Heavy Equipment Mechanic
Resume:
HILARY HAMAD MOHAMED
P.O.BOX****
KAHAMA
Dear Sir/Madam,
REF:APPLICATION FOR THE POST OF MECHANIC
Refer to the heading above my eight (8) years working experience with different machine in the mining industry and exploration gives me confidence of delivering a maximum quality of work in your organization under the above mention position. I’m holder of a valid international Passport and Tanzanian Driving license class “E” For the last four consecutive years I have been working with Barrick Buzwagi Gold Mining. (ACACIA) mining in Tanzania in maintenance department as a heavy mobile Equipment mechanic. Here, I have gained a lots experience and knowledge through training. I hope that my application will receive a favorable reply from you. Thanking you in advance and looking forward to hear from you soon. Yours sincerely,
Hilary hamad Mohamed
Please feel free to contact me via this e-mail address E-mail:********@*****.***
Fax: Nil
Cellular phone: +255-***-***-***
CURRICULUM VITAE
1. PERSONAL DATA:
Surname Mohamed
Name Hilary hamad
Qualification Heavy mobile equipment mechanics
Year of birth 1988
Place of birth korandoto shinyanga
Marital status Single
Language English & swahili
Sex Male
Religion Muslim
Resident Shinyanga
Nationality Tanzania
E-mail ********@*****.***
Mobile phone +255-***-***-***
Licensed Tanzania Driving License Class ‘’E’’ No. 400******* Passport No. AB769645
PERSONAL PROFILE:
Highly motivated person and work independently under minimum supervision good interpersonal skills and ability, strong communication skills with ability to work effectively within timely management atmosphere, working independently under short reporting deadline, fluent in English & Swahili Languages, with High experience in Mining work and Exploration site. 2. CURRENT POSITION AND TASKS:
27 Jan 2012 to Present Heavy Mining Equipment Mechanics African Barrick Gold Company L T D
Buzwagi Mine – Kahama,Tanzania
P.O.Box 23153 Oysterbay, Dar es Salaam
Office Phone Tel(+255 22) 2600 604 Ext 2034
Fax (+255 22) 2600 604
3. WORK EXPERIENCE:
Jan2012 – to Date In 2012 I have been employed by ACACIA Gold Mine Company as a Heavy mining equipment mechanics
Duties and Responsibilities.
To troubleshooting hoist pump on CAT 3PR DT777D.
To attend breakdown on CAT 3PR DT777D Engine shutdown it self.
To attend PM service on CAT AGC DT777D.
To change dual con seal on CAT AGC DT777D.
To troubleshooting steering system on CAT 3PR DT777D.
To refill Air condition gas on CAT AGC DT777D.
To change the track chain on D8R Dozer.
To attend PM service on Bell Truck B50D.
To Change Truck shoe for D8R Dozer.
To attend PM Service on Liebherr Excavator.
To change the sprocket and track chain on Liebherr Excavator
Change the hoist Cylinder for Cat777D
To attend PM Service on caterpillar engine C18 water pump.
To attend breakdown on Bell truck B50.
To attend breakdown on Liebherr Excavator.
To attend breakdown on D8R dozer.
To attend PM service on D8R dozer.
Attend the training for BELL TRUCK.
Attending basic training on hydraulic and pneumatic
To change the equalize bar for Dozer D8R.
To change the swing brake disc for Liebherr excavator.
To change the truck chain assembly for dozer D8R
To attend PM service on Excavator PC4000D-6
To change the steel pipe for bucket cylinder for Excavator PC4000D-6 super shovel due to hydraulic oil leakage.
To Troubleshooting Excavator PC1250 due to engine coolant overheating.
To Attend PM service on HD 1500-7 Dump truck.
To repair grease system for wheel loader WL900.
To remove the radiator And replace the new one for HD1500-7 dump truck
To change the Exhaust tube for HD1500-7 dump truck.
To attend mechanical inspection for Excavator PC4000D-6 Super shovel.
To change bucket cylinder for Excavator PC4000-6 due seal worn out.
To install truck chain for Excavator PC4000D-6 and tension the track chain.
To reseal truck tensional for Excavator PC4000D-6
To install bucket for Excavator PC4000D-6 due to bucket worn out.
To repair grease system on Excavator PC4000D-6.
To change the truck chain for D375-6 Dozer.
To change swing motor for PC4000D-6 Excavator.
To re-torque truck chain for PC1250 Excavator.
To change the hoist pump for HD 1500-7 Dump truck.
To change the turbo charger for HD785 Dump truck.
To remove the differential final drive for HD1500-7 due to crown wheel worn out.
To install truck chain for PC4000D-6 Excavator.
To charge rear suspension for HD 1500-7 Dump truck. BARRICK BULYANHULU GOLD MINE
Aug 2010 - Aug2011 In 2011 during my training I worked as a Heavy Equipment
In major component and rebuild shop.
Duties and responsibilities
To Rebuild Deutz engine F6L912 and Test.
To Rebuild Detroit engine series40, 60 and Test.
To Rebuild Torque convertor and Test.
To Rebuild Transmission for scoop 1400 and Test.
To Reseal Hydraulic cylinder for 151 scoop and Test.
To Rebuild C18 CAT Engine.
BARRICK BULYANHULU GOLD MINE
Aug 2009 – Aug 2010 As a part of field work I worked as a drill Mechanics Trainee in underground Mining.
I worked with Jumbo Drill Machine, Cubex and Quasar Duties and responsibilities
To attend PM service on Quasar.
To change the articulation pin for Jumbo drill machine.
To change boom cylinder and replace new one.
To attend breakdown on cubex machine.
To attend breakdown on Jumbo drill machine.
To troubleshooting the engine shutting down by itself on Quasar.
To remove the engine on Quasar machine and replace another one.
To fix new hoses and repair the boom on Jumbo drill machine.
To attend breakdown on Quasar machine.
To test the drifter.
To charge the accumulator for High and Low pressure for drifter in jumbo drill machine.
To change the Radiator and replace new one.
To attend PM service for Jumbo drill machine
To change drifter for Jumbo drill machine and test.
To attend PM service on Cat articulated Dump truck.
To attend PM service on Cat Excavator.
To attend PM service on Fork lift (MANITOU).
To attend breakdown on Cat articulated Dump truck.
To remove the boom cylinder for Cat Excavator.
To change the sprocket for Excavator.
To remove the real final drive for Cat dump truck For mechanical inspection.
To remove the pinion gear from the real differential for scania.
To remove propeller shaft for the front wheel for MANITOU and change the spider.
To fix new bucket teeth for cat wheel loader.
To attend breakdown for wheel loader.
To attend PM service for scania.
To clean the radiator for Scania.
To remove the Engine and Transmission for wheel loader.
To troubleshooting hydraulic system for fork Lift (MANITOU). 4. ACADEMIC QUALIFICATIONS:
Integrated Mining Technical Training (IMTT).
2009Jan – 2011Nov Sponsored by barrick bulyanhulu Gold mine as apprenticeship in Heavy Equipment Mechanics for three years at IMTT Moshi
Graduate certificate of Integrated Mining Technical College IMTC ONE (1), TWO (2) and HME Trade Test certificate. BUGARAMA SECONDARY SCHOOL.
Jun 2005 – Oct’2008 Graduate Certificate of secondary Education(O-Level). P.O. Box 1019 kahama.
School admission no.051.
MAGANZO PRIMARY SCHOOL.
Jan1998 – September 2004 Graduate Certificate of Primary Education REFEREES
1. Mr. Dan Ombiro
IMTT Workshop superintendent,
VETA MOSHI
Mob: +255-***-******
E mail: ****@****.**.**
2. JD Kleinhans
IMTT Programmer Administrator
VETA MOSHI
Tanzania.
Mob: +255-***-***-***
E mail: ****@****.**.**
3. DEODATUS MAXIMILIAN
Work shop first line leader
Mob: +255-***-***-***
Buzwagi Gold Mining
Box 1101,Kahama
Contact this candidate