Operator Cnc Machinist

Pedro J. Colon P.O. Box **** *****

Fort Worth, TX 76114

520-***-**** – Email ********@*****.***

Objective: CNC Operator or Manual Machinist

Qualifications:

• 26 years’ experience as general machinist (Manual machinery) • 24 years’ experience as CNC machinist.

• State and college certifications as Machinist & Die Maker. • Experience with ISO Standards.

WORK HISTORY: LONG TERM/PERMANENT JOBS

CNC Mills Operator/Set up

HRK ENTERPRISES INC. Fort Worth, Texas Sept to November 20, 2014

Duties: Set up and operated two CNC Mills, (Fadal and Heundi) some editing of program and downloading. Light observing of QC but sustaining tolerances into .001. Select tooling etc. Some drilling and tapping at manual Mill or regrind manually some drills.

Position: CNC and General Machinist.

Mills Operator/ Set up

PROGRESSIVE INCORPORATED (by Staffing Co.) Arlington, Texas 2014 – Part Time Temp.

Duties: Set up large Mills and operate. Download some 12 to 15 tools into the tool changer, touch each one etc. Download program and run machine to rough large airplanes parts (titanium steel or aluminum) and stacked. Fill the adequate book of checks etc.

Position: Mill Operator

CNC Operator/ Set up

WAPLES MANUFACTURING INC. Fort Worth, Texas June 2013 to March 2014

Duties: Operate mainly Okuma CNC lathes and some set up: Run production and keep observing the ISO standards recently established by the company. Offset any values required on Axis (machine control panel) to keep tolerance of the part and sometime a little editing of the program. Parts were inspected twice per shift at the Q.C. department. Move parts to next machine if was secondary operation and kept some light ISO paper work.

Position: CNC Lathes Operator.

CNC Mills Operator/Set Up

FORE MACHINE CO. (By Staffing Co.) Haltom City, Texas 2012-2013 Temp. Assigment

Duties: Set up/download programs and some editing. Made many fixtures or remake. Operate the machine, keep track of quality on ISO report paper work. Check dimensions and quality of part as the requirements of fabrication specified using diverse precision instruments from micrometers gages etc to oscilloscopes from quality control room etc.

Position: CNC Machinist/Set up

CNC Machinist Operator/Manual & Set up

GST MANUFACTRING LTD. Haltom City, Texas June 11, 2012 –Sept. 2, 2012

Duties: Set up/Programming and operate a Horizontal Haas Mill. Also operate and set up a Fadal vertical mill. Set up and operate Manual mills and Lathes.

Position: General Machinist and Set up.

CNC Machine operator & Set up

WEIR-SPM Fort Worth, Texas August 22, 2011-May 8, 2012

Duties: Operate a CNC Mori-Seiki horizontal mill (4 axis) to rough variety of parts that will be finish to machine in a Travisan horizontal lathe-mill. Also help to operate other machinery like 2 axis Mazak lathes and 5 axis mill-lathe, small Mori Seiki lathes and a Travisan mill, if my main machine has not work. These other machines I operated under the supervision of their regular operators to help with production.

Position: Machine Operator Level IV.

CNC Machinist/mill Operator & Set up

J-MAC Tools Fort Worth, Texas April 29, 2010- August 3, 2011

Duties: Set up, operation & program editing of CNC mills. After a while trained new employees in procedures and operation of the machines. Company made products for Fracture and pumps Oil Industry.

Machines: Hass, Leadwell and Daewoo – Kia Mills from medium to large sizes, some three axes.

Position: Operator & Set up.

CNC Machinist/Operator Programmer February 22, 2008 – August 14, 2009

ALL PRO PRODUCTS INC. Arlington, Texas

pjc cont. resume

Duties: Operation, set up, manual input Programming of CNC Lathes and a Mill and manual machines. Assigned a place to a operator to run production. Inspection of part, organization of building and closing, etc.

Machines: CNC lathes Kia-Hyundai (new), Mori-Seiki, Hitachi and Okuma (old models) Hurco Mill.

Position: Assigned as Supervisor night shift and other duties.

CNC Machinist Programmer/Operator/Technician Engineer Support

R & B ELECTRONICS Grand Prairie, Texas February 27, 2005 to June 7, 2007

Duties: Programming/ Operator and provide technical support for engineers at main facility in Michigan. Use of AutoCAD to create auxiliary drawings for creation of programs or preliminary presentation of a product. Created data files (in/out communication) to all CNC machines (editor communication) with the computer (Win-2000). Used Win-2000, to create programs for CNC lathe or mill. Perform some technical engineer support duties for new projects or improve others.

Machines: CNC lathes (Cincom L32, Cincom B12 (5 axis), Miyano 20, 34T Miyano, Hardinge Conquest and GT. CNC Kitamura Mill and Hurco mill. Other manual shop equipment.

Position: CNC Programmer/Machine Operator.

CNC Machinist/Operator

Consolidated Casting Corp. Hutchins, Texas Feb. 9 to Dec. 30, 2004

Duties: CNC operator of Lathes and mills and some manual machines. Inspection of parts etc.

Machines: CNC Hardinge lathes, LeadWell, Hurco mills CNC and some manual machinery.

Position: Set up/operator of CNC lathes.

CNC Router Operator

Thermoforming Products Inc. Cedar Hill, Texas Nov. 2003 – Feb. 9, 2004

Duties: Set up/Editing programs of CNC routers and operation. Check the parts.

Machines: Two double bed CNC Routers (G&M codes)

Position: CNC Router operator for plastics Finished Products created on thermoforming molds.

Milco Specialties Inc. Stephenville, Texas July 18, 2002 – Feb. 20, 2003

Duties: Operator and set up of CNC lathes and Mills also operation of manual mills, lathes, and drill press. Engraving parts etc.

Editing of programs for the CNC lathe etc.

Machines: Warner & Swasey, Okuma lathes, Fadal mill CNC and manual lathes and mills etc.

CNC Machinist and General Machining

Position: CNC Machinist/Gen. Machinist

CNC lathe operator

Parker Hannifin Corp. Elyria, Ohio August 28, 2000 – July 8, 2001

Duties: Set up CNC lathes, download programs and edit, set the precision inspection tools and operate machines. Sometimes operate CNC screw machines and manual mills. The five axis lathes operate two programs simultaneously with live tooling. Totally inspection of the parts.

Machines: Traub CNC lathes (three turrets -5 axis) CNC and some manual horizontal/vertical mills.

Position: Operator /set up/ Machinist of CNC Lathes.

Kirkwood Industries Inc. Cleveland, Ohio Sept. 14, 1998 – June 4, 2000

Duties: Operator of several CNC/NC lathes and set up. Edited programs. Some manual machinery operations. Inspection of production etc.

Machines: Hardinge CNC lathes and manual Warner & Swasey lathes and other equipment.

Position: Machinist CNC Operator/Gen. Machinist

CNC machinist

Denton ATD, Inc. (Applied Safety Technologies Corp.) Milan, Ohio June, 27, to November 22, 1997

Duties: Editing and update programs for CNC mills. Set up and operation of the CNC mills also updated fixtures and jigs for the main product of the company (TEST CRASH DUMMIES). Some manual machines operation also. Parts Inspection using my own tools.

Machines: CNC HAAS mills

Position: CNC Machinist/Operator

General Machinist

Latanick Equipment Corp. Huron, Ohio Feb 2 to June 7, 1997

Duties: Set up and operation of manual lathes, mills, press drills, rotary drills, surfaces grinders, saws, etc. Make complete parts according with a blueprint. Also make some fixtures and dies for outside companies.

Position: Machinist

pjc cont. resume

CNC Operator and Gen. Machinist

Stein Inc. Sandusky,Ohio May, 1989 to June 20, 1996

Duties: Set up, operation and programming CNC mills and lathe. Also operation of manual mills, lathes, press drills, cut off saws etc., machine shop equipment and also fabrication manual equipment like brake press, shears etc. Received training in problem solving, Teamwork and ISO standards. I received State Certification as Journeyman machinist after finished an apprenticeship. Other general duties include machine assembler. Seven years of work services.

Machines: CNC Hurco-(conversational prog.) and CNC Monarch mills, CNC Mazak-(mezatrol prog.) lathe.

Position: CNC machinist/programmer/operator and Gen. Machinist.

(7years of services at the company with school and training)

SHORT -TERM JOBS: 2009/2010

Nex Tech Aerospace - Dallas, Texas (March to April-8-10)

CNC machinist operator.

Duties: Set up and operation of multiple spindle Mills-Routers to machine large parts for airplanes.

Imex Veterinary Inc. – Longview, Texas. (Contract Sept. 28-Nov. 19-09)

Machinist operator of: CNC lathes Cincon L24 (Swiss type) and 3 axis CNC Leadwell mill.

Duties: Set up and operation CNC lathe and mill and manual machine shop equipment. Veterinary instruments main products.

June 2007/2008

Light programming/editing of lathe and mills (Several type of lathe, mills, operated grinders etc machinery). This employment period run from mid June 2007 to first week of January 2008. This short term jobs are based in temporary assignment from staffing agencies, short contract straight with employer or I terminated the employment for reason of safety or inadequate environment.

Other skills: Work experience as maintenance/set up for industrial printing machinery from 1986 to 1988. Drafting

Classes: AutoCAD versions 13/14 and introductory classes of the Solid Works CAD software.

pjc cont. resume

CNC Programming Classes: Introduction to Smart Cam, Esprit and Solid Edge software programming for CNC machines.

See LCCC below.

Manual entry programming of lathes and mills with Fanuc Controls from 1993 to 2001, also Mezatrol for lathes.

Welding classes and some work experience in Tig, Arc, and Mig. Machinery assembler and also of the electrical boxes

components and equipment.

Classes : Master Cam programming introduction - Versions X3/X4 at Mountain View College, Dallas-Texas (Jan/April 2010).

Education

Lorain County Community College Elyria, Ohio 1997 to 2000

Certificates in Principle of Robotic and Industrial Maintenance program-(1983). Classes toward Certifications of Proficiency in Computer Aided Design Operator (CAD-Drafting) and Computer Numerical Controlled Machine Programming (CNC Programming) from 1997 to 2000.

Terra State Community College Fremont, Ohio 1986 to 1989

Received a Tool and Die/Machinist Certification of Proficiency. Classes in Mechanical Manufacturing Methods and Mechanical Engineering (Machine Design curriculum) also Industrial Plastic field.

Salary history upon request and interview

Contact this candidate