IEEE standards necessary to design Electrical system

EXPERIENCE

2011 2016 Hatch, Mississauga, Ontario, Canada

Senior Electrical Engineer

Discipline lead responsible to prepare electrical design, calculation, system study,

multi discipline coordination, Perform quality reviews of project deliverables..

2

Tooraj Rahmani M.Eng acvm27@r.postjobfree.com; Cell#+1(416)706-

4234

Vale Long Harbour Processing Plant: Discipline lead Engineer responsible to

prepare electrical design, calculation, system study, and multi discipline

coordination. Provided technical input for P&ID s, Electrical, Mechanical, System and

Process Control, Piping, and input to Value Engineering Improvements (VEI).

Ontario Power Generation (OPG), Darlington Project, Ontario, Canada: Electrical

Engineer specialist: Reviewed work by Sargent & Lundy engineers and commented

on drawing/documents to ensure technical accuracy and Stamped drawings and

documents.

Kinross, Tasiast Gold mine, Senior Electrical Engineer: Responsible for electrical

design, Calculation, Studies, Designed, supervised construction, and commissioned

22 km of 33 KV Overhead Line, 33 KV/11 KV, and 33 KV/6 KV Substations,

Switchgears, and interconnection to 6.6 KV and 11 KV system existing systems.

Prepared relay coordination and setting, commissioned and energized 33 kV

overhead line.

Prepared ETAP modeling for Electrical Network Load flow, Short circuit, Protection &

Control. Prepared technical specifications, Equipment data sheets, Single Line

Diagrams, and Bill of Materials.

Site visit, Analysis of existing system and prepared modification to brown field to

upgrade the system to accommodate new loads. Prepared protection and metering

Single Line Diagrams.

Support field construction & commissioning for overhead line and substations 33 KV,

20 KV, 15 KV, 13.8 kV, 11 kV, 6.6 kV, 4.16 kV

Barrick, Peru, Lagunas Norte PFS project: Electrical Engineer Discipline lead for

electrical design, coordination and checking of required equipment and component

drawings for budget inquiry.

Air Liquide, Huston Texas: Electrical Site Engineer, On site management,

commissioning & Start up, Commissioning, testing and inspection

2006 2011 SNC LAVALIN INC., Toronto, Ontario, Canada

Senior Electrical Engineer

Accountable for meeting budget, schedule commitments and deadlines for Electrical

design on the project. Discipline Technical Specialist, Designed, and supervised

electrical team.

3

Tooraj Rahmani M.Eng acvm27@r.postjobfree.com; Cell#+1(416)706-

4234

SNC Nuclear, Hydro Quebec, Gentilly2 Power Plant Project, Quebec Canada:

Electrical Engineer specialist: Prepared electrical system protection philosophy,

ETAP modeling for Electrical Network, Load flow and short circuit calculation, Motor

starting analysis, Protective Relay coordination.

Plasco Energy Group INC., Plasco Central Alberta: Waste Conversion Facility:

Electrical Engineer Specialist: Prepared ETAP modeling for Electrical Network, Load

flow and short circuit calculation, Motor starting analysis, Harmonics study,

Protective Relay coordination, and Arc Flash study. Prepared technical specification

and Equipment data sheets.

MOL Makori Gas Process Facility, Pakistan: Lead Electrical Engineer: Team Leader

for Electrical work activity, Designed and prepared electrical system protection

philosophy, Load flow, short circuit, Motor starting, and Harmonics study. Prepared

technical specifications, Equipment data sheets, Single Line Diagrams, Schematics

and Bill of Materials.

Saskpower, Saskatchewan Canada: Electrical Engineer Specialist: Prepared

electrical system protection philosophy, ETAP modeling for Electrical Network, Load

flow and short circuit calculation, Motor starting analysis, Harmonics study,

Protective Relay coordination, and Arc Flash study. Prepared technical specification

and Equipment data sheets.

Valero Benicia Refinery, California, USA Electrical Engineer Specialist: Prepared

Technical Specifications and Equipment Data Sheet for Power Transformers, MV

VFD s, MV MCCs, and MV Switchgears. Prepared RFI s, Vendors bid evaluation,

RFP s, Designed and prepared Schematic drawings, ETAP modeling for Electrical

Network, Load flow and short circuit calculation, Motor starting Calculation,

Protective Relay Coordination, and Arc Flash study.

NAC/SAC Radford Modernization, Radford, Virginia, USA Lead Electrical Engineer:

Prepared budget estimates, Designed and prepared Single Line Diagrams(SLD),

Cable Schedules, Schematic Diagrams, Lighting, SKM modeling for Electrical

Network, Load Flow and short circuit calculation, Relay coordination, Arc Flash

study, and grounding system calculation.

BIOX Hamilton Startup Mods, Hamilton, Ontario, Canada : Lead Electrical Engineer

designed and prepared single line diagrams, cable schedules, schematic diagrams,

Instrument and control drawings, heat tracing, Lightning protection, and prepared

specification

4

Tooraj Rahmani M.Eng acvm27@r.postjobfree.com; Cell#+1(416)706-

4234

2004 2006 Ausenco/Sandwell CONSULTING ENGINEERS LTD, Burlington, Ontario

Senior Electrical Engineer

Ford Motor Company 10 MW Peak Shaving Power Plant, Oakville Ontario, Canada:

Designed and Prepared single line diagrams, power and control layout drawings,

Substation Design and protective relay Coordination, cable trays and conduit layout

drawings, lighting and grounding layout drawings, control schematics, wiring

diagrams, cable and conduit schedules, short circuit study and electrical

specifications.

General Motors Air Make Up System, St. Catharine s, Ontario, Canada: Designed

electrical system. Prepared power and control schematics and wiring diagrams,

technical specification, bill of materials, and cable and conduit block diagrams.

Conducted site work, analyzed existing systems, prepared upgrade system,

designed lightings.

Toronto Hydro Cogeneration Project, Toronto, Ontario, Canada: Designed single line

diagram and prepared protection system philosophy. Designed and sized the

grounding transformer.

2002 2004 McViro Environmental consultant, Thornhill, Ontario

Electrical Engineer/Instrumentation and Control Engineer

Humber Water Treatment plan: Toronto, Ontario, Canada: Developed the I&C design on

P&ID s. Experienced developing/designing control panels which house

DDC/PLC/DCS systems.

Designed SCADA network block diagrams, Designs control panel layouts

Developed control strategies, Selects instrumentation

Prepared specifications for instruments, computers, networking equipment, PLCs

and associated components

Practiced working in Hazardous area Material and Installation of Electrical

equipment (explosion proof) for Hazardous area.

2001 2002 ELECTRICAL CONTRACTORS COMPANY, Thornhill, Ontario

Electrical Contractor/ Electrical Lead Expert/Project Manager

High Voltage and Low Voltage works, Design, Supply, Installation, Testing and Commissioning.

5

Tooraj Rahmani M.Eng acvm27@r.postjobfree.com; Cell#+1(416)706-

4234

Design, Supply, Testing and Commissioning of switchgear, MCC,s for sub stations

Installation and termination of Transformers, DG sets

1996 2000 TAKESTAN ENGINEERING: Electrical Lead Engineer

Managed multidiscipline engineering team, Ensured quality control by troubleshooting, and

resolving technical problems. Designed and built automation panel with programmable logic

controller (PLC) and PC as human machine interface (HMI) for batch plant/ glass recycling.

Calculated and designed electrical network, and power substation. Designed and prepared

electrical distribution drawings, lighting and emergency systems. Designed and built control

panel for glass furnace using PLC and P&ID controllers. Commissioned glass furnace control

system and production machines. Installed and tested operation and performance of all

electrical machinery. Scheduled tasks, deadlines and milestones for all stakeholders and

resources. Implemented and manage critical paths/milestones and monitoring mechanisms for

the project.

1992 1996 RAZI PHARMACEUTICAL GLASS FACTORY, Takestan, Zanjan

Senior Electrical Engineer

Installed and maintained power substation, power switchgears, medium/low voltage,

20 kV electrical distribution and 220/380 V secondary distribution system.

Implemented electrical power grids and commissioned control system. Troubleshot

electrical and electronic systems. Installed and overhauled turbo generators and air

compressors. Developed maintenance and operating standards for electrical and

electronic systems.

Experienced Direct Digital Control (DDC system), and Programmable Logic

Controllers (PLC).

PROFESSIONAL DEVELOPEMENT

2014 Master of Electrical Engineering (MEE Power) University of Waterloo

2009 ETAP: Advance Course, Edmonton, Alberta, Canada

2008 ETAP: Load Flow Calculation, Short Circuit, Motor starting, Arc Flash

Study, Toronto, Ontario, Canada

2007 Power Tools for window, SKM Software, SKM System Analysis Inc.,

2007 IEEE Power System Application, IEEE Power Engineer Society

(PES), Toronto, Ontario, Canada

2007 Micro station, City College, Toronto, Ontario, Canada

6

Tooraj Rahmani M.Eng acvm27@r.postjobfree.com; Cell#+1(416)706-

4234

2006 Professional Engineer PEO

2004 Canadian Electrical Code and Ontario OH&S Act & Regulation,

George Brown College, Toronto, Ontario, Canada

2004 Technology report writing, OACETT, Mississauga, Ontario, Canada

2003 Robotic System, Centennial College, Scarborough, Ontario, Canada

2002 AutoCAD, York dale S.S.A.L.C., Toronto, Ontario, Canada

1997 VLAN and Servomechanism, Emhart Glass Co, Sundsvall, Sweden

Siemens PLC S7 and S5 Programming, at Siemens

1996

1988 BSc. Electrical Engineering (EE Power) University of Tabriz

COMPUTER APPLICATION

ETAP, SKM, Easy power, MS Project, AutoCAD, Micro Station, MS Office,

Power Point, Excel

PROFESSIONAL ASSOCIATIONS

Professional Engineers Ontario, P.Eng. Registration No: 100098481 since 2006

Project Management Institute (PMI) member, PMI ID#3229252 since 2008

Certified Engineering Technologist, OACETT No: 823083 since 2004

ESA Master Electrician License #6006979 and Contractor License

7

Contact this candidate